{"title":"Heater Sports","description":"","products":[{"product_id":"heater-basehit-fastball-variable-speed-real-baseball-pitching-machine","title":"Heater BaseHit Real Baseball Pitching Machine with Auto Ball Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Heater BaseHit is a compact, real-baseball pitching machine built for solo batting practice at home, in the backyard, or at a local field. It throws regulation baseballs up to 45 MPH and lite-baseballs up to 60 MPH, with an adjustable pitch height that lets the same machine deliver fastballs, pop flies, and ground balls. For families with a youth baseball player who is ready to move past tee work and parent-pitched soft toss, the BaseHit bridges the gap between coach pitch and a full-size commercial pitching machine without the price tag of a training facility unit.\u003c\/p\u003e \u003ch2\u003eHow the Heater BaseHit Builds Better Hitters\u003c\/h2\u003e \u003cp\u003eQuality repetitions are what separate a player who shows up to games cold from one whose swing is grooved. The BaseHit delivers those repetitions on demand. A 12-ball automatic feeder drops a baseball every ten seconds into the machine, which means a hitter can take a full round of swings without needing someone to toss balls or reset the machine between pitches. Over the course of a single practice session, that translates to hundreds of usable cuts rather than the 40 or 50 a parent or sibling could realistically hand-feed before their arm wore out.\u003c\/p\u003e \u003cp\u003eThe machine uses a single six-inch wheel paired with a fast-spinning, dual-bearing electric motor. That compact wheel cushions the baseball as it leaves the housing, which keeps pitches consistent from swing to swing. Consistency matters more than raw velocity for most hitters working on mechanics, because the batter's eye calibrates to a predictable release and timing pattern. When the pitch arrives in the same spot, at the same speed, every time, the hitter can isolate what they are working on rather than re-adjusting for a wobbly machine.\u003c\/p\u003e \u003ch2\u003eVariable Speed Control for Every Level\u003c\/h2\u003e \u003cp\u003eBaseHit's variable speed dial lets users set pitch velocity anywhere from slow, beginner-friendly pitches up to the top-end 45 MPH with real baseballs or 60 MPH with lite-baseballs. That range covers a lot of developmental ground. A seven or eight year old just getting comfortable tracking a moving ball can start at the low end. A middle schooler working on inside-out hands or letting the ball travel deeper can crank it up. And because pitch speed scales with distance, a player can pull the machine closer to simulate a faster perceived pitch or move it back to give themselves more reaction time.\u003c\/p\u003e \u003cp\u003eThe lite-ball option is worth understanding. Lite-baseballs are foam or plastic training balls that weigh roughly a third of a regulation ball. When the machine hits them at 60 MPH, the perceived pitch speed at the plate is meaningfully different from a real baseball at the same velocity because lite-balls decelerate faster through the air. Many coaches use lite-balls for indoor work or in tight spaces where a real baseball would cause property damage, and the BaseHit handles both ball types from the same machine with a speed adjustment.\u003c\/p\u003e \u003ch2\u003eAdjustable Pitch Height for Hitting and Fielding Drills\u003c\/h2\u003e \u003cp\u003eA pitch height knob on the housing lets you angle the throwing mechanism up or down. Pointed level, the BaseHit throws fastballs across a typical strike zone. Angled up, it delivers pop flies for outfield practice. Angled down, it rolls out ground balls for infield work. That versatility matters for families that use the machine with more than one player or for practices that combine hitting and fielding drills in the same session. A baseball coach running a small clinic can set up stations: one kid hitting off the machine at the normal angle, two kids fielding grounders or pop flies from the same unit after a quick knob adjustment.\u003c\/p\u003e \u003ch2\u003eBuilt for Backyards, Not Just Facilities\u003c\/h2\u003e \u003cp\u003eThe BaseHit is designed around a tubular steel tripod stand that snaps together with three pushpin legs. No tools are required. Pull it out of the box, extend the legs, lock them in place, attach the composite pitching housing with two quick-attach knobs, connect the ball feeder, and plug it in. Most first-time users are set up and pitching within ten to fifteen minutes. When practice wraps, the machine breaks down just as quickly and stores flat in a garage, shed, or trunk.\u003c\/p\u003e \u003cp\u003eThe pitching housing itself is high-impact composite plastic, which keeps the total machine weight at roughly 20 pounds. That is light enough for one person, including a teenager, to carry from a garage to a backyard setup spot without help. The fully enclosed wheel is a meaningful safety feature on a machine used by kids. Open-wheel machines can be intimidating or genuinely dangerous if a ball jams or a hand gets too close. BaseHit's housing surrounds the wheel on all sides, and a built-in safety breaker protects the electrical components from overload.\u003c\/p\u003e \u003ch2\u003ePower Options That Keep You Training\u003c\/h2\u003e \u003cp\u003eThe BaseHit plugs into any standard 110V A\/C outlet using the included power cord. For most backyard setups that means running an extension cord from the house or garage. If you want to train away from power, Heater Sports sells an optional portable power station that powers the machine for hours on a single charge. That opens up practice at fields, parks, or tournament warm-up areas where outlets are not available. The power pack is sold separately and is worth considering if you plan to haul the machine to team practices or baseball clinics.\u003c\/p\u003e \u003ch2\u003eWho the Heater BaseHit Is For\u003c\/h2\u003e \u003cp\u003eThe BaseHit makes sense for a specific audience. It fits baseball players between roughly five years old and adult recreational players who want efficient solo practice at home. That covers t-ball graduates starting to track moving pitches, coach pitch leaguers transitioning to machine pitch, Little Leaguers in the 8U to 12U range working on swing mechanics, and high school players looking for an at-home option for off-season reps. The top-end 45 MPH speed is below what most high school varsity pitchers throw, so a 16 year old will use this machine for timing work rather than facing game-speed heat. Parents of younger players often find the BaseHit covers multiple seasons as their child develops. The adjustable speed means the same machine that tossed slow pitches to a six year old still challenges them at ten or twelve.\u003c\/p\u003e \u003cp\u003eThe BaseHit also works for baseball coaches running small-group practices, travel teams looking for a backup machine, and youth baseball academies that need a durable, easy-to-move unit for introductory hitting stations. Where it does not fit is serious high school or college programs that need to train against mid-80s fastballs, sharp curveballs, or precise location work. Those programs should look at the Heater Pro line or heavier commercial machines.\u003c\/p\u003e \u003ch2\u003eTraining Drills for the BaseHit\u003c\/h2\u003e \u003cp\u003eA machine is only as useful as the drills you run with it. A few that work especially well with the BaseHit:\u003c\/p\u003e \u003cp\u003eStandard BP sessions. Set the machine at a comfortable starting speed, set the height for a normal fastball, and take three rounds of ten swings each. Work specific zones on each round: round one inside, round two middle, round three outside. The consistency of the machine lets the hitter focus purely on swing path.\u003c\/p\u003e \u003cp\u003eTwo-strike hitting. Raise the speed toward the top end, shorten the stride, and focus on putting the ball in play rather than driving it. This drill uses the BaseHit's top speed productively even for younger hitters because the goal is contact, not power.\u003c\/p\u003e \u003cp\u003eGround ball and pop fly rotations. Set up two or three infielders at normal defensive distance, tilt the machine down for grounders, and run a set. Reset the height knob for pop flies and move the fielders to shallow outfield positions. This is where the adjustable height pays off compared to a fixed-angle machine.\u003c\/p\u003e \u003cp\u003eSituational hitting. Call a situation before each pitch (runner on second, two outs; bases loaded, one out) and have the hitter execute accordingly. The BaseHit's predictable delivery keeps the focus on the situation rather than the pitch.\u003c\/p\u003e \u003ch2\u003eUsing the BaseHit With a Batting Cage\u003c\/h2\u003e \u003cp\u003eThe BaseHit has a built-in harness that attaches to Heater Sports home batting cages, including the Power Alley 22-foot cage and the Xtender 24-foot cage. The harness secures the back of the machine to a fixed point on the cage frame, which keeps it from shifting during use and guarantees the baseballs feed through the hitting tunnel rather than off to the side. If you already own one of those cages, or are considering a combo setup, the integration is seamless. For users without a cage, a 10 by 10 foot open area with a backstop or sturdy net behind the hitter works fine in a backyard. Just account for the ball flight: a hard-hit line drive off the top-end speed will travel.\u003c\/p\u003e \u003ch2\u003eLite Baseball Safety Note\u003c\/h2\u003e \u003cp\u003eHeater Sports issues a specific usage note on lite-baseballs with the BaseHit: lite-baseballs are intended for ground ball drills only, not for pop flies or fly ball practice. Lite-balls do not handle the trajectory from an angled-up machine well and can lead to inconsistent pitching or machine wear. Stick to real baseballs for pop fly drills and reserve lite-baseballs for grounder work and general hitting where ground-level pitch trajectory is the goal.\u003c\/p\u003e \u003ch2\u003eHeater BaseHit Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: BH199 (includes 12-ball automatic feeder)\u003c\/li\u003e \u003cli\u003ePitch speed with real baseballs: up to 45 MPH\u003c\/li\u003e \u003cli\u003ePitch speed with lite-baseballs: up to 60 MPH\u003c\/li\u003e \u003cli\u003eBall compatibility: regulation baseballs and lite-baseballs\u003c\/li\u003e \u003cli\u003ePitch types: fastballs, pop flies, ground balls (adjustable height)\u003c\/li\u003e \u003cli\u003eBall feeder: 12-ball automatic feeder, pitches every 10 seconds\u003c\/li\u003e \u003cli\u003eWheel: 6-inch enclosed wheel with dual-bearing electric motor\u003c\/li\u003e \u003cli\u003eFrame: tubular steel tripod stand with pushpin legs\u003c\/li\u003e \u003cli\u003eHousing: high-impact composite with built-in safety breaker\u003c\/li\u003e \u003cli\u003ePower: standard 110V A\/C or optional portable power station (sold separately)\u003c\/li\u003e \u003cli\u003eWeight: 20 pounds\u003c\/li\u003e \u003cli\u003ePacked dimensions: 14 x 12.5 x 18.75 inches\u003c\/li\u003e \u003cli\u003eRecommended ages: 5 years to adult\u003c\/li\u003e \u003cli\u003eBatting cage compatibility: built-in harness for Heater Sports Power Alley and Xtender cages\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eEvery BaseHit ships with the pitching machine housing, the automatic 12-ball feeder, one polyurethane pitching machine baseball for accuracy testing on first use, the tubular steel tripod stand with three pushpin legs, the A\/C power cord, and a printed setup and safety manual. A full supply of pitching machine baseballs is sold separately. Heater Sports offers both polyurethane machine balls and leather-covered machine balls, and either work well. The portable power station and batting cages referenced above are also sold separately.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eCan the BaseHit throw curveballs?\u003c\/h3\u003e \u003cp\u003eNo. The BaseHit uses a single-wheel design, which is optimal for consistent fastballs but does not have the dual-wheel mechanism required to put true rotation on a curveball. If you want a machine that throws curveballs, look at the Heater Crusher Curve (mini lite-balls) or the Heater Pro Curve (real baseballs).\u003c\/p\u003e \u003ch3\u003eWhat is the difference between the BaseHit and the Heater Jr.?\u003c\/h3\u003e \u003cp\u003eBoth machines are single-wheel, real-ball machines from Heater Sports. The Heater Jr. runs at higher top speeds and is built for older players ready for mid-40 to high-50 MPH pitching, while the BaseHit caps at 45 MPH and is sized for a broader youth age range starting at five. The BaseHit is the lighter, more portable option; the Heater Jr. is the step-up machine.\u003c\/p\u003e \u003ch3\u003eHow much room do I need to set it up?\u003c\/h3\u003e \u003cp\u003eA pitching distance of roughly 25 to 40 feet from machine to hitter is typical, plus space behind the hitter for a net or backstop and overhead clearance if you are hitting line drives. A 10 foot by 50 foot run in a backyard accommodates most family setups. Indoor use works in a gym or large basement, but expect the machine to pitch at its lower speed range in tighter quarters for safety.\u003c\/p\u003e \u003ch3\u003eDoes it work with any baseball, or do I need specific pitching machine balls?\u003c\/h3\u003e \u003cp\u003eThe BaseHit is designed for pitching machine baseballs rather than game-use regulation balls. Standard leather game balls can be used but will wear down faster and can scuff the wheel. Heater's polyurethane machine baseballs last significantly longer and are the recommended ball for the BaseHit. Lite-baseballs also work and are the safer choice for tight indoor or garage setups.\u003c\/p\u003e \u003ch3\u003eHow long does the auto-feeder take to cycle 12 balls?\u003c\/h3\u003e \u003cp\u003eAt the standard ten-second pitch interval, a full 12-ball feeder empties in roughly two minutes. Most users keep a bucket of additional baseballs near the feeder and refill it between at-bats or hitting rounds.\u003c\/p\u003e \u003ch3\u003eIs assembly difficult?\u003c\/h3\u003e \u003cp\u003eNo. Assembly is quick and tool-free. The three legs snap into the tripod with pushpins, the pitching housing mounts with two quick-attach knobs, and the ball feeder clips on top. First-time setup takes ten to fifteen minutes including reading the manual. Subsequent setups take two or three minutes.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333998969147,"sku":"T04-BH199","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-basehit-fastball-variable-speed-real-baseball-pitching-machine-7-with-auto-ball-feeder.jpg?v=1781230422"},{"product_id":"big-play-7-x-8-hitting-pitching-sports-net","title":"Big Play 7' x 8' Hitting \u0026 Pitching Sports Net","description":"\u003cp\u003eThe Heater® Sports Big Play 7' x 8' Hitting \u0026amp; Pitching Sports Net eliminates the need for constant ball retrieval so players can get more swings in at practice or before the game. This \"Fast Net\" is portable, lightweight, and easy to setup and take down; but it can also handle hard hits and fast pitches. The fiberglass frame and bungee cord net attachments make this all-purpose hitting net flexible yet durable.\u003c\/p\u003e \u003cp\u003eFeatures:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIdeal for use with Mini Lite-Balls™, Lite-Balls™, baseballs or softballs\u003c\/li\u003e \u003cli\u003e6-inch metal ground stakes\u003c\/li\u003e \u003cli\u003eSets up in minutes\u003c\/li\u003e \u003cli\u003eUltra-durable fiberglass frame for maximum strength and flexibility\u003c\/li\u003e \u003cli\u003eTough 1\" polypropylene netting\u003c\/li\u003e \u003cli\u003eSuitable for ages 6 and up\u003c\/li\u003e \u003cli\u003eDimensions: 7' height x 8' width\u003c\/li\u003e \u003cli\u003eAlso great for golf practice\u003c\/li\u003e \u003c\/ul\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333999001915,"sku":"T04-BP4999","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/big-play-7-x-8-hitting-pitching-sports-net-3-kingkongnet.jpg?v=1781230422"},{"product_id":"heater-crusher-curve-mini-lite-ball-pitching-machine","title":"Heater Sports Crusher Curve Mini Lite-Ball Pitching Machine","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Crusher Curve is a small-ball pitching machine that throws fastballs and curveballs using mini lite-balls, which are roughly two-thirds the size of a regulation baseball. The idea is deceptively simple: force a hitter to track and hit a ball the size of a golf ball, and by the time they step in against a real baseball, the regulation pitch looks slow and easy. Built around a dual-wheel pitching mechanism and a two-dozen automatic feeder, the Crusher Curve is a focused hand-eye coordination and pitch-recognition trainer for baseball players from about eight years old through adult.\u003c\/p\u003e \u003ch2\u003eWhy Train With Mini Lite-Balls\u003c\/h2\u003e \u003cp\u003eElite hitters train their eyes as aggressively as their swings. Small-ball training is a long-established technique for sharpening pitch recognition, tracking, and contact precision. When a hitter consistently makes contact with a ball the size of a large marble or golf ball moving at 40 MPH, the neural habit of picking up spin, reading trajectory, and driving the barrel to the ball transfers directly to regulation baseball pitches. What feels like a normal fastball after a session with the Crusher often feels slow and obvious. Professional and college programs have used variations of small-ball training for decades. The Crusher Curve brings that same concept to a home-use price point.\u003c\/p\u003e \u003cp\u003eMini lite-balls also solve a practical problem: space. A full-sized pitching machine firing real baseballs needs a batting cage, a big backyard, or a gym with a net. Mini lite-balls are soft and travel shorter distances, so the Crusher works in a garage, basement, driveway, or smaller backyard without worrying about broken windows or dented siding. The confined training space is its own benefit; many hitters find short-throw work easier to focus on because there is less visual distraction than a full hitting tunnel.\u003c\/p\u003e \u003ch2\u003eDual Wheel Means Real Curveballs\u003c\/h2\u003e \u003cp\u003eThe Crusher Curve uses a dual-wheel pitching mechanism, which is the key hardware difference between this machine and Heater's single-wheel units. With two independently controlled wheels, the machine can impart real rotation on the ball rather than just pushing it forward. Set both wheel speeds equal and the machine throws a straight fastball. Speed one wheel up and slow the other down, and the mini ball leaves the machine with curveball rotation, breaking sideways or downward as it travels.\u003c\/p\u003e \u003cp\u003eThat is the same principle commercial three-wheel machines use to throw sliders, changeups, and curves. On a mini-ball scale it is surprisingly effective because the small ball size exaggerates the visible break. A hitter sees a clearly curving pitch and has to adjust swing path and timing accordingly. For pitch recognition training, curveball work with the Crusher is its standout feature.\u003c\/p\u003e \u003ch2\u003eVariable Speed Up to 40 MPH\u003c\/h2\u003e \u003cp\u003eBoth wheels feature variable speed control, with a top end of approximately 40 MPH measured at 25 feet from the machine. That number matters for two reasons. First, 40 MPH of mini-ball velocity produces perceived pitch speeds well above 40 MPH because the smaller ball and shorter distance compress the reaction window. Hitters routinely describe the Crusher as feeling like mid-60s or higher real-baseball pitching in terms of reaction time. Second, the variable speed dials let you back off for younger hitters. A seven or eight year old just starting small-ball work will benefit from a slower setting that lets them build confidence before moving to the top end.\u003c\/p\u003e \u003ch2\u003eTwo-Dozen Ball Feeder With Adjustable Timing\u003c\/h2\u003e \u003cp\u003eThe Crusher's automatic feeder holds 24 mini lite-balls and drops them into the machine at a user-controlled pace. A timing knob adjusts the interval between pitches from about three seconds to about twenty seconds. That range is more useful than it sounds. Three seconds is aggressive rapid-fire training for reaction time and swing recovery. Twenty seconds gives a hitter time to step out, reset, and approach each pitch deliberately. Most coaches settle somewhere in the middle for general BP, closer to eight or nine seconds, which matches a typical real-game pace between pitches.\u003c\/p\u003e \u003cp\u003eA full 24-ball load empties in anywhere from 75 seconds at the fastest setting to eight minutes at the slowest. Refilling is fast because the feeder is open-topped.\u003c\/p\u003e \u003ch2\u003eAdjustable Height for Different Pitch Types\u003c\/h2\u003e \u003cp\u003eThe Crusher Curve's pitching housing adjusts up and down on the steel leg frame. Point it level for normal strike-zone work, angle it slightly up for high pitches or fly-ball hitting, or tilt it down for low strikes and ground ball practice. Combined with the dual-wheel curveball adjustment and the speed dial, the height setting lets you build a practice session that mixes pitch locations and pitch types, which is closer to what a real at-bat looks like than a single-pitch machine can offer.\u003c\/p\u003e \u003ch2\u003eSafety and Indoor Use\u003c\/h2\u003e \u003cp\u003eThe wheels are fully enclosed in the composite housing. That is essential on a machine used by kids at close range, because open wheels pose a real pinch hazard when you are loading balls. Combined with the soft mini lite-balls (which are foam or soft polyurethane and cannot break windows or seriously injure someone at Crusher speeds), the machine is safe for indoor use. Garage setups and basement training stations are both practical. Ricochet off the bat can still sting if it hits you, and good practice is to always use a protective screen or net behind the hitter, but the property-damage risk that rules out real-baseball machines indoors is largely gone with the Crusher.\u003c\/p\u003e \u003ch2\u003ePower: Plug or Battery\u003c\/h2\u003e \u003cp\u003eThe Crusher Curve runs on standard 110V A\/C power using the included cord. Heater Sports also offers optional rechargeable batteries (4-hour and 8-hour packs) that replace the A\/C cord for portable use. With a battery pack, the machine travels to a park, a field, or a tournament warm-up area where power is not available. The base Crusher Curve unit (model CR99) ships with the A\/C cord and a battery compartment ready for the optional battery pack. If you expect to use the machine away from outlets, budget for the battery separately.\u003c\/p\u003e \u003ch2\u003eWho the Crusher Curve Is For\u003c\/h2\u003e \u003cp\u003eThe Crusher Curve fits a more specific audience than a general-purpose pitching machine. It is best for baseball players ages eight through adult who already have basic swing mechanics down and want a training tool for pitch recognition, curveball tracking, and hand-eye sharpening. Little Leaguers in the 9U to 13U age range get the biggest developmental jump, because that is where pitch recognition becomes the limiting factor in their hitting. High school players use the Crusher for warm-up work and for sharpening eyes before games. College players and adult recreational players sometimes use it in the off-season for the same reasons.\u003c\/p\u003e \u003cp\u003eThe Crusher Curve is less useful for very young players still learning to track a ball at all (a slower, larger-ball machine like the Heater BaseHit is a better starting point) and for players who already get high-quality curveball work from a live pitcher or commercial three-wheel machine. It is also not a batting cage substitute; it is a supplement to cage work, a focused hand-eye coordination drill, and a way to put in baseball reps without tying up a field.\u003c\/p\u003e \u003ch2\u003eTraining Drills for the Crusher Curve\u003c\/h2\u003e \u003cp\u003eA few drills that make the most of the Crusher's dual-wheel capability:\u003c\/p\u003e \u003cp\u003eFastball-only tracking. Set both wheels equal and run a 24-ball round at moderate speed. Focus on contact, not power. This is the baseline drill that teaches the hitter to track the mini-ball size.\u003c\/p\u003e \u003cp\u003eCurveball recognition. Set the wheels for a clear curveball break and run a 24-ball round at moderate speed. The goal is not to hit every pitch hard; it is to correctly identify the pitch as a curve and either take it or adjust the swing. Miss rate is high early, and that is fine.\u003c\/p\u003e \u003cp\u003eMixed pitch sessions. Alternate fastball and curveball rounds with a short reset in between to flip wheel settings. Track which pitch type the hitter identifies correctly. This drill builds in-game pitch recognition faster than either pitch alone.\u003c\/p\u003e \u003cp\u003eTiming ladder. Start at the slowest feeder interval (about twenty seconds) and work down toward the fastest (about three seconds) over a single round. Each pitch comes faster than the last, which trains swing recovery and mental reset under time pressure.\u003c\/p\u003e \u003cp\u003eRapid-fire fastballs. Set the feeder to its fastest interval and top the speed dial out. This is a reaction-time drill that intentionally overloads the hitter so that game-speed real baseball pitches feel comfortable by comparison.\u003c\/p\u003e \u003ch2\u003eHeater Crusher Curve Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: CR99\u003c\/li\u003e \u003cli\u003ePitching speed: up to 40 MPH at 25 feet\u003c\/li\u003e \u003cli\u003ePitch types: fastballs and curveballs (dual-wheel mechanism)\u003c\/li\u003e \u003cli\u003eBall type: mini lite-balls, approximately two-thirds smaller than a regulation baseball\u003c\/li\u003e \u003cli\u003eBall feeder: 24-ball automatic feeder with adjustable pitch interval from about 3 to 20 seconds\u003c\/li\u003e \u003cli\u003eWheels: dual-wheel with variable speed controls, fully enclosed for safety\u003c\/li\u003e \u003cli\u003eFrame: tubular steel legs with rubber tips\u003c\/li\u003e \u003cli\u003ePitch height: adjustable\u003c\/li\u003e \u003cli\u003ePower: standard 110V A\/C (cord included) or optional rechargeable battery pack, 4-hour or 8-hour, sold separately\u003c\/li\u003e \u003cli\u003eWeight: 10.6 pounds\u003c\/li\u003e \u003cli\u003ePacked dimensions: 10.5 x 9 x 18.75 inches\u003c\/li\u003e \u003cli\u003eRecommended ages: 8 years to adult\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eThe Crusher Curve ships with the pitching machine, a built-in 24-ball automatic feeder, one dozen Crusher mini lite-balls to get started, the A\/C power cord, the battery compartment ready for an optional battery pack, and tubular steel legs with rubber tips. Additional mini lite-balls are sold separately in packs (Heater's standard mini poly-balls and slow mini-lite balls are both compatible). The rechargeable battery packs and any expansion accessories like batting cages are also sold separately. No baseballs are included because the machine is designed exclusively for mini lite-balls, not regulation baseballs.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eWill this machine throw real baseballs?\u003c\/h3\u003e \u003cp\u003eNo. The Crusher Curve is built specifically for mini lite-balls (golf-ball-sized soft training balls). Feeding it a regulation baseball would damage the machine. If you want a Heater Sports machine that throws real baseballs, look at the BaseHit (fastballs only) or the Pro Curve (real-ball dual-wheel machine).\u003c\/p\u003e \u003ch3\u003eHow realistic is the curveball?\u003c\/h3\u003e \u003cp\u003eSurprisingly realistic in terms of visible break and in terms of training value for pitch recognition. The ball is smaller than a real baseball, so the physics is not identical to a pro curveball, but the dual-wheel spin produces clear lateral and vertical break that a hitter has to read. For its price point, the Crusher Curve delivers the most accessible home curveball training available.\u003c\/p\u003e \u003ch3\u003eCan I use it in my garage?\u003c\/h3\u003e \u003cp\u003eYes, with reasonable precautions. The mini lite-balls are soft and unlikely to cause damage at Crusher speeds. Set the machine at one end of the garage, hitter at the other, and use a backstop or piece of carpet to catch balls that get past the hitter. The enclosed wheels and light ball weight make garage use one of the Crusher's main use cases.\u003c\/p\u003e \u003ch3\u003eWhat age is this appropriate for?\u003c\/h3\u003e \u003cp\u003eHeater Sports recommends ages 8 to adult. Below 8, pitch recognition training with mini balls is usually beyond what the hitter needs and can be frustrating. Above 8, benefit varies by skill level; recreational youth players use it as a pitch recognition trainer, while older players use it for timing and warm-up work.\u003c\/p\u003e \u003ch3\u003eDoes the rechargeable battery pack come with it?\u003c\/h3\u003e \u003cp\u003eNo. The CR99 base unit includes only the A\/C power cord. Rechargeable battery packs (4-hour and 8-hour capacity) are sold separately. The machine has a battery compartment built in and ready for the optional pack. If you plan to use the Crusher away from electrical outlets, add the battery pack to your order.\u003c\/p\u003e \u003ch3\u003eHow many balls do I need to buy with the machine?\u003c\/h3\u003e \u003cp\u003eThe Crusher Curve ships with one dozen mini lite-balls. The feeder holds 24, so one additional dozen brings you to a full feeder load. Most users eventually build up to two or three dozen total, which lets them run longer sessions without stopping to collect balls. Heater sells both their fast mini poly-balls and slow mini-lite balls; both work with the machine, with the slow balls being a bit easier on the machine and on surrounding surfaces.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333999067451,"sku":"T04-CR99","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-crusher-curve-mini-lite-ball-pitching-machine-6.jpg?v=1781230422"},{"product_id":"heater-jr","title":"Heater Jr. Real Baseball Pitching Machine with 12-Ball Auto Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Jr. is a real-baseball pitching machine built around a 1\/4 horsepower motor, a 12-ball spiral auto feeder, and variable pitch speeds from 15 to 48 MPH. It sits in the lineup as the step-up machine from the entry-level BaseHit: more power, wider speed range, faster feeder cycle, and a heavier-duty steel tripod. At 23 pounds it is still light enough to move to the field in one trip, and at $269.99 it is meaningfully less expensive than metal-frame machines while delivering the same motor used in Heater's higher-end real-ball units.\u003c\/p\u003e \u003cp\u003eFor a youth baseball player ages 8 and up outgrowing a simpler machine, or for a parent who wants one machine to cover several seasons of development, the Heater Jr. is a practical middle ground. It throws real leather baseballs and lite-baseballs, angles up and down for fly balls and grounders, and plugs into any standard A\/C outlet. An optional portable power pack takes it off the grid for practice at fields without plugs.\u003c\/p\u003e \u003ch2\u003e1\/4 HP Motor, Serious Speed Range\u003c\/h2\u003e \u003cp\u003eThe 1\/4 horsepower motor is what separates the Heater Jr. from lighter-duty real-ball machines. It is the same motor Heater puts in its higher-end metal-framed machines, which means pitching consistency holds up through long practice sessions without heat-soak slowdown. Variable speed control lets the user dial pitching anywhere from 15 MPH (for a very young hitter getting used to tracking moving pitches) up to 48 MPH on real baseballs, or up to 62 MPH with lite-baseballs.\u003c\/p\u003e \u003cp\u003eThe 48 MPH top end on real baseballs is meaningful. It matches typical pitch speeds in 10U to 12U baseball and is fast enough to give a high school hitter useful timing work for warm-up. The wide speed range means the machine grows with the player. A kid who starts at 20 MPH at age eight can push the dial up to 35, then 42, then eventually the top end over several seasons without outgrowing the machine.\u003c\/p\u003e \u003ch2\u003e12-Ball Spiral Auto Feeder\u003c\/h2\u003e \u003cp\u003eThe included 12-ball spiral feeder drops a baseball into the pitching wheel every 10 seconds, giving a hitter two minutes of continuous batting practice per full load. The spiral design is reliable across different ball types (real baseballs, pitching machine baseballs, lite-baseballs) because the feeder uses gravity and a drop release rather than mechanical rotation to separate each ball. It rarely jams, and if it does, clearing is a matter of lifting the stack and resetting.\u003c\/p\u003e \u003cp\u003eBetween loads, a parent, coach, or sibling can reload in under 10 seconds, so a full hitting round of 30 or 40 swings comes together with minimal downtime. For solo practice, plan on a small bucket of balls next to the feeder for fast reloads between at-bats.\u003c\/p\u003e \u003ch2\u003eAdjustable Pitch Height for Hitting and Fielding\u003c\/h2\u003e \u003cp\u003eThe pitching housing tilts on the tripod head to aim level, up, or down. Level gives a normal strike zone pitch. Angled up produces pop flies for outfield practice. Angled down rolls out ground balls for infielders. For a youth team with limited field time, that versatility lets one machine run a hitting station and two fielding stations with a simple knob adjustment between rounds.\u003c\/p\u003e \u003cp\u003eA note from Heater on lite-baseballs: use lite-baseballs for ground ball training only. The lighter weight does not produce consistent pitch trajectory when the machine is angled up for pop flies, and repeated angled-up use with lite-balls can cause wear. For pop-fly practice, stick with real baseballs or pitching machine baseballs.\u003c\/p\u003e \u003ch2\u003eGalvanized Steel Tripod and Nylon-Fiberglass Housing\u003c\/h2\u003e \u003cp\u003eThe tripod is galvanized steel tubing with rubber tips on the legs. Galvanizing matters for a machine that lives outdoors or in a damp garage. It resists corrosion far better than painted steel and holds up for years in conditions that would rust an unprotected frame. The legs use a pushpin assembly, so setup is tool-free and takes about a minute once you have done it once.\u003c\/p\u003e \u003cp\u003eThe pitching housing is nylon-fiberglass composite. That combination is lightweight (keeping total machine weight at 23 pounds) but impact-resistant enough to handle line-drive rebounds off the hitter. The fully enclosed wheel is visible only through the ball exit, which keeps fingers away from moving parts during loading and is an important safety feature on a machine used by kids.\u003c\/p\u003e \u003ch2\u003ePower: A\/C or Portable Pack\u003c\/h2\u003e \u003cp\u003eThe Heater Jr. plugs into any standard 110V A\/C wall outlet using the included cord. For practice at fields or parks without electricity, Heater offers optional Hot Box portable power stations that power the machine for hours on a charge. The base unit ships with only the A\/C cord; the power pack is sold separately and is worth the budget if your primary practice spot is a field or park.\u003c\/p\u003e \u003ch2\u003eWho the Heater Jr. Is For\u003c\/h2\u003e \u003cp\u003eThe Heater Jr. fits a specific audience: baseball players roughly 8 to 14 years old who need real-baseball pitching at speeds above what a coach or parent can throw reliably, serious youth players who want the same motor used in commercial-grade machines without the commercial-grade price, and families who want one pitching machine that covers multiple seasons of a player's development. It also fits travel teams looking for a reliable backup or warm-up machine, and coaches running batting practice stations at clinics.\u003c\/p\u003e \u003cp\u003eIt is not the right machine for players under seven or eight, where the 15 MPH low end may still be too fast and the BaseHit's smaller footprint is a better starting point. It is also not the machine for advanced high school or college players who need curveball work or pitching above 50 MPH. The Heater Pro Curve with its pivot-head breaking-ball design is the step up from the Jr. for players ready to train against curves.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eA few drills that work especially well with the Heater Jr.:\u003c\/p\u003e \u003cp\u003eProgressive speed rounds. Start a hitter at 25 MPH for the first 10 swings to warm up, bump to 35 MPH for the next 10 to focus on contact quality, and finish at 42 to 45 MPH for 10 swings of competitive-speed work. The variable speed dial makes this easy without repositioning the machine.\u003c\/p\u003e \u003cp\u003eTwo-strike contact drills. Set the machine at the top end (45-48 MPH), shorten the stride, and focus on putting the ball in play. The faster delivery shortens reaction time and trains a two-strike mindset.\u003c\/p\u003e \u003cp\u003eFielding rotations. Angle the housing down for 10 minutes of grounders, then up for 10 minutes of pop flies. Rotate two or three fielders through each. This use case makes the single-machine purchase much more versatile than a hitting-only setup.\u003c\/p\u003e \u003cp\u003eTiming work for older players. A high school player warming up before a game can use the Heater Jr. at 45-48 MPH for 15 or 20 swings to calibrate timing. It is not game speed, but the consistency of the machine helps isolate timing from pitch variability.\u003c\/p\u003e \u003ch2\u003eUsing the Heater Jr. With a Batting Cage\u003c\/h2\u003e \u003cp\u003eThe machine is designed to work with a Heater Sports home batting cage. The Power Alley 22 foot and Xtender 24-72 foot cages are sized for real-ball work and pair well with the Jr. Both cages have pitching machine openings that line up with the Jr.'s housing, so the machine sits outside the cage and pitches in through the opening. This keeps the hitter in the protected space and gives the machine a clear line of sight to the hitting zone.\u003c\/p\u003e \u003cp\u003eFor backyard use without a cage, leave at least 25 feet of pitching distance and have a heavy backstop net or fence behind the hitter. Real baseballs at 48 MPH travel a long way off a solid hit, and you do not want to be replacing windows or siding.\u003c\/p\u003e \u003ch2\u003eHeater Jr. Pitching Machine Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: HTR299 (includes 12-ball automatic feeder)\u003c\/li\u003e \u003cli\u003eMotor: 1\/4 horsepower electric motor\u003c\/li\u003e \u003cli\u003ePitch speed, real baseballs: 15 to 48 MPH variable\u003c\/li\u003e \u003cli\u003ePitch speed, lite-baseballs: up to 62 MPH\u003c\/li\u003e \u003cli\u003eBall compatibility: real baseballs (polyurethane pitching machine balls recommended), real leather baseballs, lite-baseballs\u003c\/li\u003e \u003cli\u003ePitch types: fastballs, pop flies, ground balls (adjustable pitching height)\u003c\/li\u003e \u003cli\u003eBall feeder: 12-ball spiral automatic feeder, pitches every 10 seconds\u003c\/li\u003e \u003cli\u003eHousing: nylon-fiberglass composite with fully enclosed pitching wheel\u003c\/li\u003e \u003cli\u003eTripod: galvanized steel with rubber-tipped legs, pushpin assembly\u003c\/li\u003e \u003cli\u003ePower: standard 110V A\/C (cord included) or optional Hot Box portable power pack (sold separately)\u003c\/li\u003e \u003cli\u003eWeight: 23 pounds\u003c\/li\u003e \u003cli\u003eRecommended ages: 8 years to adult\u003c\/li\u003e \u003cli\u003eCompatible cages: Heater Sports Power Alley 22', Xtender 24-72'\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eThe Heater Jr. package includes the pitching machine housing, the 12-ball spiral automatic feeder, one polyurethane pitching machine baseball (for accuracy testing and initial use), the galvanized steel tripod stand with rubber-tipped legs, the A\/C power cord, and the printed instruction manual. Pitching machine baseballs are sold separately; a dozen or two is a reasonable starting supply. The optional Hot Box portable power pack, the Heater Sports Power Alley or Xtender batting cages, and ball shaggers like the Ball Vacuum are separate purchases.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eWhat is the difference between the Heater Jr. and the BaseHit?\u003c\/h3\u003e \u003cp\u003eBoth are single-wheel real-baseball machines. The Heater Jr. uses a 1\/4 HP motor (the same motor used in Heater's higher-end metal machines) and covers 15 to 48 MPH on real baseballs. The BaseHit uses a smaller motor and tops out at 45 MPH with a narrower speed range. The Heater Jr. is designed for older youth players ready for more power and a wider speed range; the BaseHit is the entry-level option for younger players starting from 5 or 6 years old. The Heater Jr. is also heavier-duty with its galvanized steel tripod.\u003c\/p\u003e \u003ch3\u003eDoes the Heater Jr. throw curveballs?\u003c\/h3\u003e \u003cp\u003eNo. The Jr. is a single-wheel machine, which is optimal for consistent fastballs, grounders, and pop flies but cannot impart the rotation needed for a true curveball. If curveball training is a priority, look at the Heater Pro Curve (HTR499BB), which uses a pivot-head design to throw breaking balls.\u003c\/p\u003e \u003ch3\u003eHow long does it take to set up?\u003c\/h3\u003e \u003cp\u003eFirst-time setup takes about 10 to 15 minutes including reading the manual. After that, the tripod legs pushpin-lock into place and the machine housing mounts with quick-attach knobs, so repeat setups take two to three minutes.\u003c\/p\u003e \u003ch3\u003eWhat kind of baseballs should I use?\u003c\/h3\u003e \u003cp\u003eHeater recommends their polyurethane pitching machine baseballs for consistent accuracy and long wheel life. Real leather baseballs with low-profile seams work fine but accuracy can vary slightly from ball to ball based on seam differences. Synthetic leather balls are not recommended because they can scuff the wheel and do not pitch well when wet. Lite-baseballs work for ground ball training but should not be used for pop-fly drills.\u003c\/p\u003e \u003ch3\u003eCan I use it indoors?\u003c\/h3\u003e \u003cp\u003eYes, with space. You need roughly 25 feet of pitching distance plus 10 or 15 feet behind the hitter for a backstop. Most home basements are too short. A large garage, gym, or commercial facility with a net setup works. For indoor use, stick with pitching machine balls or lite-baseballs rather than leather balls to minimize damage risk to surroundings.\u003c\/p\u003e \u003ch3\u003eHow long does the motor last?\u003c\/h3\u003e \u003cp\u003eWith normal home use, the 1\/4 HP motor is rated for thousands of hours of operation. The motor is the same component Heater uses in machines aimed at commercial and team use, so heavy family or team use is within design spec. Keep the machine dry (never leave it in rain) and store it indoors between sessions to maximize motor life.\u003c\/p\u003e \u003ch3\u003eDoes it work with a batting cage?\u003c\/h3\u003e \u003cp\u003eYes. The Heater Jr. has a built-in machine harness that attaches to Heater Sports home batting cages. The Power Alley 22 foot and Xtender 24-72 foot cages both have pitching machine openings sized for the Jr. For backyard use without a cage, a sturdy backstop net is essential because real baseballs at 48 MPH travel far off the bat.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333999132987,"sku":"T04-HTR299","price":249.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-jr-7-heblcu.jpg?v=1781230422"},{"product_id":"heater-pro-curve","title":"Heater Pro Curve Real Baseball Pitching Machine with Pivot Head and Auto Ball Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Pro Curve is a single-wheel real-baseball pitching machine with a pivot-head design that throws inside and outside breaking balls in addition to fastballs. It runs at variable speeds up to 52 MPH with real baseballs (up to 80 MPH with lite-baseballs), ships with a bonus 12-ball automatic feeder, and uses the same 1\/4 horsepower motor as Heater's other premium machines. At 53 pounds it is the heaviest-duty single-wheel machine in the Heater lineup, aimed at serious youth and high school players who want curveball training without the price or weight of a commercial three-wheel machine.\u003c\/p\u003e \u003cp\u003eAt $549.99, the Pro Curve sits at the top of Heater's home-use line. For context: it offers real-baseball curveball training in a single-wheel package, a category that most competitors address only with multi-wheel designs priced well above $1,000. The tradeoff is that the pivot-head design approximates breaking-ball rotation rather than producing the precise spin profile of a three-wheel commercial machine. For home batting practice and pitch recognition training, the approximation is close enough to be training-effective.\u003c\/p\u003e \u003ch2\u003eThe Pivot-Head Design Explained\u003c\/h2\u003e \u003cp\u003eWhat makes the Pro Curve different from every other real-baseball machine in Heater's lineup is the pivot-head design. The entire pitching housing tilts side-to-side on a vertical axis, not just up-and-down for height adjustment. That lateral tilt changes the angle at which the ball leaves the wheel, which in turn changes the direction and break of the pitch.\u003c\/p\u003e \u003cp\u003ePoint the pivot-head straight and the machine throws a fastball. Tilt it to one side and the ball leaves the wheel with a sideways component to its spin, which produces a curveball breaking in that direction as it travels to the hitter. Tilt the other way and you get a curveball breaking the opposite direction. Combined with the height adjustment (up-down tilt for pop flies and grounders), the Pro Curve can throw a surprisingly complete pitch variety for a single-wheel machine: fastballs at any height, inside breaking balls, outside breaking balls, pop flies, and grounders.\u003c\/p\u003e \u003cp\u003eThe break is genuine and hitters have to read it. It is not the three-wheel commercial-machine precision, but for home and team practice it teaches pitch recognition in a way a straight fastball machine cannot. Hitters who train regularly against the Pro Curve get noticeably better at identifying spin and tracking breaking balls, which transfers directly to live at-bats.\u003c\/p\u003e \u003ch2\u003eVariable Speed: 52 MPH Real \/ 80 MPH Lite\u003c\/h2\u003e \u003cp\u003ePitch speed tops out at 52 MPH with real baseballs and 80 MPH with lite-baseballs. The variable speed dial covers the full range, so a younger hitter training on the same machine can dial back to 30 or 35 MPH for comfortable contact work, then push up as they develop. The 80 MPH lite-ball top end is worth understanding: lite-baseballs at 80 MPH do not feel like a real baseball at 80 MPH because the lighter ball decelerates faster and produces a different perceived pitch speed. But 80 MPH of lite-ball velocity is fast enough to challenge high school hitters on reaction time and timing, particularly when combined with the curveball break.\u003c\/p\u003e \u003cp\u003eHeater rates the Pro Curve for ages 8 to adult. For an 8 year old, the meaningful use is dialing the speed way down (30 MPH range) and using the height adjustment without the curveball break. The machine grows with the player: a 10 year old moves up to 35-40 MPH, a 13 year old gets to 45-48 MPH, and a high school hitter uses the top end for timing work and the curveball adjustment for pitch recognition.\u003c\/p\u003e \u003ch2\u003e12-Ball Bonus Auto-Feeder\u003c\/h2\u003e \u003cp\u003eThe bonus auto-ball feeder included with the Pro Curve holds 12 real baseballs and drops one into the pitching wheel every 10 seconds. That is two minutes of continuous batting practice per full feeder load. The feeder attaches to the top of the machine housing and is easy to remove for storage or manual feeding during instruction sessions where a coach wants to pace pitches differently.\u003c\/p\u003e \u003cp\u003eBetween feeder loads, reloading is fast and can be done while the hitter takes a short break. For a solo practice session, keep a bucket of balls next to the feeder and plan on reloading every two minutes. For team practices, a coach or assistant can manage the feeder while the hitter focuses on swings.\u003c\/p\u003e \u003ch2\u003eHeavy-Duty 8-Inch Air-Filled Wheel\u003c\/h2\u003e \u003cp\u003eThe Pro Curve uses an 8-inch air-filled pitching wheel, which is larger than the wheels on Heater's lighter-duty machines. Larger wheel diameter means more surface contact with the ball at release, which translates to more consistent pitches and longer wheel life. The air-filled design cushions the ball on release, which both extends ball life and keeps pitch speed consistent as wheel wear accumulates over thousands of cycles. The wheel is fully enclosed in the composite housing for safety, with only the ball exit opening visible.\u003c\/p\u003e \u003ch2\u003eSteel Frame and 1\/4 HP Motor\u003c\/h2\u003e \u003cp\u003eAt 53 pounds, the Pro Curve is the heaviest machine in the Heater lineup designed for home use. That weight comes from the steel frame and the heavier 1\/4 HP motor (same horsepower rating as the Heater Jr., but built into a larger chassis). The weight is an advantage for pitching consistency: a heavier machine is more stable under recoil from each pitch, which keeps the ball trajectory tighter shot after shot. It is a minor disadvantage for portability, but two adults or one strong adult can move it without trouble.\u003c\/p\u003e \u003cp\u003eTubular steel legs with rubber tips anchor the machine on any surface without sliding during use. The rubber tips also protect gym floors or finished surfaces from scratching, which matters if you run the Pro Curve indoors.\u003c\/p\u003e \u003ch2\u003ePower: A\/C Only (or Optional Portable Pack)\u003c\/h2\u003e \u003cp\u003eThe Pro Curve plugs into any standard 110V A\/C wall outlet. Heater offers optional Hot Box portable power stations (600 peak and 1200 peak) that take the machine off the grid for field and park practice. The base unit includes only the A\/C cord. If your primary use case involves taking the machine to fields, budget for a Hot Box 600 or 1200, the 1200 gives longer run time and better safety headroom for the Pro Curve's heavier motor draw.\u003c\/p\u003e \u003ch2\u003eWho the Heater Pro Curve Is For\u003c\/h2\u003e \u003cp\u003eThe Pro Curve fits serious youth and high school baseball players who want curveball training at home without the price of a commercial machine. It fits travel teams and high school programs that need a real-baseball curve-capable machine for multi-player practice rotations. It fits adult recreational players working on timing and pitch recognition against breaking balls. And it fits baseball coaches running clinics where a single versatile machine has to cover multiple training scenarios.\u003c\/p\u003e \u003cp\u003eIt is a considered purchase for families at $549.99. The machines below it in Heater's lineup (the Heater Jr. at $269.99, the BaseHit at $199.99) cover fastball work for youth players at meaningfully lower cost. The Pro Curve's value proposition is specifically the curveball training and the higher top-end speed. If your player is mostly working on contact at 30-45 MPH fastballs, the Heater Jr. is the more economical choice. If they are working on pitch recognition and need to see breaking balls in practice, the Pro Curve is the right tool.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eA few drills that make the most of the Pro Curve's pivot-head capability:\u003c\/p\u003e \u003cp\u003eFastball-only rounds. Keep the pivot-head centered and run 10-15 pitches at moderate speed. This establishes timing and lets the hitter focus on swing mechanics without pitch recognition load.\u003c\/p\u003e \u003cp\u003eCurveball rounds. Tilt the pivot-head to one side and run 10-15 curveballs. The goal is not to crush every pitch; it is to identify the curve, read the break, and adjust swing path. Miss rate is higher, and that is the point, pitch recognition training requires practice against real breaking movement.\u003c\/p\u003e \u003cp\u003eMixed pitch sequences. Alternate between fastball (centered) and curveball (tilted) rounds, resetting the pivot-head between each pitch or every few pitches. This is the closest approximation to a real at-bat the Pro Curve can produce and is the most valuable drill for game-transfer.\u003c\/p\u003e \u003cp\u003eSpeed ladder work. Start at 35 MPH, work up 3 MPH per round until you hit the top of a hitter's comfortable timing. Then stay at that speed for 10 swings to cement the new timing. The fine-grained variable speed control makes this drill precise.\u003c\/p\u003e \u003cp\u003eFielding rotations. Use the up-down height adjustment (separate from the pivot-head side tilt) to angle the machine down for grounders and up for pop flies. Run two or three fielders through each.\u003c\/p\u003e \u003ch2\u003eUsing the Pro Curve With a Batting Cage\u003c\/h2\u003e \u003cp\u003eThe Pro Curve is designed to work with Heater Sports home batting cages. The Power Alley 22 foot cage fits typical backyard spaces and is the most common pairing. The Xtender 24 foot (extendable to 72 feet) is the longer option for larger yards, facility use, or situations where you want a full tunnel-length cage. Both cages have pitching machine openings that accept the Pro Curve's housing, so the machine sits outside the cage and pitches in through the opening.\u003c\/p\u003e \u003cp\u003eFor backyard use without a cage, plan for at least 30 feet of pitching distance and a heavy backstop net behind the hitter. A Pro Curve throwing a line-drive curveball at 50 MPH produces contact that carries a long way off the bat, and you want significant protection behind the hitting zone.\u003c\/p\u003e \u003ch2\u003eHeater Pro Curve Pitching Machine Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: HTR499BB (includes 12-ball bonus automatic feeder)\u003c\/li\u003e \u003cli\u003eMotor: 1\/4 horsepower electric motor\u003c\/li\u003e \u003cli\u003ePitch speed, real baseballs: up to 52 MPH variable\u003c\/li\u003e \u003cli\u003ePitch speed, lite-baseballs: up to 80 MPH\u003c\/li\u003e \u003cli\u003ePitch types: fastballs, curveballs (inside and outside breaking balls), pop flies, grounders\u003c\/li\u003e \u003cli\u003ePitch mechanism: single-wheel with patented pivot-head design for breaking balls\u003c\/li\u003e \u003cli\u003eWheel: 8-inch air-filled, fully enclosed\u003c\/li\u003e \u003cli\u003eBall compatibility: real baseballs (polyurethane pitching machine balls recommended), real leather baseballs, lite-baseballs\u003c\/li\u003e \u003cli\u003eBall feeder: 12-ball bonus automatic feeder, pitches every 10 seconds\u003c\/li\u003e \u003cli\u003eFrame: tubular steel legs with rubber tips\u003c\/li\u003e \u003cli\u003ePower: standard 110V A\/C (cord included) or optional Hot Box 600\/1200 portable power pack (sold separately)\u003c\/li\u003e \u003cli\u003eWeight: 53 pounds\u003c\/li\u003e \u003cli\u003eRecommended ages: 8 years to adult\u003c\/li\u003e \u003cli\u003eCompatible cages: Heater Sports Power Alley 22', Xtender 24-72'\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eThe Pro Curve ships with the pitching machine housing, the 12-ball bonus automatic feeder, the tubular steel tripod frame with rubber-tipped legs, the A\/C power cord, and the printed instruction manual. Heater's polyurethane pitching machine baseballs are sold separately and are the recommended ball for the Pro Curve, plan on at least a dozen or two for meaningful practice sessions. The optional Hot Box portable power pack, a Heater Sports batting cage (Power Alley 22' or Xtender 24-72'), a machine cover, and ball shaggers are sold separately. Real leather baseballs work with the machine but wear faster; Heater machine balls are the economical long-term choice for regular use.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eHow realistic are the curveballs?\u003c\/h3\u003e \u003cp\u003eThe pivot-head design produces a real, visible curveball break. It is not the precision of a three-wheel commercial machine, where each wheel can be individually adjusted to produce specific spin profiles. But for pitch recognition training, the Pro Curve's break is unmistakably a curveball and hitters have to read and adjust to it. For home batting practice and high school team use, the training value is real.\u003c\/p\u003e \u003ch3\u003eWhat is the difference between the Pro Curve and the Heater Jr.?\u003c\/h3\u003e \u003cp\u003eThe Heater Jr. (HTR299) is a single-wheel fastball machine at $269.99 covering 15-48 MPH on real baseballs. The Pro Curve (HTR499BB) adds the pivot-head design for curveballs, bumps the top speed to 52 MPH real \/ 80 MPH lite, uses an 8-inch wheel instead of 6-inch, and weighs 53 lbs vs 23 lbs. The Jr. is the fastball trainer; the Pro Curve is the complete-pitch-variety trainer.\u003c\/p\u003e \u003ch3\u003eCan my 8 year old use the Pro Curve?\u003c\/h3\u003e \u003cp\u003eYes, with the speed dialed down. At 30 MPH with the pivot-head centered (no curve), the Pro Curve is age-appropriate for a developing 8 year old. The more advanced features (curveball work, higher speeds) become relevant as the player develops. It is a machine that can cover many years of player growth, which is part of its value proposition at this price point.\u003c\/p\u003e \u003ch3\u003eIs it hard to switch between fastball and curveball settings?\u003c\/h3\u003e \u003cp\u003eNo. The pivot-head rotates on its mount with a quick knob adjustment. Most users can switch between fastball-centered, curve-left, curve-right, and back in a few seconds. That makes mid-round pitch variation practical during a single at-bat.\u003c\/p\u003e \u003ch3\u003eWhat kind of baseballs should I use?\u003c\/h3\u003e \u003cp\u003eHeater recommends their polyurethane pitching machine baseballs for the Pro Curve. These are purpose-built for pitching machine use: consistent weight, smooth seams, and a wheel-friendly surface. Real leather baseballs work but wear faster against the air-filled wheel. Synthetic leather is not recommended. Lite-baseballs work and are safer for indoor or backyard use where real balls would risk property damage.\u003c\/p\u003e \u003ch3\u003eHow much space do I need?\u003c\/h3\u003e \u003cp\u003ePlan for at least 30 feet of pitching distance and 10-15 feet of clear space behind the hitter for a backstop. A full setup including cage typically takes a 12 foot by 35-40 foot footprint in a backyard. Indoor use requires a high school or commercial facility gym, most home basements and garages are too short for meaningful Pro Curve sessions.\u003c\/p\u003e \u003ch3\u003eDoes it work with a Heater batting cage?\u003c\/h3\u003e \u003cp\u003eYes. The Pro Curve is designed to pair with the Heater Sports Power Alley 22 foot and Xtender 24-72 foot batting cages. Both cages have pitching machine openings sized for the Pro Curve housing. For full setups, budget for the cage separately, the Power Alley runs about $200 and the Xtender 24 foot runs about $300.\u003c\/p\u003e \u003ch3\u003eCan I run it off batteries or a generator?\u003c\/h3\u003e \u003cp\u003eThe Pro Curve is designed for 110V A\/C power. Heater's optional Hot Box 600 and Hot Box 1200 portable power stations are designed specifically for their machines. A standard quiet generator that provides clean 110V A\/C will work, but the heavier motor draw means a smaller generator or inverter may trip under load. If you plan regular off-grid use, the Hot Box 1200 is the safer choice.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333999329595,"sku":"T04-HTR499BB","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-pro-curve-9-hedecu.jpg?v=1781230422"},{"product_id":"heater-pitching-machine","title":"Heater Sports Real Baseball Pitching Machine with 12-Ball Auto Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Sports Real Baseball Pitching Machine is a single-wheel fastball machine built around a 1\/4 horsepower motor with variable speed control up to 52 MPH. It ships with a free 12-ball automatic feeder, uses a tubular steel frame with rubber-tipped legs, and weighs 47 pounds. Model HTR6000BBC. At $449.99 it is the middle-tier real-ball machine in the Heater lineup: more capable than the $269 Heater Jr. and the $199 BaseHit, but without the pivot-head curveball feature of the $549 Pro Curve. For anyone who wants a serious fastball-focused machine with fielding-drill capability and does not need curveball training, the Real Baseball machine is the cost-effective choice.\u003c\/p\u003e \u003cp\u003eWhat this machine does especially well is versatility between hitting and fielding work. The variable speed range and tilt-adjustable housing make it easy to run a hitting station, then flip to pop-fly drills for outfielders, then tilt again for infield grounder work, all with the same machine and a simple knob adjustment between rounds.\u003c\/p\u003e \u003ch2\u003e1\/4 Horsepower Motor for Consistent Pitching\u003c\/h2\u003e \u003cp\u003eThe 1\/4 HP electric motor is the same component Heater uses in the Heater Jr. and Pro Curve. For a fastball machine, motor consistency is what separates a machine that throws the same pitch every time from one that drifts as it heats up. The 1\/4 HP rating is enough for continuous use through a full team batting practice without performance degradation, and the motor is rated for the high operational duty cycles a serious home or team user puts it through.\u003c\/p\u003e \u003cp\u003eVariable speed control covers the full range up to 52 MPH on real baseballs. For younger hitters, dial down to 30-35 MPH for comfortable contact work. For middle school players, 40-45 MPH gives game-speed timing practice. High school hitters use the top end for warm-up and fast-paced reaction training. The wide range means the machine grows with a developing player over multiple seasons.\u003c\/p\u003e \u003ch2\u003eTilt-Adjustable for Three-in-One Training\u003c\/h2\u003e \u003cp\u003eA standout feature for a fastball-only machine is the tilt adjustment on the pitching housing. Angle it level for a normal strike-zone fastball. Tilt it down and the machine rolls out ground balls for infield fielding practice. Tilt it up and it throws pop flies for outfield drills. This three-in-one capability is especially valuable for team practices where field time is limited and one machine has to support multiple drill stations.\u003c\/p\u003e \u003cp\u003eA typical team session with the Real Baseball machine: 20 minutes of batting practice with the machine at level pitch, 15 minutes of outfield pop-fly work with the tilt angled up, and 15 minutes of infield grounder work with the tilt angled down. That covers the three primary defensive positions on one machine without bringing out separate training equipment.\u003c\/p\u003e \u003ch2\u003e12-Ball Automatic Feeder Included Free\u003c\/h2\u003e \u003cp\u003eThe bonus 12-ball automatic feeder attaches to the top of the machine and drops a baseball into the wheel every 10 seconds, giving two minutes of continuous pitching per full load. The feeder is included at no additional cost, separately, the machine and feeder would cost more, so this is effectively a bundled package that represents meaningful value versus buying components separately.\u003c\/p\u003e \u003cp\u003eFor team batting practice, the auto-feeder means the coach or assistant running the station doesn't need to hand-feed each pitch. One coach can manage the machine while focusing on instruction with the hitter. For solo practice at home, the feeder enables proper batting practice without needing a second person.\u003c\/p\u003e \u003ch2\u003eTubular Steel Frame, 47-Pound Build\u003c\/h2\u003e \u003cp\u003eThe frame is tubular steel with rubber-tipped legs for floor protection and anti-slip stability. At 47 pounds total, the Real Baseball machine is meaningfully heavier than the 23-pound Heater Jr. but lighter than the 53-pound Pro Curve. The added weight improves pitching consistency because the machine stays planted during the small recoil from each pitch, lighter machines can shift or vibrate on softer surfaces and affect ball trajectory over time.\u003c\/p\u003e \u003cp\u003eThe fully enclosed wheel keeps fingers away from moving parts and is a genuine safety feature for team use where multiple players may handle the machine. The steel frame is designed for long-term durability, and with reasonable care (indoor storage, keeping it dry) a Real Baseball machine will last through many seasons of regular use.\u003c\/p\u003e \u003ch2\u003ePower: A\/C Wall Outlet, Battery Pack, or Generator\u003c\/h2\u003e \u003cp\u003eThe machine plugs into any standard 110V A\/C wall outlet with the included power cord. It also works with battery packs and generators that provide stable 110V A\/C output. That flexibility matters for team use at fields without dedicated power, a quiet generator or a Heater Hot Box portable power station takes the machine to any practice location. The Hot Box 600 handles typical single-hitter batting practice sessions; the Hot Box 1200 gives more capacity for longer team sessions.\u003c\/p\u003e \u003ch2\u003eWho the Heater Sports Real Baseball Machine Is For\u003c\/h2\u003e \u003cp\u003eThis machine fits a specific middle ground: serious home users and teams who want a real-baseball machine with full fielding-drill capability but do not need curveball training. That includes families with a youth baseball player (ages 8+) who want one machine for multiple seasons of development, travel baseball teams wanting a reliable team-practice machine without spending $1,500+ on a commercial unit, high school programs looking for a cost-effective batting practice and fielding machine, and baseball clinics needing a durable, predictable machine for rotating station work.\u003c\/p\u003e \u003cp\u003eIf curveball training is a priority, the Pro Curve (HTR499BB) is the step up. If you are training younger players (ages 5-10) or your primary need is a compact machine that fits backyard space tight, the Heater Jr. or BaseHit are lighter and more economical. The Real Baseball machine is the choice when you want real-ball fastball work plus fielding drills and the heavier-duty build is worth the price over the Jr.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eA few drills that make the most of the Real Baseball machine's versatility:\u003c\/p\u003e \u003cp\u003eStandard team batting practice. Machine at level pitch, 40-48 MPH depending on age, 10 swings per hitter. The auto-feeder and consistent delivery make this more efficient than hand-thrown BP.\u003c\/p\u003e \u003cp\u003eTwo-strike hitting. Top speed (50-52 MPH), shortened stride, focus on contact. The higher speed trains two-strike reaction.\u003c\/p\u003e \u003cp\u003eOutfield pop-fly rotation. Tilt the machine up, station two to three outfielders, and run 8-10 fly balls per rotation. Rotate defensive positions (corner OF, center OF, gap coverage) to simulate game fly-ball variety.\u003c\/p\u003e \u003cp\u003eInfield grounder drills. Tilt the machine down, station infielders, and run 10-15 grounders per rotation. The consistency of the machine is a coaching asset, a kid who can't handle machine-fed grounders at 40 MPH is not ready for real game speeds either.\u003c\/p\u003e \u003cp\u003eCombination sessions. Hitting, then fielding, then hitting again. The tilt adjustment takes 30 seconds between modes, so mixed sessions are practical and match real game rhythm where players see both at-bats and defensive plays.\u003c\/p\u003e \u003ch2\u003eUsing the Machine With a Batting Cage\u003c\/h2\u003e \u003cp\u003eThe Real Baseball machine pairs naturally with Heater Sports home batting cages. The Power Alley 22 foot cage is the common choice for typical backyard spaces. The Xtender 24-72 foot cage covers larger setups including facility or team use. Both cages have pitching machine openings sized for the machine housing. For backyard use without a cage, allow at least 25 feet of pitching distance and a heavy backstop net behind the hitter, real baseballs at 52 MPH travel a long way off the bat.\u003c\/p\u003e \u003ch2\u003eHeater Sports Real Baseball Pitching Machine Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: HTR6000BBC (includes 12-ball automatic feeder)\u003c\/li\u003e \u003cli\u003eMotor: 1\/4 horsepower electric motor\u003c\/li\u003e \u003cli\u003ePitch speed: up to 52 MPH variable speed with real baseballs\u003c\/li\u003e \u003cli\u003ePitch types: fastballs, pop flies, ground balls (tilt-adjustable housing)\u003c\/li\u003e \u003cli\u003eBall compatibility: real baseballs, pitching machine baseballs, lite-baseballs\u003c\/li\u003e \u003cli\u003eBall feeder: 12-ball automatic feeder, pitches every 10 seconds (included)\u003c\/li\u003e \u003cli\u003eWheel: fully enclosed pitching wheel\u003c\/li\u003e \u003cli\u003eFrame: tubular steel legs with rubber tips\u003c\/li\u003e \u003cli\u003ePower: standard 110V A\/C (cord included), also works with battery packs and generators; optional Hot Box portable power pack sold separately\u003c\/li\u003e \u003cli\u003eWeight: 47 pounds\u003c\/li\u003e \u003cli\u003eRecommended ages: 8 years to adult\u003c\/li\u003e \u003cli\u003eCompatible cages: Heater Sports Power Alley 22', Xtender 24-72'\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eThe Heater Real Baseball Pitching Machine ships with the pitching machine housing, the 12-ball automatic ball feeder, the tubular steel tripod frame with rubber-tipped legs, the A\/C power cord, and the printed instruction manual. Pitching machine baseballs are sold separately, Heater's polyurethane machine balls are the recommended ball for wheel longevity and pitch consistency. Leather pitching machine baseballs are also available for users who prefer the feel and sound of leather. Ball shaggers, batting cages, machine covers, and portable power packs are sold separately.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eDoes this machine throw curveballs?\u003c\/h3\u003e \u003cp\u003eNo. The Real Baseball machine is a single-wheel design optimized for consistent fastballs with grounder and pop-fly adjustments. For curveball training, the Heater Pro Curve (HTR499BB) adds a pivot-head mechanism that throws breaking balls.\u003c\/p\u003e \u003ch3\u003eWhat's the difference between this and the Heater Jr.?\u003c\/h3\u003e \u003cp\u003eBoth use the same 1\/4 HP motor. The Real Baseball (HTR6000BBC) is heavier-duty: 47 lbs vs 23 lbs, a more robust tubular steel frame, and a modestly higher top speed (52 MPH vs 48 MPH). The Jr. is lighter and more portable for family use; the Real Baseball machine is built for team or serious home use where the machine stays in one location most of the time.\u003c\/p\u003e \u003ch3\u003eWhat's the difference between this and the softball version?\u003c\/h3\u003e \u003cp\u003eThe HTR6000SB is the softball version of the same platform, rated for 12-inch softballs at up to 50 MPH. Both machines share the same frame, motor, and tilt-adjustment features. The difference is calibration for ball size and weight, the softball machine cannot throw baseballs accurately, and this machine cannot throw regulation softballs. Pick the one that matches your sport.\u003c\/p\u003e \u003ch3\u003eHow portable is a 47-pound machine?\u003c\/h3\u003e \u003cp\u003eOne adult can move the Real Baseball machine without much trouble over short distances (car to practice spot, garage to backyard). For longer carries or stairs, two people make it easier. The machine is not designed for frequent long-distance transport, if you need a truly portable real-baseball machine, the 23-pound Heater Jr. is the better choice for that use case.\u003c\/p\u003e \u003ch3\u003eCan I use it indoors?\u003c\/h3\u003e \u003cp\u003eYes, with appropriate space. Plan for at least 25 feet of pitching distance and 10-15 feet of clearance behind the hitter for a backstop. Most home garages and basements are too short. A gym or commercial facility with proper space works well. For indoor use, pitching machine balls or lite-baseballs are safer than leather balls to minimize damage risk.\u003c\/p\u003e \u003ch3\u003eWhat kind of baseballs should I use?\u003c\/h3\u003e \u003cp\u003eHeater recommends their polyurethane pitching machine baseballs for the best combination of wheel longevity, pitch consistency, and ball durability. These balls are purpose-built for machine use. Real leather baseballs work but wear faster and can scuff the wheel. Lite-baseballs work for reduced-speed practice and indoor use.\u003c\/p\u003e \u003ch3\u003eDoes it need to be used with a batting cage?\u003c\/h3\u003e \u003cp\u003eNot strictly, but strongly recommended. Real baseballs hit off a 52 MPH pitch travel far. A backstop net or a full cage keeps the practice area contained and makes ball retrieval practical. The Heater Sports Power Alley 22 foot or Xtender 24 foot cages are sized to work with the Real Baseball machine.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333999362363,"sku":"T04-HTR6000BBC","price":449.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-pitching-machine-5.jpg?v=1781230422"},{"product_id":"power-alley-batting-cage-22x12x8","title":"Heater Sports Power Alley 22 Ft. Backyard Batting Cage for Baseball and Softball","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Sports Power Alley is a 22-foot backyard batting cage designed for real baseballs and softballs. It covers a 22 by 12 by 8 foot footprint, which fits in most mid-sized backyards and gives enough length for a hitter to drive the ball before it catches the back net. The frame uses lightweight fiberglass poles, the net is 1-inch polyethylene, and six steel ground stakes plus nylon support ropes anchor the cage against wind and ball impact. At $199.99, it is the most affordable real-ball backyard cage in the Heater Sports lineup.\u003c\/p\u003e \u003cp\u003eWhat makes this cage work at its price point is the built-in pitching machine harness. Every Heater Sports real-baseball machine (Heater Jr., Pro Curve, Real Baseball) connects to the cage through a dedicated harness opening, which means the machine sits outside the cage and pitches in. That keeps the machine in a protected position and the hitter in a protected position, and makes the setup plug-and-play for anyone already using Heater pitching machines.\u003c\/p\u003e \u003ch2\u003eReal-Ball Cage, Not a Lite-Ball Cage\u003c\/h2\u003e \u003cp\u003eThe important distinction: the Power Alley is built for real baseballs and softballs. The 1-inch polyethylene netting and fiberglass frame are sized and rated for the impact of a real ball hit at machine-pitch speeds. This is different from the Heater Home Run 12-foot cage, which is specifically a lite-ball cage and should not be used with real baseballs.\u003c\/p\u003e \u003cp\u003eFor a family or team using the Heater Jr., Pro Curve, or Real Baseball pitching machines at typical youth and high school speeds, the Power Alley is the cage sized for that use. It handles line drives from a 12 year old hitter taking 40 MPH fastballs without stressing the net or frame. It handles a high school player swinging at 50 MPH pitches from the Pro Curve. What it is not built for is extended use from adult power hitters swinging at commercial-machine speeds, at that point, a facility-grade cage is the right tool.\u003c\/p\u003e \u003ch2\u003eFiberglass Frame With Steel Ground Stakes\u003c\/h2\u003e \u003cp\u003eThe frame uses solid fiberglass poles. Fiberglass is a deliberate choice over thin-walled steel for a backyard cage. It flexes under impact and wind rather than bending or creasing, which means the frame recovers its shape after taking a hit from a line drive. Steel ground stakes anchor the base (six total), and nylon support ropes add tension to keep the frame stable under load.\u003c\/p\u003e \u003cp\u003eSetup is tool-free and takes about 20-30 minutes for first-time solo assembly, or 10-15 minutes with a helper. The poles fit together with connectors, the net slides over the frame, and the stakes drive into the ground through loops at the base. Takedown reverses the process in similar time. The whole cage packs into a storage bag that fits in a closet or garage corner between seasons.\u003c\/p\u003e \u003ch2\u003eBuilt-in Pitching Machine Harness\u003c\/h2\u003e \u003cp\u003eOne end of the cage has a built-in harness opening sized for Heater Sports pitching machines. The harness allows the machine to sit just outside the cage and pitch through the opening into the hitting zone. That design has two practical benefits: the machine stays in a protected position outside the line of hit baseballs, and the cage uses its full interior length for hitting rather than dedicating space to the machine.\u003c\/p\u003e \u003cp\u003eAny Heater Sports real-baseball machine works with the Power Alley harness: Heater Jr. (HTR299), Pro Curve (HTR499BB), and the Heater Real Baseball Machine (HTR6000BBC). The harness is not sized for commercial three-wheel machines or competitor-brand machines.\u003c\/p\u003e \u003ch2\u003eBaseball or Softball Ready\u003c\/h2\u003e \u003cp\u003eThe Power Alley is dual-use for both baseball and softball. The 1-inch polyethylene netting and fiberglass frame handle real baseballs and regulation softballs equally well. For a family with both a baseball player and a softball player, or a multi-sport household, one cage covers both use cases. For softball use, pair with the Heater 12 Inch Softball Pitching Machine (HTR6000SB); for baseball, pair with any of the Heater real-baseball machines.\u003c\/p\u003e \u003ch2\u003eSizing: 22 Feet Long, 12 Feet Wide, 8 Feet High\u003c\/h2\u003e \u003cp\u003eThe 22 by 12 by 8 foot dimensions are specifically sized for backyard use. The 22-foot length is enough to give a hitter visual feedback on ball flight, see a hit travel 15-18 feet before it catches the back net, which tells you something about contact quality. Shorter cages compress that feedback and make it harder to read hits. The 12-foot width accommodates a full swing with clearance on both sides for bat path. The 8-foot height works for average-height hitters and for typical line-drive and low-pop trajectories, though the Power Alley's 8-foot ceiling means very high pop flies may contact the top net earlier than in a 10-foot-high cage.\u003c\/p\u003e \u003cp\u003eFor setups that need more length (team facility use, extended tunnel practice), the Xtender 24-72 foot cage is the sibling product that can be extended in sections. The Power Alley is the fixed backyard size.\u003c\/p\u003e \u003ch2\u003eWho the Heater Power Alley Is For\u003c\/h2\u003e \u003cp\u003eThe Power Alley fits families with a serious youth or high school baseball or softball player who want a dedicated real-ball practice cage in their backyard. It fits households that already own or plan to own a Heater Sports pitching machine, the harness integration makes the cage and machine function as one system. It also fits coaches wanting a portable cage for small-group or clinic use, and travel teams looking for a practice setup that can be moved between locations.\u003c\/p\u003e \u003cp\u003eFor lite-ball-only users (households using a Crusher Curve or Slider lite-ball machine), the smaller and less expensive Home Run 12-foot cage is the right choice. For extended-length requirements, look at the Xtender. For anyone in the middle, real baseballs or softballs, backyard space, machine already in use, the Power Alley is the purpose-built option.\u003c\/p\u003e \u003ch2\u003eHeater Power Alley Batting Cage Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: PA199\u003c\/li\u003e \u003cli\u003eDimensions: 22 feet long x 12 feet wide x 8 feet high\u003c\/li\u003e \u003cli\u003eFrame: solid fiberglass poles\u003c\/li\u003e \u003cli\u003eNetting: 1-inch polyethylene\u003c\/li\u003e \u003cli\u003eAnchors: steel ground stakes with nylon support ropes\u003c\/li\u003e \u003cli\u003eMachine harness: built-in, sized for Heater Sports pitching machines\u003c\/li\u003e \u003cli\u003eBall compatibility: real baseballs, real softballs (baseball or softball use)\u003c\/li\u003e \u003cli\u003eRecommended ages: 6 years to adult\u003c\/li\u003e \u003cli\u003eUse: outdoor backyard, primarily\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eThe Power Alley package includes the fiberglass frame assembly, the 1-inch polyethylene net, six steel ground stakes, nylon support ropes, the built-in pitching machine harness, and printed assembly instructions. No pitching machine and no baseballs or softballs are included. Plan on a Heater Sports pitching machine and balls as separate purchases for a complete setup.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eCan I use this cage without a pitching machine?\u003c\/h3\u003e \u003cp\u003eYes. The cage works fine for tee work, soft toss, front toss, and coach-pitch practice. The harness is designed for a machine but the cage does not require one. For families without a pitching machine, the Power Alley still offers a contained practice space for basic hitting work.\u003c\/p\u003e \u003ch3\u003eCan I use real baseballs in this cage?\u003c\/h3\u003e \u003cp\u003eYes. Unlike the Home Run 12-foot cage (lite-ball only), the Power Alley is designed for real baseballs and real softballs at typical youth and high school machine speeds.\u003c\/p\u003e \u003ch3\u003eWhat pitching machines are compatible?\u003c\/h3\u003e \u003cp\u003eAll Heater Sports real-baseball pitching machines work with the Power Alley harness: Heater Jr. (HTR299), Heater Pro Curve (HTR499BB), and Heater Sports Real Baseball Machine (HTR6000BBC). For softball, the Heater 12 Inch Softball Pitching Machine (HTR6000SB) also works. Commercial three-wheel machines and competitor-brand machines are generally not harness-compatible.\u003c\/p\u003e \u003ch3\u003eHow long does setup take?\u003c\/h3\u003e \u003cp\u003eFirst-time setup takes about 20-30 minutes working alone, or 10-15 minutes with a helper. After the first setup, repeat setups take about 10-15 minutes.\u003c\/p\u003e \u003ch3\u003eCan I leave it up all season?\u003c\/h3\u003e \u003cp\u003eYes, if the stakes are properly driven and support ropes are tensioned. The fiberglass frame and polyester-blend netting tolerate sun and rain well. For maximum cage life, take it down before extended severe weather (heavy snow, high wind storms) and for winter storage in cold climates.\u003c\/p\u003e \u003ch3\u003eHow does this compare to the Xtender cage?\u003c\/h3\u003e \u003cp\u003eThe Power Alley is a fixed 22-foot cage at $199.99. The Xtender is an extendable cage starting at 24 feet and extending to 72 feet in sections, at higher price points. For typical backyard use, the Power Alley is the right size and price. For facility or extended-length requirements, the Xtender line is the option.\u003c\/p\u003e \u003ch3\u003eIs replacement netting available?\u003c\/h3\u003e \u003cp\u003eYes. Replacement net panels are available from Heater Sports, sold separately. Contact the manufacturer for current part availability.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333999395131,"sku":"T04-PA199","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/power-alley-batting-cage-22x12x8-11.jpg?v=1781230423"},{"product_id":"heater-slider-variable-speed-lite-baseball-pitching-machine","title":"Heater Sports Slider Lite Curve Baseball Pitching Machine with Pivot Head and Auto Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Slider is a lite-ball pitching machine with a pivot-head design that throws both fastballs and curveballs using lite-baseballs. It ships with a 12-ball automatic feeder, a fully enclosed pitching wheel, and an adjustable pitching height. Model SL129BB. At $179.99, it is the affordable entry point into curveball training, meaningfully less expensive than the $549 Pro Curve real-baseball curveball machine, while delivering the same core pivot-head concept sized for lite-balls.\u003c\/p\u003e \u003cp\u003eThe tradeoff versus the Pro Curve is clear: the Slider is lite-ball-only. It cannot throw regulation baseballs. For a family that wants curveball training at home, particularly in tighter backyard spaces, garages, or basements where real baseballs would risk property damage, the Slider is the appropriate tool. For a program or player that specifically needs real-baseball curveballs, the Pro Curve is the step up.\u003c\/p\u003e \u003ch2\u003eThe Pivot-Head Design\u003c\/h2\u003e \u003cp\u003eThe Slider shares its pivot-head curveball mechanism with the Pro Curve. The entire pitching housing rotates on a vertical axis, which changes the angle at which the ball leaves the wheel and produces genuine breaking-ball rotation as the ball travels to the hitter. Point the head centered and the Slider throws a fastball. Tilt it to one side and the ball curves that direction. Tilt it the other way for an opposite-direction curve.\u003c\/p\u003e \u003cp\u003eThe physics of curveball generation on lite-baseballs is different from real baseballs, the lighter ball decelerates faster and the spin-to-translation ratio is higher, but the result is the same: a hitter sees a clearly breaking pitch and has to read and adjust to it. For pitch recognition training, that is the key training signal. Hitters who train against the Slider get better at identifying curveball spin and tracking breaking movement, and that skill transfers directly to real-baseball at-bats.\u003c\/p\u003e \u003ch2\u003eVariable Speed and Pitch Height\u003c\/h2\u003e \u003cp\u003eSpeed control is variable. Lite-balls leave the machine at speeds up to 60 MPH. The perceived pitch speed at the plate is meaningful because lite-balls travel a shorter effective distance before their velocity drops, so 60 MPH at the release feels faster in terms of reaction time than a real baseball at the same velocity. For reaction-time training on a compressed time window, the Slider delivers game-intense practice even in a backyard setting.\u003c\/p\u003e \u003cp\u003eThe pitching housing also adjusts up and down independently of the pivot-head side tilt. Angle it up for pop flies, level for strike-zone pitches, or down for ground balls. Combined with the curveball side-tilt, that gives a decent pitch variety for a single-wheel machine: level fastballs, level curveballs, high fastballs, low fastballs, grounders, and pop flies.\u003c\/p\u003e \u003ch2\u003e12-Ball Automatic Feeder\u003c\/h2\u003e \u003cp\u003eThe included 12-ball automatic feeder drops a lite-baseball into the wheel every 9 seconds. Slightly faster cycle than Heater's real-baseball machines (10 seconds), which keeps the pace of a batting practice session brisk. Two minutes of continuous pitching per full feeder load. Refilling between loads is quick, just lift the cap and drop the next dozen balls in. For a solo practice session, a small bucket of lite-balls near the feeder keeps the reloads fast.\u003c\/p\u003e \u003ch2\u003eBuilt for Tight Spaces\u003c\/h2\u003e \u003cp\u003eA practical advantage of the Slider that matters for many families: lite-baseballs don't damage property at Slider speeds. That makes the machine usable in garage setups, driveways, basement spaces, and tight backyards where a real-baseball machine would be a property-damage risk. The fully enclosed pitching wheel keeps hands away from moving parts during loading, and the soft lite-ball design means ricochets off the bat are low-consequence.\u003c\/p\u003e \u003cp\u003eFor indoor use, most home garages and full-size basements have enough length for meaningful Slider practice. Plan for 15-20 feet of pitching distance (which is less than the 25+ feet needed for real-baseball machines because lite-balls decelerate faster). A heavy towel or blanket draped behind the hitter catches balls that get past the swing, and the whole setup can be broken down and stored in minutes when practice ends.\u003c\/p\u003e \u003ch2\u003eWho the Heater Slider Is For\u003c\/h2\u003e \u003cp\u003eThe Slider fits youth baseball players (ages 8 and up) whose families want curveball training at home without the expense or space requirements of a real-baseball curveball machine. It fits households with tight backyard space or indoor-only practice areas where property damage risk rules out real-baseball machines. It fits families with multiple kids at different skill levels, the variable speed control means one machine serves a developing 8 year old and a skilled 13 year old without compromise. And it fits coaches running small-group curveball recognition clinics where setup flexibility matters.\u003c\/p\u003e \u003cp\u003eIt is not the right machine for players who specifically need real-baseball curveball work (look at the Pro Curve HTR499BB). It is also not the machine for youngest hitters (ages 5-7) who are still learning to track moving pitches, the Crusher Curve mini-ball machine is gentler for that starting point. In between those extremes, the Slider covers the \"I want curveball training on lite-balls at home\" use case better than any other option at its price point.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eDrills that make the most of the Slider:\u003c\/p\u003e \u003cp\u003eFastball-only rounds. Pivot-head centered, 10-12 swings at moderate speed. Baseline contact work.\u003c\/p\u003e \u003cp\u003eCurveball recognition. Pivot-head tilted to one side, 10-12 swings. Focus: identify the break, adjust swing path. Miss rate is naturally higher, and that is the training signal. The hitter gets better at reading breaking movement with practice.\u003c\/p\u003e \u003cp\u003eMixed pitch sequences. Alternate fastball-centered and curveball-tilted between pitches. This is closest to game-condition pitch recognition and is the highest-value drill for transfer to live at-bats.\u003c\/p\u003e \u003cp\u003eTiming ladders. Start at 30 MPH, work up 5 MPH per round until the hitter's timing breaks down. Hold at that threshold for 10 swings to cement the new timing ceiling.\u003c\/p\u003e \u003cp\u003eGarage warm-up. For a player warming up before a game or practice, 5 minutes of Slider work (mixed fastballs and curves) grooves timing and pitch recognition without needing to find a batting cage.\u003c\/p\u003e \u003ch2\u003eHeater Slider Pitching Machine Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: SL129BB (includes 12-ball automatic feeder)\u003c\/li\u003e \u003cli\u003ePitch speed: variable speed, up to 60 MPH with lite-baseballs\u003c\/li\u003e \u003cli\u003ePitch types: fastballs, curveballs (inside and outside breaking balls), pop flies, grounders\u003c\/li\u003e \u003cli\u003ePitch mechanism: single-wheel with pivot-head design for breaking balls\u003c\/li\u003e \u003cli\u003eBall compatibility: lite-baseballs only (cannot pitch regulation real baseballs)\u003c\/li\u003e \u003cli\u003eBall feeder: 12-ball automatic feeder, pitches every 9 seconds (included)\u003c\/li\u003e \u003cli\u003eWheel: fully enclosed pitching wheel\u003c\/li\u003e \u003cli\u003eFrame: tubular steel legs with rubber tips\u003c\/li\u003e \u003cli\u003ePower: standard 110V A\/C (cord included)\u003c\/li\u003e \u003cli\u003eRecommended ages: 8 years to adult\u003c\/li\u003e \u003cli\u003eSuitable for: indoor garage, basement, tight backyard, or outdoor use\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eThe Slider ships with the pitching machine housing, the 12-ball automatic feeder, the tubular steel tripod frame with rubber-tipped legs, the A\/C power cord, and the printed instruction manual. Lite-baseballs are sold separately, Heater Sports offers several lite-ball options. Plan for at least a dozen or two lite-balls for meaningful practice sessions.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eCan this machine throw real baseballs?\u003c\/h3\u003e \u003cp\u003eNo. The Slider is designed for lite-baseballs only. Feeding real baseballs would damage the pitching wheel. For real-baseball curveball training, the Heater Pro Curve (HTR499BB) is the real-ball equivalent at a higher price point.\u003c\/p\u003e \u003ch3\u003eHow is this different from the Crusher Curve?\u003c\/h3\u003e \u003cp\u003eThe Crusher Curve (CR99) uses mini lite-balls (golf-ball-sized) for small-ball hand-eye coordination training. The Slider uses full-size lite-baseballs for regulation-size pitch recognition training. Different ball sizes, different training goals. The Crusher is for younger hitters and small-ball eye-training; the Slider is for standard-size curveball practice.\u003c\/p\u003e \u003ch3\u003eHow realistic are the curveballs?\u003c\/h3\u003e \u003cp\u003eThe pivot-head design produces a genuine, visible curveball break. The physics differ from real baseballs because lite-balls are lighter, but for pitch recognition training purposes, the break is unmistakable and hitters must read and adjust. For home and youth practice, the training value is real.\u003c\/p\u003e \u003ch3\u003eCan I use it in my garage?\u003c\/h3\u003e \u003cp\u003eYes, and this is one of the Slider's primary use cases. Lite-baseballs at Slider speeds do not damage property. Plan for 15-20 feet of pitching distance (less than real-baseball machines need) and a backstop (heavy blanket, towel, or dedicated net) behind the hitter.\u003c\/p\u003e \u003ch3\u003eWhat age is it appropriate for?\u003c\/h3\u003e \u003cp\u003eHeater recommends ages 8 and up. The variable speed control means a comfortable starting point for a young hitter is around 25-30 MPH. As they develop, the machine scales up to the 60 MPH top end.\u003c\/p\u003e \u003ch3\u003eDoes it work in a batting cage?\u003c\/h3\u003e \u003cp\u003eYes. The Slider works in any cage sized for lite-ball use, including the Heater Home Run 12-foot cage. For real-ball cages (Power Alley, Xtender), the Slider still fits but is overkill, those cages are sized for real-ball machines.\u003c\/p\u003e \u003ch3\u003eWhat lite-baseballs should I use?\u003c\/h3\u003e \u003cp\u003eHeater Sports offers multiple lite-ball options including the Slider Lite leather machine balls and various PowerAlley lite-ball types (40 MPH orange, 60 MPH white, 80 MPH). Match the ball type to your speed target. For general Slider practice, the 60 MPH white lite-baseballs are a versatile default choice.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333999427899,"sku":"T04-SL129BB","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-slider-variable-speed-lite-baseball-pitching-machine-7-sports-curve-with-pivot-head-and-auto-feeder.jpg?v=1781230511"},{"product_id":"big-league-pro-soft-toss-machine","title":"Heater Big League Drop Toss Machine for Baseball and Softball Hitting Practice","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Big League is a drop toss trainer that lets a hitter work on swing mechanics and timing without a partner. It is not a pitching machine, it doesn't throw pitches at the hitter. Instead, it drops a baseball or softball straight down in front of the plate at programmable intervals, simulating a soft-toss drill where a coach or parent would normally feed balls by hand. For players who want to groove a swing on their own or parents who want their young player to get quality reps without the family being tied to batting practice duty, the Big League fills a specific and useful niche.\u003c\/p\u003e \u003cp\u003eAt $59.99, the Big League is not trying to be a pitching machine. It is trying to replace a tossing coach, and at that job it works well. The 12-ball spiral auto feeder drops a ball every 8 seconds through a metal toss extension, giving the hitter time to set up, swing, and reset between each drop. Power comes from a standard wall adapter (included), 4 C batteries (sold separately), or an optional 8-hour rechargeable battery (sold separately), which makes it usable at home, at a park, or at a field without outlets.\u003c\/p\u003e \u003ch2\u003eWhat Drop Toss Trains (And What It Doesn't)\u003c\/h2\u003e \u003cp\u003eDrop toss is a focused drill. Because the ball drops straight down at a predictable spot, the hitter can isolate specific swing mechanics: timing the drop, staying back on the ball, driving through contact, finishing the swing. What drop toss does not train is pitch recognition, the ball isn't coming at the hitter with velocity and spin, so there's no tracking component to the drill.\u003c\/p\u003e \u003cp\u003eUsed with that understanding, drop toss is valuable. It is the standard drill for grooving swing path, hand position at contact, and repetition volume. Professional and college hitters use drop toss and soft toss as core warm-up drills because the predictability lets them focus on one mechanical element at a time. The Big League delivers that same training capability at home.\u003c\/p\u003e \u003ch2\u003e12-Ball Spiral Auto Feeder\u003c\/h2\u003e \u003cp\u003eThe feeder holds 12 balls in a spiral arrangement and releases them one at a time through a metal toss extension. Each ball drops every 8 seconds, which is a pace that works for most hitters, fast enough to keep the drill moving, slow enough to reset between swings. A full feeder load gives about 90 seconds of continuous drill time before reloading.\u003c\/p\u003e \u003cp\u003eThe metal extension that guides the ball to its drop point is purposeful. Soft toss machines that just drop balls straight from the feeder can vary drop location by a few inches based on how the ball sits in the feeder, which undermines the consistency that makes drop toss valuable. The Big League's extension aligns each ball to drop in the same spot each time, so the hitter can predict and practice contact with consistent timing.\u003c\/p\u003e \u003ch2\u003eWorks with Real Balls or Lite Balls\u003c\/h2\u003e \u003cp\u003eThe Big League handles regulation baseballs and softballs as well as lite-baseballs. For backyard or indoor use, lite-balls are the safer choice because mishit balls travel less distance. For outdoor field or cage use, regulation balls give a more realistic contact feel and sound. A family can switch between ball types without adjusting the machine.\u003c\/p\u003e \u003ch2\u003eMultiple Power Options\u003c\/h2\u003e \u003cp\u003ePower flexibility is one of the Big League's practical strengths. The machine plugs into any standard wall outlet using the included power adapter, the default choice for home use. It also runs on 4 C batteries (sold separately) for basic portable use, or on the Heater Crusher 8-hour rechargeable battery (sold separately) for extended portable sessions. That battery compatibility means the Big League can travel to parks, fields, and practice areas without electrical outlets without users having to budget for a larger portable power station.\u003c\/p\u003e \u003ch2\u003eSturdy Tubular Steel Stand, Lightweight Design\u003c\/h2\u003e \u003cp\u003eThe stand is tubular steel, which keeps the unit stable during use. A wobbling drop toss machine would be frustrating because it would change the ball drop location. Combined with the lightweight design of the machine body, the Big League is stable when it needs to be and portable when it needs to move. One adult can pick it up and move it to a different practice spot without trouble.\u003c\/p\u003e \u003ch2\u003eHeater Big League Drop Toss Machine Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: ST49\u003c\/li\u003e \u003cli\u003eBall feeder: 12-ball spiral auto feeder, drops ball every 8 seconds\u003c\/li\u003e \u003cli\u003eDelivery: metal toss extension for consistent ball drop location\u003c\/li\u003e \u003cli\u003eBall compatibility: regulation baseballs, regulation softballs, lite-baseballs, lite-softballs\u003c\/li\u003e \u003cli\u003ePower: standard wall adapter (included); also works with 4 C batteries (not included) or Heater Crusher 8-hour rechargeable battery (sold separately)\u003c\/li\u003e \u003cli\u003eStand: tubular steel\u003c\/li\u003e \u003cli\u003eRecommended ages: 6 years to adult\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eThe Big League ships with the drop toss machine, the 12-ball spiral auto feeder, the tubular steel stand, the metal toss extension, the A\/C power adapter, and the printed instruction manual. No baseballs, softballs, or batteries are included. The Heater Crusher 8-hour rechargeable battery is sold separately if you want extended portable use.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eIs this a pitching machine?\u003c\/h3\u003e \u003cp\u003eNo. The Big League is a drop toss machine, it drops balls straight down for hitters to swing at, like a soft-toss drill. It does not throw pitches with velocity. For a pitching machine, look at the BaseHit, Heater Jr., or Pro Curve.\u003c\/p\u003e \u003ch3\u003eCan I use both baseballs and softballs?\u003c\/h3\u003e \u003cp\u003eYes. The machine handles regulation baseballs, regulation softballs, lite-baseballs, and lite-softballs. Switch ball types without any machine adjustment.\u003c\/p\u003e \u003ch3\u003eWhat kind of drills is this good for?\u003c\/h3\u003e \u003cp\u003eDrop toss is ideal for swing-path work, grooving mechanics, contact-point training, and repetition volume. It is not a pitch-recognition trainer because the ball drops rather than travels toward the hitter. For hitters working on mechanics or warming up, drop toss is a focused and efficient drill.\u003c\/p\u003e \u003ch3\u003eHow many swings per load?\u003c\/h3\u003e \u003cp\u003e12 balls at one drop every 8 seconds gives about 90 seconds of continuous drill time per load. Reloading is fast, drop the next dozen into the feeder and continue.\u003c\/p\u003e \u003ch3\u003eDo I need a batting cage?\u003c\/h3\u003e \u003cp\u003eNot strictly, but a net or backstop behind the hitter is recommended. Even soft-hit balls off drop toss can travel and cause property damage if there's nothing to catch them. A simple backstop net, garage door, or heavy tarp works. For backyard use, the Heater Home Run 12-foot cage is an affordable cage companion for lite-ball drop toss work.\u003c\/p\u003e \u003ch3\u003eWhat age is appropriate?\u003c\/h3\u003e \u003cp\u003eHeater recommends ages 6 and up. Drop toss is especially useful for younger hitters building basic swing mechanics because the predictable ball drop lets them focus on contact quality. Older hitters use it as warm-up and mechanics work.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333999558971,"sku":"T04-ST49","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/big-league-pro-soft-toss-machine-3-in-use.jpg?v=1781230511"},{"product_id":"home-batting-cage-12-x-12-x-24","title":"Heater Sports Xtender 24 Ft. Backyard Batting Cage with Extendable Frame","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Sports Xtender is a 24-foot extendable backyard batting cage designed for real baseballs and softballs. The 24-foot starting length works for typical backyards, and the same cage system can be extended in sections to 30, 36, 48, 54, 60, 66, or 72 feet for larger yards or facility use. The frame combines steel tubing side supports with flexible fiberglass arches, the net is 1-inch polyethylene, and foam padding protects the frame from ball impact at the stress points. Model XT299.\u003c\/p\u003e \u003cp\u003eWhat makes the Xtender work as a long-term investment is the extendability. Most backyard cages are fixed in length, when your player outgrows a 20-foot cage or your space changes, you buy a new cage. The Xtender's modular design lets you add sections to reach 72 feet in 6-foot increments, which means the same cage can grow from a starter backyard setup to a facility-length training tunnel over time. At $299.99 for the 24-foot starting configuration, it is priced in the middle of Heater's cage lineup.\u003c\/p\u003e \u003ch2\u003eHybrid Steel and Fiberglass Frame\u003c\/h2\u003e \u003cp\u003eThe Xtender frame design is deliberate: steel tubing for the vertical side supports that take the most structural load, and flexible fiberglass arches for the overhead span. Steel provides rigidity and stability, the cage doesn't sway or shift under pitching machine use or wind load. Fiberglass in the arches provides flex under ball impact and wind, so the overhead frame absorbs hits and returns to shape rather than bending or creasing like thin-walled steel would.\u003c\/p\u003e \u003cp\u003eEach frame support has a foam pad that covers the impact zones where balls are most likely to contact the frame. The padding extends cage life significantly, a direct hit from a 50 MPH line drive without padding concentrates stress on the frame. With padding, that same hit dissipates energy across a larger surface area and the frame is unaffected. The padding also reduces dangerous ricochets.\u003c\/p\u003e \u003ch2\u003eSix Steel Ground Stakes\u003c\/h2\u003e \u003cp\u003eSix powerful steel ground stakes anchor the cage base. Six is more than most backyard cages in this price range use, and the added anchor count matters for wind stability. Combined with nylon support ropes that tension the frame, the Xtender stays planted in typical backyard wind conditions and resists the small but real frame stress that comes from continuous pitching machine use.\u003c\/p\u003e \u003ch2\u003e1-Inch Polyethylene Net\u003c\/h2\u003e \u003cp\u003eThe netting is 1-inch polyethylene, the same weight class used in the Power Alley 22-foot cage. For a cage sized to handle real baseballs and softballs at typical youth and high school machine speeds, 1-inch mesh is standard spec. The net is sized and shaped to cover the full 24-foot frame with no gaps. For extended lengths (30-72 feet), additional net sections are sold with the frame extensions to keep the cage fully enclosed.\u003c\/p\u003e \u003ch2\u003eBuilt-in Pitching Machine Harness\u003c\/h2\u003e \u003cp\u003eThe Xtender has a built-in pitching machine harness compatible with Heater Sports machines. The harness lets any Heater real-baseball machine (Heater Jr., Pro Curve, Real Baseball) or the 12-inch softball machine connect to the cage at one end. The machine sits in a protected position outside the hitting zone and pitches through the opening to the hitter inside. Same design as the Power Alley, and notable because it means the Xtender and Power Alley are interchangeable from a machine-compatibility standpoint. Anyone upgrading from the Power Alley to the Xtender keeps the same machine setup.\u003c\/p\u003e \u003ch2\u003eBaseball or Softball Ready\u003c\/h2\u003e \u003cp\u003eThe Xtender is dual-use for baseball and softball. The 1-inch netting and reinforced frame handle both ball types equally well. For a household with players in both sports, or a facility serving both programs, one cage covers everything.\u003c\/p\u003e \u003ch2\u003eExtending Beyond 24 Feet\u003c\/h2\u003e \u003cp\u003eThe Xtender's modular design means the cage can be extended to 30, 36, 48, 54, 60, 66, or 72 feet by purchasing additional sections. Each extension is a self-contained section that connects to the existing frame with matched connectors. Pricing scales with length: 30' at $349, 36' at $399, up to the 72' option at $799.\u003c\/p\u003e \u003cp\u003eFor most home users, 24 feet is the right starting size and probably the final size. Extending becomes worthwhile for team facilities that want a proper batting tunnel, for baseball clinics running multiple hitters on a rotation, and for facilities where the extra length means balls travel further before catching the net, which gives hitters more meaningful visual feedback on hit quality. For regular backyard use, 24 feet is plenty.\u003c\/p\u003e \u003ch2\u003eSizing: 24 Feet Long, 12 Feet Wide, 10 Feet High\u003c\/h2\u003e \u003cp\u003eThe 24 by 12 by 10 foot dimensions at the base configuration are well-sized for real-ball backyard use. The 24-foot length is 2 feet longer than the Power Alley, which means slightly more visual feedback on hits. The 12-foot width is identical to the Power Alley and accommodates full-swing clearance. The 10-foot height is 2 feet taller than the Power Alley, which is meaningful for pop flies and for adult or tall-player use, a 10-foot ceiling gives a high pop-fly more room before contacting the top net.\u003c\/p\u003e \u003ch2\u003eWho the Heater Xtender Is For\u003c\/h2\u003e \u003cp\u003eThe Xtender fits families that want a slightly larger real-ball cage than the Power Alley, particularly where the 2 feet of additional length or the 2 feet of additional height matter. It fits households that plan to extend the cage over time, the modularity is a real investment protection. It fits travel teams, clinics, and small facilities that need a cage capable of extending to full training-tunnel length. And it fits baseball or softball programs at the high school level or above that want a home-training solution for players between practices.\u003c\/p\u003e \u003cp\u003eFor strict cost minimization where 22 feet and 8 feet high are enough, the Power Alley at $199.99 is the more economical choice. For typical backyard use at 24 feet and where you may want to extend the cage someday, the Xtender is the better long-term value. For commercial-grade heavy use where the cage sees daily all-day use, a facility-grade cage at 3-5x the price is the right tool, but very few home users need that.\u003c\/p\u003e \u003ch2\u003eHeater Xtender Batting Cage Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: XT299 (24-foot starting configuration)\u003c\/li\u003e \u003cli\u003eAvailable lengths: 24', 30', 36', 48', 54', 60', 66', 72' (sold as extensions)\u003c\/li\u003e \u003cli\u003eBase dimensions: 24 feet long x 12 feet wide x 10 feet high\u003c\/li\u003e \u003cli\u003eFrame: steel tubing side supports with flexible fiberglass overhead arches\u003c\/li\u003e \u003cli\u003eFrame protection: foam padding at impact zones\u003c\/li\u003e \u003cli\u003eNetting: 1-inch polyethylene\u003c\/li\u003e \u003cli\u003eAnchors: 6 steel ground stakes with nylon support ropes\u003c\/li\u003e \u003cli\u003eMachine harness: built-in, sized for Heater Sports pitching machines\u003c\/li\u003e \u003cli\u003eBall compatibility: real baseballs, real softballs\u003c\/li\u003e \u003cli\u003eRecommended ages: 6 years to adult\u003c\/li\u003e \u003cli\u003eUse: outdoor backyard, can be adapted for indoor facility use\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eThe Xtender 24-foot package includes the steel and fiberglass frame assembly, the 1-inch polyethylene net, six steel ground stakes, nylon support ropes, foam padding for the frame impact zones, the built-in pitching machine harness, and printed assembly instructions. No pitching machine and no baseballs or softballs are included. The extension sections (30-72 foot options) are sold separately.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eCan I use real baseballs in this cage?\u003c\/h3\u003e \u003cp\u003eYes. The Xtender is designed for real baseballs and real softballs at typical youth, high school, and adult machine speeds.\u003c\/p\u003e \u003ch3\u003eWhat's the difference between the Xtender and Power Alley cages?\u003c\/h3\u003e \u003cp\u003eThe Power Alley is a fixed 22 by 12 by 8 foot cage at $199.99. The Xtender starts at 24 by 12 by 10 feet at $299.99 and extends to 72 feet in sections. The Xtender also uses foam frame padding, which the Power Alley does not. For backyard use at a single fixed length, the Power Alley is more economical. For setups that may extend over time or need the extra length or height, the Xtender is the choice.\u003c\/p\u003e \u003ch3\u003eWhat pitching machines work with this cage?\u003c\/h3\u003e \u003cp\u003eAll Heater Sports real-baseball pitching machines (Heater Jr., Pro Curve, Real Baseball) work with the Xtender harness, as does the 12-inch softball machine (HTR6000SB). The harness is not sized for commercial three-wheel machines or competitor-brand machines.\u003c\/p\u003e \u003ch3\u003eHow do I extend the cage to a longer length?\u003c\/h3\u003e \u003cp\u003ePurchase an extension section sized to the total length you want (30-72 foot options). Each extension includes additional frame sections and net. The extension connects to the existing 24-foot cage frame with matched connectors. Setup takes about 30 extra minutes per 6-foot extension.\u003c\/p\u003e \u003ch3\u003eHow long does initial setup take?\u003c\/h3\u003e \u003cp\u003eFirst-time setup of the 24-foot base cage takes about 30-45 minutes working alone, or 20 minutes with a helper. The steel frame takes a bit longer than fiberglass-only cages because the connections are more structural. Subsequent setups are faster once you know the pattern.\u003c\/p\u003e \u003ch3\u003eCan I use it indoors?\u003c\/h3\u003e \u003cp\u003eThe Xtender is primarily an outdoor cage, but can be adapted for indoor facility use. Remove the ground stakes and replace with weighted base plates or sandbag anchors. For high-ceiling facilities, the 10-foot height fits. For home garages or basements, the cage is typically too tall.\u003c\/p\u003e \u003ch3\u003eWill it survive weather?\u003c\/h3\u003e \u003cp\u003eThe steel frame, fiberglass arches, and polyester-blend netting all tolerate typical outdoor conditions well. The foam padding is UV-resistant. For maximum cage life, take the cage down during extended severe weather (heavy snow, high wind) and for winter storage in cold climates. Regular outdoor use across typical seasonal conditions is the cage's intended use case.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333999624507,"sku":"T04-XT299","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/home-batting-cage-12-x-12-x-24-1-hobaca.jpg?v=1781230511"},{"product_id":"xtender-30-home-batting-cage-30x12x12","title":"XTender 30 Home Batting Cage (30x12x12)","description":"\u003cp\u003eXtender 30 Home Batting Cage 30' x 12' x 12' Real Ball Home Batting Cage from Trend Sports® Amazing All-In-One Package Makes Set-Up A Breeze! The Xtender Batting Cage is the most revolutionary batting cage ever developed! Never before have you been able to purchase a complete batting cage and have it shipped directly to your door via UPS. The secret lies in the frame design and netting. First, the frame's side supports are made of steel tubing to give the frame durability and maximum swinging area for the batter. Second, the middle arch of the frame is made of flexible fiberglass rod. This rod allows the cage to flex in the wind without bending or breaking. Third, the six power stakes are staked into the ground to give maximum frame support. Fourth, a rugged foam pad slides over each frame support to protect the frame from balls. Fifth, the extra strength catch net is made of 1\" polypropylene netting compared to 2\" netting used on other cages. This smaller netting provides twice as much strength in the same amount of space. In fact, this netting is so small it doubles as a golf cage. Imagine what a great golfer you'll be when your hitting hundreds of golf balls into your cage on a daily basis. And because you can connect Xtender cages together, you can increase the length of your cage just by ordering another Xtender Cage. Don't let another day go by without owning your own batting cage. The Xtender comes with a 30 day money back guarantee and 1 year limited warranty. Order yours today! Features • Solid Steel \u0026amp; Fiberglass Frame • Foam Padding • 1\" Polypropylene Netting • Steel Ground Stakes and Nylon Support Ropes • Built-in Pitching Machine Harness • Works Perfectly with Trend Sports Pitching Machines Benefits • Fiberglass poles assemble quickly while adding strength and stability • Foam Padding protects frame from damage • 1\" Polypropylene Netting is durable and strong • Steel Ground Stakes provide rugged support • Built-in Harness connects easily to pitching machine Key Specs: • Model #: XT399 • 30 ft. Long, 12 ft. Wide, 12 ft. High • Recommended Ages: 6 years to Adult • 30-Day Money Back Guarantee - One Year Warranty • Use for Baseball or Golf **Shipping Charges May Apply**\u003c\/p\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51333999984955,"sku":"T04-XT30","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/xtender-30-home-batting-cage-30x12x12-1.jpg?v=1781230511"},{"product_id":"xtender-36-home-batting-cage-36x12x12","title":"XTender 36 Home Batting Cage (36x12x12)","description":"\u003cp\u003eXtender 36 Home Batting Cage 36' x 12' x 12' Real Ball Home Batting Cage from Trend Sports® Amazing All-In-One Package Makes Set-Up A Breeze! The Xtender Batting Cage is the most revolutionary batting cage ever developed! Never before have you been able to purchase a complete batting cage and have it shipped directly to your door via UPS. The secret lies in the frame design and netting. First, the frame's side supports are made of steel tubing to give the frame durability and maximum swinging area for the batter. Second, the middle arch of the frame is made of flexible fiberglass rod. This rod allows the cage to flex in the wind without bending or breaking. Third, the six power stakes are staked into the ground to give maximum frame support. Fourth, a rugged foam pad slides over each frame support to protect the frame from balls. Fifth, the extra strength catch net is made of 1\" polypropylene netting compared to 2\" netting used on other cages. This smaller netting provides twice as much strength in the same amount of space. In fact, this netting is so small it doubles as a golf cage. Imagine what a great golfer you'll be when your hitting hundreds of golf balls into your cage on a daily basis. And because you can connect Xtender cages together, you can increase the length of your cage just by ordering another Xtender Cage. Don't let another day go by without owning your own batting cage. The Xtender comes with a 30 day money back guarantee and 1 year limited warranty. Order yours today! Features • Solid Steel \u0026amp; Fiberglass Frame • Foam Padding • 1\" Polypropylene Netting • Steel Ground Stakes and Nylon Support Ropes • Built-in Pitching Machine Harness • Works Perfectly with Trend Sports Pitching Machines Benefits • Fiberglass poles assemble quickly while adding strength and stability • Foam Padding protects frame from damage • 1\" Polypropylene Netting is durable and strong • Steel Ground Stakes provide rugged support • Built-in Harness connects easily to pitching machine Key Specs: • Model #: XT399 • 36 ft. Long, 12 ft. Wide, 12 ft. High • Recommended Ages: 6 years to Adult • 30-Day Money Back Guarantee - One Year Warranty • Use for Baseball or Golf **Shipping Charges May Apply**\u003c\/p\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334000017723,"sku":"T04-XT399","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/xtender-36-home-batting-cage-36x12x12-1.jpg?v=1781230511"},{"product_id":"flexible-top-batting-tee","title":"Flexible Top Batting Tee","description":"\u003cp\u003eLooking for a batting tee that lasts multiple seasons and will not tip over? The Flop Top Flex-A-Tee Travel Tee from Heater Sports™ is the answer! This easy to use hitting tee assembles quickly, is lightweight and makes it easy to practice your swing anywhere. The innovative Flop Top design means the tee will never tip over. An adjustable height and sturdy tripod configuration make this versatile tee a great training aid for baseball and softball players of all ages and skill levels.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFlop Top Design for real ball feel\u003c\/li\u003e \u003cli\u003eReduces wear and tear for longer tee life\u003c\/li\u003e \u003cli\u003eLightweight, beautiful design\u003c\/li\u003e \u003cli\u003eQuickly folds out for easy assembly\u003c\/li\u003e \u003cli\u003eAdjustable height for any strike zone\u003c\/li\u003e \u003cli\u003eFits easily in to bat bags\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eTry the Flex-A-Tee flexible top batting tee today to get the most out of your training.\u003c\/p\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334002114875,"sku":"T04-FTBT2499TT","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/flexible-top-batting-tee-5.jpg?v=1781230512"},{"product_id":"heater-pitching-machine-softball","title":"Heater Sports 12 Inch Softball Pitching Machine with Auto Ball Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Sports 12 Inch Softball Pitching Machine is the softball-specific version of Heater's real-ball pitching platform, calibrated for regulation 12-inch softballs. It throws fastpitch and slowpitch at variable speeds up to 50 MPH, includes a bonus automatic ball feeder, and uses the same 1\/4 horsepower motor as Heater's premium baseball machines. Model HTR6000SB. At $449.99 it is the same price point as the baseball version, with the same frame, motor, and tilt-adjustment features, the difference is in wheel calibration for the larger, lighter softball.\u003c\/p\u003e \u003cp\u003eFor a softball program or family that wants a real-softball machine that can serve both fastpitch hitters and slowpitch recreational players, this machine covers both use cases from the same unit. The tilt-adjustable housing also turns it into a tool for infield and outfield fielding drills, a meaningful feature that a single-purpose pitching machine doesn't offer.\u003c\/p\u003e \u003ch2\u003eDesigned for 12-Inch Softballs Specifically\u003c\/h2\u003e \u003cp\u003eSoftball pitching machines are not just baseball machines with different settings. The wheel diameter, the ball exit geometry, and the motor-to-ball timing all need to be calibrated for the larger softball diameter and lighter ball weight. A baseball machine fed softballs will throw inconsistent and inaccurate pitches because the wheel contact geometry is wrong for the ball size.\u003c\/p\u003e \u003cp\u003eThe HTR6000SB is calibrated specifically for regulation 12-inch softballs. Fastpitch and slowpitch both work from the same wheel, the tilt adjustment on the housing changes pitch trajectory to match either style. For a slowpitch player working on arc-and-contact timing, tilt the machine up to produce a higher-arc delivery. For a fastpitch hitter working on reaction to flat fastballs, keep the housing level.\u003c\/p\u003e \u003ch2\u003eVariable Speed Up to 50 MPH\u003c\/h2\u003e \u003cp\u003eSpeed control covers the full range up to 50 MPH, which matches typical pitch speeds in high school and recreational adult fastpitch leagues. For younger players, dial the speed down to 25-30 MPH for comfortable contact work. For middle school and high school fastpitch, 40-48 MPH is game-speed practice. Slowpitch players typically train at lower speeds with the housing angled for arc. The wide range means one machine covers a player's development from introduction to regulation-speed softball.\u003c\/p\u003e \u003cp\u003eFor recreational adult slowpitch leagues where game pitches are typically 25-35 MPH with a high arc, the Heater machine can reproduce that delivery with the housing angled up. It is not a pitch-recognition trainer the way breaking-ball machines are, but for timing and contact quality work at real game speeds, it covers the essentials.\u003c\/p\u003e \u003ch2\u003e1\/4 HP Motor, Same Premium Build\u003c\/h2\u003e \u003cp\u003eThe 1\/4 horsepower motor is the same component Heater uses in their higher-end real-baseball machines. For softball use, that motor rating translates to consistent pitching through long team practices without heat-soak degradation. A softball program running 30-minute batting practice rounds with four or five hitters rotating through can rely on the same pitch speed and trajectory across the whole session.\u003c\/p\u003e \u003cp\u003eThe frame is tubular steel with rubber-tipped legs. At 51 pounds, the softball machine is slightly heavier than the baseball version (47 pounds), likely reflecting the adjusted wheel and housing configuration for the softball size. The weight improves pitching consistency because the machine stays planted under pitch recoil. Rubber tips protect gym floors for indoor use and provide anti-slip traction on turf or grass outdoors.\u003c\/p\u003e \u003ch2\u003eTilt-Adjustable for Fielding Drills\u003c\/h2\u003e \u003cp\u003eA softball-specific feature that is genuinely useful: the tilt-adjustable housing converts the machine into a fielding drill tool. Tilt down for ground balls for infielders. Tilt up for pop flies for outfielders. For a softball team with limited practice field time, running a batting station plus an outfield pop-fly rotation plus an infield grounder rotation all off one machine is a practical way to cover multiple skill areas in a single practice.\u003c\/p\u003e \u003cp\u003eA typical softball team practice with this machine: 25 minutes of batting practice (fastpitch or slowpitch per player preference), 15 minutes of outfield pop-fly rotation, 15 minutes of infield grounder work. One machine, three stations, minimal equipment swap.\u003c\/p\u003e \u003ch2\u003eBonus 12-Ball Automatic Feeder\u003c\/h2\u003e \u003cp\u003eThe free automatic ball feeder holds 12 regulation softballs and drops one into the machine every 10 seconds. Two minutes of continuous pitching per full load. The feeder is included at no extra cost, which is the effective bundle advantage, separately purchased machine and feeder would cost more than this combined package. For team batting practice, the feeder means the coach running the station focuses on instruction with the hitter rather than hand-feeding balls.\u003c\/p\u003e \u003ch2\u003ePower: A\/C or Portable Pack\u003c\/h2\u003e \u003cp\u003eThe machine plugs into any standard 110V A\/C wall outlet. It also works with generators providing clean 110V output and with Heater's optional Hot Box portable power stations (600 peak or 1200 peak). For softball field practice without dedicated power, the Hot Box 600 handles typical team batting practice sessions and the Hot Box 1200 gives additional headroom for longer or more intensive sessions. The portable power pack is sold separately.\u003c\/p\u003e \u003ch2\u003eWho the Heater Softball Machine Is For\u003c\/h2\u003e \u003cp\u003eThis machine fits softball programs and players who want a real-softball machine with fielding-drill versatility at a home-user price point. That includes high school softball programs looking for a cost-effective batting practice machine, travel softball teams needing a reliable team-practice unit, recreational adult slowpitch teams wanting pre-game batting practice, softball families with a youth fastpitch player (ages 8+) who want a machine that covers multiple seasons, and softball coaches running clinics or small-group training.\u003c\/p\u003e \u003cp\u003eIt is not the right machine for fastpitch programs at college or commercial-facility level where 60+ MPH pitching and specialized pitch-type training (rise balls, drop balls, change-ups) are the priority. Those programs need commercial three-wheel machines in the $2,000+ range. For everyone else, high school, youth travel, recreational adult, the HTR6000SB covers the essential training use cases at a fraction of commercial machine pricing.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eA few drills that make the most of the softball machine's capabilities:\u003c\/p\u003e \u003cp\u003eFastpitch batting practice. Housing level, speed dialed to match game pace (40-48 MPH for high school, 30-40 for middle school). 10 swings per hitter, full team rotation.\u003c\/p\u003e \u003cp\u003eSlowpitch timing work. Housing angled up for arc, speed dialed to 25-35 MPH. Focus on contact quality and staying behind the ball rather than pulling. The consistent delivery helps slowpitch hitters calibrate timing before games.\u003c\/p\u003e \u003cp\u003eOutfield pop-fly rotation. Housing angled up to maximum, speed at 35-40 MPH, softballs exit with high arc. Station 2-3 outfielders and rotate 8-10 fly balls per player. Softball pop flies have different flight characteristics than baseball fly balls (heavier, shorter hang time), so softball-specific pop-fly practice matters.\u003c\/p\u003e \u003cp\u003eInfield grounder work. Housing angled down, speed at 30-35 MPH. Station infielders at normal defensive positions and rotate through. The consistency of machine-fed grounders lets coaches isolate fielding technique from pitch variability.\u003c\/p\u003e \u003cp\u003eFastpitch vs. slowpitch switching. Run a batting round at fastpitch level pitches, then switch housing angle to slowpitch arc for the next round. The adjustment takes 30 seconds and is useful for multi-sport families where one player is fastpitch and another is slowpitch.\u003c\/p\u003e \u003ch2\u003eHeater Sports 12 Inch Softball Pitching Machine Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: HTR6000SB (includes 12-ball automatic feeder)\u003c\/li\u003e \u003cli\u003eMotor: 1\/4 horsepower electric motor\u003c\/li\u003e \u003cli\u003ePitch speed: up to 50 MPH variable\u003c\/li\u003e \u003cli\u003ePitch types: fastpitch and slowpitch (tilt-adjustable for arc)\u003c\/li\u003e \u003cli\u003eBall compatibility: 12-inch regulation softballs only\u003c\/li\u003e \u003cli\u003eBall feeder: 12-ball automatic feeder, pitches every 10 seconds (included)\u003c\/li\u003e \u003cli\u003eWheel: fully enclosed pitching wheel, calibrated for 12-inch softballs\u003c\/li\u003e \u003cli\u003eFrame: tubular steel legs with rubber tips\u003c\/li\u003e \u003cli\u003ePower: standard 110V A\/C (cord included), optional Hot Box portable power pack sold separately\u003c\/li\u003e \u003cli\u003eWeight: 51 pounds\u003c\/li\u003e \u003cli\u003eRecommended ages: 8 years to adult\u003c\/li\u003e \u003cli\u003eCompatible cages: Heater Sports Power Alley 22', Xtender 24-72'\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eThe softball machine ships with the pitching machine housing, the 12-ball automatic ball feeder, the tubular steel tripod frame with rubber-tipped legs, the A\/C power cord, and the printed instruction manual. Regulation 12-inch softballs are sold separately, Heater's 12-inch pitching machine softballs are the recommended ball for wheel compatibility and pitch consistency. Ball shaggers, batting cages, machine covers, and portable power packs are sold separately.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eCan this machine throw baseballs?\u003c\/h3\u003e \u003cp\u003eNo. The HTR6000SB is calibrated specifically for 12-inch softballs. The wheel geometry is wrong for the smaller, heavier baseball, and pitches would be inconsistent and inaccurate. If you need a baseball machine, the Heater Sports Real Baseball Machine (HTR6000BBC) is the equivalent baseball version.\u003c\/p\u003e \u003ch3\u003eFastpitch, slowpitch, or both?\u003c\/h3\u003e \u003cp\u003eBoth. Keep the housing level for fastpitch-style flat pitches. Angle the housing up for slowpitch arc. The variable speed control covers the range both styles need.\u003c\/p\u003e \u003ch3\u003eDoes it throw curveballs or change-ups?\u003c\/h3\u003e \u003cp\u003eNo. This is a single-wheel fastball machine. It cannot produce the spin variation needed for rise balls, drop balls, or change-ups. Dedicated pitch-type training requires a commercial three-wheel machine, which typically runs $2,000+.\u003c\/p\u003e \u003ch3\u003eWhat about 11-inch softballs?\u003c\/h3\u003e \u003cp\u003eThe machine is calibrated for 12-inch regulation softballs. 11-inch softballs can be used but pitch accuracy may vary because the wheel contact geometry is slightly off. For a program primarily using 11-inch softballs, contact Heater Sports to confirm machine compatibility.\u003c\/p\u003e \u003ch3\u003eHow much space do I need?\u003c\/h3\u003e \u003cp\u003ePlan for at least 25 feet of pitching distance and 10-15 feet of clearance behind the hitter for a backstop. For outdoor backyard use, a sturdy backstop net is essential because softballs at 45+ MPH travel far. Indoor use requires a gym or commercial facility with adequate space.\u003c\/p\u003e \u003ch3\u003eDoes it work with a batting cage?\u003c\/h3\u003e \u003cp\u003eYes. The Heater Sports Power Alley 22 foot and Xtender 24-72 foot cages are sized to work with the softball machine. Both are marketed as baseball-or-softball cages, the netting and frame handle either ball type.\u003c\/p\u003e \u003ch3\u003eHow portable is it?\u003c\/h3\u003e \u003cp\u003eAt 51 pounds, one adult can move it short distances. For longer carries or stairs, two people make it easier. It is designed primarily for stationary team-practice use with occasional short-distance moves, not for regular long-distance transport.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334002180411,"sku":"T04-HTR6000SB","price":449.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-pitching-machine-softball-5.jpg?v=1781230538"},{"product_id":"spring-away-pro-7-x-7-pop-up-batting-practice-net","title":"Spring Away Pro 7' x 7' Pop-Up Batting Practice Net","description":"\u003cp\u003eWhen practice time or an impromptu game pops up, you'll be ready for action with the \u003cstrong\u003eSpring Away Pro 7' x 7' Pop-Up Batting Practice Net\u003c\/strong\u003e by Heater Sports. This 7-foot by 7-foot hitting net collapses for easy storage but can be ready for use in seconds and is perfectly sized to serve as a catch net for baseball or other sports. However you use it, you can trust its heavy-duty tubular steel base to stand up to the force of the most powerful hits and throws, and the 1-inch poly netting is ultra durable to ensure years of fun.\u003c\/p\u003e \u003cp\u003eThe Spring Away Pro 7'x7' Pop-Up Net is incredibly easy to use. Its spring push-pin base allows it to be assembled and disassembled in seconds, so you won't have to delay the game or practice to get things set up. The net can stand upright on its own with the integrated fiberglass support inserts included with the design. For added strength and for use on windy days, you can secure the pop-up tent with the provided metal ground stakes. Once the pop-up net is assembled, you can practice your aim with the built-in red perimeter target located at the center of the net. This pop-up net pairs perfectly with the Spring Away Batting Tee and the Big League Soft Toss Machine, sold separately.\u003c\/p\u003e \u003cp\u003eA free carrying and storage bag is included.\u003c\/p\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334003097915,"sku":"T04-ZPR129","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/spring-away-pro-7-x-7-pop-up-batting-practice-net-1-with-baseball-player.jpg?v=1781230540"},{"product_id":"12-ft-mini-lite-ball-home-batting-cage","title":"Heater Sports Home Run 12 Ft. Lite Ball Backyard Batting Cage","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Sports Home Run is a compact 12-foot backyard batting cage built specifically for lite-ball and mini-ball practice. It covers a 12 by 12 foot footprint and stands 10 feet tall, which fits in most suburban backyards without dominating the space. The cage ships with a fiberglass frame that arches together in minutes, durable 1 1\/4 inch polyethylene netting, and steel ground stakes that anchor it securely against wind and the impact of hit baseballs and softballs.\u003c\/p\u003e \u003cp\u003eThis is the right cage for families using lite-ball or mini-ball machines like the Heater Slider or Crusher Curve, or for tee work and soft toss with soft training balls. It is not built to contain regulation real baseballs hit with full power. For a real-ball setup, the Heater Power Alley 22 foot or Xtender 24 foot cages are better choices.\u003c\/p\u003e \u003ch2\u003eSized for the Backyard, Not the Facility\u003c\/h2\u003e \u003cp\u003eThe 12 by 12 by 10 foot dimensions strike a balance that matters. Smaller cages feel cramped for a full swing and limit how much the hitter can drive the ball before it catches the net. Bigger cages eat the whole yard. A 12 foot deep cage gives a hitter enough room to complete a natural swing and watch the ball travel a few feet before it hits the net, which gives useful visual feedback on contact quality. The 10 foot height accommodates high pop-ups from lite balls and gives the hitter overhead clearance for a full swing plane.\u003c\/p\u003e \u003cp\u003eThis sizing works well for youth baseball players roughly 6 to 13 years old using lite or mini balls, for adult hitters taking soft toss, or for general family backyard practice. A serious teenage or adult hitter swinging at full effort with real baseballs will overwhelm the cage quickly, which is why Heater is explicit about the lite-ball use case.\u003c\/p\u003e \u003ch2\u003eFiberglass Frame With Steel Stake Anchors\u003c\/h2\u003e \u003cp\u003eThe frame uses DuraFlex fiberglass arches, which is a deliberate choice for a cage this size. Fiberglass flexes under impact and wind rather than bending or creasing like thin steel. When a lite ball hits the frame post, the fiberglass absorbs the impact and returns to shape. Six steel ground stakes anchor the cage at the base and nylon support ropes add tension to the frame. Setup is tool-free and tool-free takedown is just as fast, which matters if you want to store the cage in a garage between practice sessions or move it across the yard to chase shade.\u003c\/p\u003e \u003cp\u003eAssembly typically takes 20 to 30 minutes for first-time users working alone, or 10 to 15 minutes with help. Subsequent setups are faster because you already know the order the pieces fit together.\u003c\/p\u003e \u003ch2\u003eBuilt-in Pitching Machine Opening\u003c\/h2\u003e \u003cp\u003eA 12 inch by 8 inch opening is built into one end of the cage to feed a pitching machine through the net. The opening is sized specifically for Heater Sports mini-ball and lite-ball machines (Slider, Crusher Curve, Big League Drop Toss), so the machine sits outside the cage and pitches balls through the opening to the hitter inside. That keeps the machine and the hitter safely separated, and it means the machine does not take up usable hitting space inside the cage.\u003c\/p\u003e \u003cp\u003eIf you already own a Heater mini or lite-ball machine, the Home Run is the turnkey cage companion. If you do not have a machine, you can still use the cage for tee work, soft toss, or front toss from a coach standing just outside the opening.\u003c\/p\u003e \u003ch2\u003eWho the Heater Home Run Cage Is For\u003c\/h2\u003e \u003cp\u003eThe Home Run cage is best for parents setting up a first backyard baseball or softball training space for a youth player, Little League or coach-pitch families whose player is working on swing mechanics with lite balls, and households using a Heater Slider or Crusher Curve and wanting a dedicated space to run practice sessions without chasing balls across the yard. The price point makes it accessible as a first serious cage, and the lite-ball design means damage risk to siding, fences, and neighbors is significantly lower than a real-ball setup.\u003c\/p\u003e \u003cp\u003eIt is not the cage for a high school player taking real-ball batting practice at full speed, a travel team practice setup that needs serious durability, or anyone who wants to use real baseballs at meaningful pitch speeds. For those scenarios, look at the Power Alley 22 foot or Xtender 24 foot cages.\u003c\/p\u003e \u003ch2\u003eSetup, Storage, and Weather\u003c\/h2\u003e \u003cp\u003eSet up takes about 20 minutes the first time, less than 10 after you know the pattern. The cage is designed for outdoor use and the stakes are essential for wind resistance. Leave the cage staked for the season if your yard permits, or pull stakes and fold the frame for winter storage. Fiberglass and the polyester-blend netting tolerate sun and rain well, but extending cage life means taking it down for the off-season or during extended severe weather.\u003c\/p\u003e \u003cp\u003eFor indoor use, the cage can be adapted by removing the stakes and weighting the base with sandbags or similar, but most indoor setups will want a purpose-built indoor cage. The Home Run is primarily a backyard product.\u003c\/p\u003e \u003ch2\u003eHeater Home Run Batting Cage Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eModel: HRBC99\u003c\/li\u003e \u003cli\u003eDimensions: 12 feet long x 12 feet wide x 10 feet high\u003c\/li\u003e \u003cli\u003eFrame: DuraFlex fiberglass arches with steel ground stake anchors\u003c\/li\u003e \u003cli\u003eNetting: 1 1\/4 inch polyethylene net\u003c\/li\u003e \u003cli\u003ePitching machine opening: 12 inch x 8 inch, compatible with Heater Sports mini and lite-ball machines\u003c\/li\u003e \u003cli\u003eBall compatibility: lite-balls, mini lite-balls, lite-softballs (NOT regulation real baseballs)\u003c\/li\u003e \u003cli\u003eAnchors: 6 steel ground stakes with nylon support ropes\u003c\/li\u003e \u003cli\u003eRecommended ages: 6 years to adult\u003c\/li\u003e \u003cli\u003eUse: outdoor backyard, primarily; adaptable for indoor with alternate anchoring\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cp\u003eThe Home Run cage ships with the fiberglass frame assembly (arches and connectors), the 1 1\/4 inch polyethylene net, six steel ground stakes, nylon support ropes, and printed assembly instructions. No pitching machine and no baseballs or softballs are included. Plan on purchasing lite or mini balls separately, and consider a compatible Heater Sports lite-ball machine for a complete setup.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eCan I use real baseballs in this cage?\u003c\/h3\u003e \u003cp\u003eNo. The Home Run is specifically designed for lite-balls, mini-balls, and lite-softballs. Real baseballs at meaningful pitch speeds will stress the netting and frame beyond design tolerances. If you need a real-ball cage, the Heater Power Alley 22 foot or Xtender 24 foot are sized and built for that use.\u003c\/p\u003e \u003ch3\u003eHow long does assembly take?\u003c\/h3\u003e \u003cp\u003eExpect 20 to 30 minutes for first-time solo assembly, or 10 to 15 minutes with a helper. After the first setup, repeat setups take under 10 minutes.\u003c\/p\u003e \u003ch3\u003eWhat pitching machines work with this cage?\u003c\/h3\u003e \u003cp\u003eThe 12 inch by 8 inch pitching machine opening fits Heater Sports lite-ball and mini-ball machines including the Slider, Crusher Curve, and Big League Drop Toss. Real-baseball machines like the Heater Jr. or Heater Pro Curve should be paired with a real-ball cage instead.\u003c\/p\u003e \u003ch3\u003eWill it survive the weather?\u003c\/h3\u003e \u003cp\u003eThe fiberglass frame and polyester netting tolerate sun, rain, and light wind well when staked properly. For best cage life, take it down before extended severe weather and for winter storage in cold climates. The 6 steel ground stakes and nylon support ropes are designed for sustained outdoor installation in typical backyard conditions.\u003c\/p\u003e \u003ch3\u003eCan the cage be extended to a longer length?\u003c\/h3\u003e \u003cp\u003eThe Home Run is a fixed 12 foot length. If you want a cage that can be extended by adding sections, the Heater Xtender line offers 24 foot through 72 foot configurations that can be joined to create a longer tunnel.\u003c\/p\u003e \u003ch3\u003eIs the netting replaceable if damaged?\u003c\/h3\u003e \u003cp\u003eReplacement netting is available from Heater Sports, sold separately. Contact the manufacturer for current part availability if you need a replacement.\u003c\/p\u003e \u003c\/div\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334003130683,"sku":"T04-HRBC99","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/12-ft-mini-lite-ball-home-batting-cage-1.jpg?v=1781230567"},{"product_id":"double-play-pitch-back-pitching-machine","title":"Double Play Pitch Back \u0026 Pitching Machine","description":"\u003cp\u003eIntroducing the Double Play 2-in-1 Pitch Back and Pitching Machine – your ultimate training companion for honing both your pitching and batting skills! Revolutionize your practice sessions with this versatile tool that combines innovation, durability, and convenience.\u003c\/p\u003e \u003cp\u003eFirst and foremost, experience the pitch back machine's prowess with a large 5x5 catch net crafted from heavy-duty nylon material. As you throw or pitch into the net, it adeptly catches and channels the ball into a pocket at the bottom. \u003cstrong\u003eBut that's just the beginning!\u003c\/strong\u003e Connected seamlessly to the bottom of the net is the pitch back machine itself. Once the ball rolls into the machine, it's thrown back to you, enabling hours of solo catch practice without the need for a partner. Adjust the machine's tilt to your preference – practice grounders, regular catch, line drives, or tilt it back for high fly balls. Replicate any type of throw to enhance your skills across the board.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAnd that's not all!\u003c\/strong\u003e The versatility doesn't end with catching practice. The pitch back machine is removable and comes with a heavy-duty tripod stand, transforming it into a top-notch pitching machine. Perfect your batting with speeds ranging from 10 to 48 MPH, featuring fastballs and customizable angles for grounders, pitching, line drives, and pop flies.\u003c\/p\u003e \u003cp\u003eThe Double Play doesn't stop at functionality. It's packed with features to elevate your training experience. The catch net includes a bonus front catch net to absorb the impact of even the fastest pitches. Attach the provided strike zone to fine-tune your pitching accuracy. The robust 1-inch metal base frame ensures stability and durability, while flexible fiberglass rods efficiently absorb the impact of hit balls. And when practice is done, the Double Play collapses swiftly for easy transport and storage.\u003c\/p\u003e \u003cp\u003eExperience the innovation firsthand – no more reliance on another person for catch practice! With the Double Play 2-in-1 Pitch Back and Pitching Machine, you can seamlessly train throwing, fielding, and hitting using this all-in-one training powerhouse. Embrace the future of solo practice and elevate your game like never before!\u003c\/p\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334031278395,"sku":"T04-DP249","price":299.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/double-play-pitch-back-pitching-machine-3-and-setup.jpg?v=1781230964"},{"product_id":"hit-line-solo-hitting-trainer","title":"Hit Line Solo Hitting Trainer","description":"\u003cp\u003eUnleash the Power of Your Swing with the Hit Line Swing Trainer!\u003c\/p\u003e \u003cp\u003eAre you tired of spending more time chasing balls than perfecting your swing? Introducing the Hit Line Swing Trainer – your ticket to honing your hitting skills like never before.\u003c\/p\u003e \u003cp\u003eDesigned with innovation in mind, this trainer boasts a unique construction featuring a tall end section, a shorter counterpart, and a connecting rope line. At the heart of this setup lies an adjustable swing-height regulation baseball suspended on a durable nylon strap. Swing, hit, and watch the ball soar up the line, providing instant swing feedback and a realistic hitting experience without the need to retrieve balls constantly. It's the ultimate solution for players of all ages looking to practice hitting stationary or moving pitches effortlessly.\u003c\/p\u003e \u003cp\u003eCrafted for durability and stability, the Hit Line Swing Trainer is a must-have for your backyard practice sessions. Staked firmly in the ground and supported by four robust ropes, it ensures reliable performance on grass or dirt surfaces, allowing you to focus solely on perfecting your swing.\u003c\/p\u003e \u003cp\u003eImagine the confidence boost you'll experience as you clock in hours of batting practice without ever leaving the comfort of your home. And with its regulation-weight and sized baseball, you'll enjoy an authentic hitting experience every time you swing.\u003c\/p\u003e \u003cp\u003eBut wait, it gets even better! We stand by the quality of our product, which is why the Hit Line Swing Trainer comes with a 30-day money-back guarantee. Not to mention, for your peace of mind, it's backed by a solid 1-year parts and labor warranty.\u003c\/p\u003e \u003cp\u003eJoin the league of satisfied hitters who've transformed their game with the Hit Line Swing Trainer. Elevate your batting skills, master your swing, and unlock your full potential – all in the convenience of your backyard. Experience the difference today!\u003c\/p\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334031409467,"sku":"T04-LD59BB","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/hit-line-solo-hitting-trainer-2.jpg?v=1781230964"},{"product_id":"1-ft-x-2-ft-heavy-duty-rubber-golf-hitting-mat","title":"1 Ft. x 2 Ft. Heavy Duty Rubber Golf Hitting Mat","description":"\u003cdiv\u003e \u003cp\u003eThe 1 Ft. x 2 Ft. Heavy Duty Rubber Golf Hitting Mat has a turf surface that simulates fairway and tee box conditions, with a water-resistant rubber base that resists sliding at impact. Compact at 12 by 24 inches and about 2 pounds, it fits easily in a garage, basement, or net setup for indoor swing work. A heavy-duty rubber tee is included for iron and driver practice. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: sport mismatch, supplier labels this as golf, no baseball\/softball framing possible --\u003e \u003c!-- FLAG: category uncertain, golf product in a baseball\/softball catalog, manual review --\u003e \u003c!-- FLAG: only 1 validated image found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079021371,"sku":"T04-MT1499","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/1-ft-x-2-ft-heavy-duty-rubber-golf-hitting-mat-htm-1.jpg?v=1781231789"},{"product_id":"basehit-poweralley-22-cage","title":"BaseHit \u0026 PowerAlley 22' Cage","description":"\u003cdiv\u003e \u003cp\u003eThe BaseHit \u0026amp; PowerAlley 22' Cage is a complete home batting practice setup that pairs a real-baseball pitching machine with a 22-foot netted cage, so players can take live swings in a backyard, driveway, or garage without chasing balls. The BaseHit machine throws real baseballs up to 45 mph and lite balls up to 80 mph, with variable speed control and an adjustable pitch height so one setup works for hitters from roughly 8 years old through high-school-level practice. For families and small teams that want repeatable at-home baseball reps without trips to commercial cages, this package covers the machine, the 12-ball auto-feeder, the stand, and the enclosure in one drop-shippable box.\u003c\/p\u003e \u003ch2\u003eReal-Baseball Pitching at Home\u003c\/h2\u003e \u003cp\u003eThe BaseHit machine pitches real leather or polyurethane baseballs, so hitters train against the same ball weight and flight they will see in games rather than adapting to lite-ball behavior. A 6-inch covered wheel cushions each ball as it enters the throwing head and releases a consistent strike, and the dual-bearing electric motor lets you dial in speeds from slow contact work up to harder-ball timing practice. An adjustable pitch-height knob moves the release point up or down, which matters for kids growing through different strike-zone heights and for mixing low, flat, and high looks inside the same baseball session.\u003c\/p\u003e \u003ch2\u003eAuto-Feeder Runs the Session\u003c\/h2\u003e \u003cp\u003eThe included 12-ball auto-feeder drops one baseball into the machine every 10 seconds, so hitters can work through a full round of swings without a coach or parent standing at the machine feeding. Two minutes yields 12 swings, which is a full round in most baseball training plans. The spiral feed arms load quickly between rounds, and the machine harness links the feeder, stand, and cage together for stable, predictable delivery.\u003c\/p\u003e \u003ch2\u003ePowerAlley 22-Foot Home Batting Cage\u003c\/h2\u003e \u003cp\u003eThe PowerAlley cage encloses a 22-foot long, 12-foot wide, 8-foot tall batting space, long enough for pitched reps from a compact machine while still fitting most driveways, garages, and modest backyards. Construction uses 1.25-inch polyester netting for ball retention and half-inch fiberglass rod arches for the frame, so the cage absorbs repeated foul balls and direct hits without deforming. A built-in harness locks the BaseHit machine to the cage, which keeps the machine and net aligned during use and keeps baseballs from flying out the front of the cage.\u003c\/p\u003e \u003ch2\u003eVariable Speed for Different Hitters\u003c\/h2\u003e \u003cp\u003eRunning one cage for multiple players, whether siblings at home or teammates at a team practice, is the main reason families buy package deals like this. Variable speed control lets a parent drop the pitch speed for a younger hitter doing tee-to-soft-toss transition work, then raise it for an older sibling hitting 40-plus mph line drives. The height-adjustable release handles the difference between short and tall hitters without resetting the whole machine. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003ch2\u003eWho This Baseball Cage Package Is For\u003c\/h2\u003e \u003cp\u003eThe BaseHit \u0026amp; PowerAlley 22' package suits youth through middle-school baseball players, plus families or small teams that want consistent at-home reps without renting cage time. The 45-mph real-ball speed is appropriate for hitters roughly 8 years and up, and the 80-mph lite-ball option gives older hitters faster timing work when they swap to the lighter ball. Coaches can use it for small-group stations in a gym or barn during winter, and travel players can use it for daily swings during the season when practice facilities are not available.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eThe most common use is straightforward batting practice: set the speed, set the release height, run rounds of 12, track contact quality. Beyond that, the machine supports front-toss replacement during team warmups, situational hitting drills (bunt, hit-and-run, two-strike swing), and overload\/underload sessions alternating lite and regulation baseball weights. The cage itself doubles as a self-contained hitting station for tee work and soft toss when the machine is off, so it does not sit idle between machine sessions.\u003c\/p\u003e \u003ch2\u003eBaseHit \u0026amp; PowerAlley 22' Cage Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePitching machine speed: up to 45 mph with real baseballs, up to 80 mph with lite balls\u003c\/li\u003e \u003cli\u003eAuto-feeder capacity: 12 baseballs, one ball every 10 seconds\u003c\/li\u003e \u003cli\u003eCage dimensions: 22 ft long, 12 ft wide, 8 ft tall\u003c\/li\u003e \u003cli\u003eCage net: 1.25-inch polyester\u003c\/li\u003e \u003cli\u003eCage frame: half-inch fiberglass rod arch with steel side supports\u003c\/li\u003e \u003cli\u003eStand: heavy-duty tubular steel tripod with pushpin legs\u003c\/li\u003e \u003cli\u003eRelease height: adjustable via height knob\u003c\/li\u003e \u003cli\u003ePower: 110V AC wall outlet\u003c\/li\u003e \u003cli\u003eAge range: 8 years through adult\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eBaseHit real-ball pitching machine\u003c\/li\u003e \u003cli\u003eOne polyurethane pitching machine baseball\u003c\/li\u003e \u003cli\u003e12-ball auto-feeder\u003c\/li\u003e \u003cli\u003eTubular steel tripod stand with pushpin legs\u003c\/li\u003e \u003cli\u003eBuilt-in machine harness\u003c\/li\u003e \u003cli\u003ePowerAlley 22-foot home batting cage (net, frame, ground stakes)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAdditional pitching machine baseballs are sold separately and are recommended for extended sessions so the machine gets time between refills. The package ships in boxes for home assembly.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eDoes this machine throw curveballs?\u003c\/h3\u003e \u003cp\u003eNo. The BaseHit is a fastball-only machine with variable speed control. Hitters see consistent straight pitches at whatever speed you set.\u003c\/p\u003e \u003ch3\u003eCan I use my own baseballs?\u003c\/h3\u003e \u003cp\u003eRegulation leather baseballs work, as do lite baseballs and polyurethane pitching machine baseballs. Heavier or unusually-seamed baseballs can wear the machine's wheel faster, so pitching-machine-specific baseballs are the best choice for daily use.\u003c\/p\u003e \u003ch3\u003eHow much space do I need for the cage?\u003c\/h3\u003e \u003cp\u003ePlan on a flat clear space at least 22 ft long, 12 ft wide, and 8 ft tall, plus a few feet of clearance on each side. Most suburban driveways and backyards accommodate it. The cage can come down and go back up between sessions if needed.\u003c\/p\u003e \u003ch3\u003eDoes it work indoors?\u003c\/h3\u003e \u003cp\u003eYes, in spaces with at least 8 feet of overhead clearance and a concrete or turf floor. Garages, barns, and converted outbuildings all work.\u003c\/p\u003e \u003ch3\u003eHow loud is it?\u003c\/h3\u003e \u003cp\u003eThe electric motor runs at roughly the volume of a household fan. It is quiet enough for backyard use without disturbing neighbors. The ball impact on the net is the louder sound.\u003c\/p\u003e \u003ch3\u003eDoes one person need to feed the machine?\u003c\/h3\u003e \u003cp\u003eNo. The 12-ball auto-feeder handles feeding, so a hitter can practice solo or with one non-feeding partner tracking results.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079185211,"sku":"T04-BH399","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/basehit-poweralley-22-cage-htm-5.jpg?v=1781231789"},{"product_id":"basehit-xtender-24","title":"BaseHit \u0026 Xtender 24","description":"\u003cdiv\u003e \u003cp\u003eThe BaseHit \u0026amp; Xtender 24 pairs the BaseHit real-baseball pitching machine with the larger Xtender 24-foot home batting cage, giving hitters a longer, taller practice space than the 22-foot PowerAlley while using the same machine and auto-feeder. At 24 feet long, 12 feet wide, and 10 feet tall, the Xtender cage fits older hitters with longer follow-throughs and accommodates higher release points for baseball and softball drills. The BaseHit machine throws real baseballs up to 45 mph and lite balls up to 80 mph, which is appropriate for hitters roughly 8 years and up. This is a drop-shippable package for families who want a full backyard batting cage without committing to a full commercial footprint.\u003c\/p\u003e \u003ch2\u003eWhy Choose the Xtender 24 Over the Shorter Cage\u003c\/h2\u003e \u003cp\u003eThe Xtender 24's extra length and height matter most for older hitters. Two extra feet of depth gives the baseball more flight time between the machine and the plate, which makes timing work feel closer to real at-bats. Two extra feet of height clears tall hitters on the load-up and follow-through, and it gives higher release points room to arrive in the strike zone instead of hitting the net on the way in. For families whose hitters are 12 and up, the Xtender 24 is typically the better pick.\u003c\/p\u003e \u003ch2\u003eReal-Baseball Pitching Machine\u003c\/h2\u003e \u003cp\u003eThe BaseHit pitches real leather or polyurethane baseballs so hitters train against the actual ball weight they see in games. A 6-inch covered wheel cushions each pitch, and the dual-bearing electric motor delivers consistent strikes across the speed range. An adjustable pitch-height knob controls the release point, and variable speed control lets you dial pitches for younger and older hitters in the same baseball session. The machine weighs enough to stay planted on its heavy-duty tubular steel tripod but is still portable between the garage and the yard.\u003c\/p\u003e \u003ch2\u003e12-Ball Auto-Feeder\u003c\/h2\u003e \u003cp\u003eThe 12-ball auto-feeder drops one baseball into the machine every 10 seconds, so a hitter works through a full round without a coach at the machine. The spiral loader reloads quickly, and the built-in harness aligns the feeder, stand, and cage so baseballs enter the throwing head at the same spot every time. A single pitcher-hitter pair can run an hour of rounds with no dead time beyond reloading.\u003c\/p\u003e \u003ch2\u003eXtender 24 Home Batting Cage\u003c\/h2\u003e \u003cp\u003eThe Xtender 24's frame combines tubular steel side supports with a flexible fiberglass-rod arch, which gives the structure durability against direct hits while keeping the assembly light enough for home setup. The 1.25-inch polyester net wraps the frame and stakes down with six heavy-duty steel stakes for a stable foundation. A built-in machine harness connects the BaseHit to the cage, which stops balls from exiting the front of the cage and keeps machine alignment stable across sessions.\u003c\/p\u003e \u003ch2\u003eWho This Baseball Cage Package Is For\u003c\/h2\u003e \u003cp\u003eThe BaseHit \u0026amp; Xtender 24 package suits families with middle-school through high-school-age hitters, travel-team players who need reliable at-home reps, and small teams or coaches running off-season practices in a shared backyard or barn. The 45-mph real-ball speed covers the range most amateur hitters train at, and the 80-mph lite-ball option gives older hitters faster timing work. Softball hitters also use it with softballs that fit in the 6-inch wheel housing and lite-ball options.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eCommon session patterns include baseline batting practice rounds of 12, situational work (bunt, opposite-field, two-strike swing), timing work at different speeds, and lite-ball overspeed sessions for bat speed development. Because the Xtender 24's extra height opens up more release-point variety, hitters can work against both belt-high and higher pitches without hitting the roof of the cage. With the machine off, the cage functions as an enclosed station for tee work, soft toss, and front-toss drills.\u003c\/p\u003e \u003ch2\u003eBaseHit \u0026amp; Xtender 24 Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePitching machine speed: up to 45 mph with real baseballs, up to 80 mph with lite balls\u003c\/li\u003e \u003cli\u003eAuto-feeder capacity: 12 baseballs, one ball every 10 seconds\u003c\/li\u003e \u003cli\u003eCage dimensions: 24 ft long, 12 ft wide, 10 ft tall\u003c\/li\u003e \u003cli\u003eCage net: 1.25-inch polyester\u003c\/li\u003e \u003cli\u003eCage frame: fiberglass-rod arch with tubular steel side supports\u003c\/li\u003e \u003cli\u003eGround anchors: six steel stakes\u003c\/li\u003e \u003cli\u003eStand: heavy-duty tubular steel tripod with pushpin legs\u003c\/li\u003e \u003cli\u003eRelease height: adjustable via height knob\u003c\/li\u003e \u003cli\u003ePower: 110V AC wall outlet\u003c\/li\u003e \u003cli\u003eAge range: 8 years through adult\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eBaseHit real-ball pitching machine\u003c\/li\u003e \u003cli\u003eOne polyurethane pitching machine baseball\u003c\/li\u003e \u003cli\u003e12-ball auto-feeder\u003c\/li\u003e \u003cli\u003eTubular steel tripod stand with pushpin legs\u003c\/li\u003e \u003cli\u003eBuilt-in machine harness\u003c\/li\u003e \u003cli\u003eXtender 24 home batting cage (net, fiberglass-rod arch, side supports, stakes)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAdditional pitching machine baseballs are sold separately. Plan for two or three dozen per session for continuous rounds. The package ships in boxes for home assembly with a printed manual and downloadable assembly instructions from the manufacturer site.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eHow is this different from the BaseHit \u0026amp; PowerAlley 22 package?\u003c\/h3\u003e \u003cp\u003eSame BaseHit pitching machine and same auto-feeder. The cage is two feet longer (24 ft vs 22 ft) and two feet taller (10 ft vs 8 ft). For older or taller hitters the Xtender 24 is usually the better choice. For smaller spaces or younger hitters, the PowerAlley 22 works well.\u003c\/p\u003e \u003ch3\u003eDoes the machine throw curveballs?\u003c\/h3\u003e \u003cp\u003eNo. The BaseHit is a fastball-only machine with variable speed control. For breaking pitches, look at higher-tier dual- or three-wheel machines. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003ch3\u003eIs the cage safe for indoor use?\u003c\/h3\u003e \u003cp\u003eYes, in spaces with at least 10 feet of overhead clearance. Large garages, barns, and converted outbuildings fit well. For finished basements, measure joist clearance first since the cage needs the full 10 feet of height.\u003c\/p\u003e \u003ch3\u003eHow long does assembly take?\u003c\/h3\u003e \u003cp\u003eMost first-time setups run one to two hours with two people. The pushpin stand legs snap together, the fiberglass arches flex into place through the net sleeve, and the six ground stakes anchor the frame. Printed instructions and an online assembly PDF cover the full process.\u003c\/p\u003e \u003ch3\u003eCan we use softballs?\u003c\/h3\u003e \u003cp\u003eYes. Lite softballs and 11-inch softballs fit the machine. Regulation 12-inch softballs are tight with a 6-inch wheel and are not the machine's design target, so lite or 11-inch is the better choice for softball practice.\u003c\/p\u003e \u003ch3\u003eWhat if a ball hits the machine?\u003c\/h3\u003e \u003cp\u003eThe cage's built-in harness and geometry are designed so pitched baseballs return into the net and do not strike the throwing head. The rugged composite housing on the machine also protects the mechanism from incidental hits.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079217979,"sku":"T04-BH499","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/basehit-xtender-24-htm-6.jpg?v=1781231819"},{"product_id":"blaze-combo-automatic-ball-feeder","title":"Blaze Combo Automatic Ball Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Blaze Combo Automatic Ball Feeder mounts to the Heater Sports Blaze Combo pitching machine so a single baseball or softball hitter can run a full session without a partner feeding. The feeder holds up to 16 baseballs or 12 softballs and drops one ball into the machine every four seconds, with adjustable spacers for switching between baseball and softball sizes. Plugs directly into the machine's AC outlet, no separate power source. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079250747,"sku":"T04-BBF79","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/blaze-combo-automatic-ball-feeder-htm-4.jpg?v=1781231820"},{"product_id":"blaze-combo-heavy-duty-pitching-machine-with-1-yr-warranty","title":"Blaze Combo Heavy Duty Pitching Machine With 1 Yr. Warranty","description":"\u003cdiv\u003e \u003cp\u003eThe Blaze Combo Heavy Duty Pitching Machine is a full-metal baseball and softball pitching machine built for programs, academies, and serious home hitters who need a machine that will hold up to daily team use. A 1\/4 horsepower heavy-duty motor drives speeds from 10 to 70 mph, and reversible metal legs flip between baseball release height and softball release height without tool-free tricks or workarounds. At 55 pounds the machine is still portable between a garage and a field, but the all-metal construction shrugs off the abuse a single-player home machine does not survive. A quick-slot ball-type adjustment lets the same machine throw lite baseballs, regulation baseballs, lite 11-inch softballs, regulation 11-inch softballs, lite 12-inch softballs, and regulation 12-inch softballs without swapping parts.\u003c\/p\u003e \u003ch2\u003eBaseball and Softball on One Machine\u003c\/h2\u003e \u003cp\u003eDual-sport households and coaches working across baseball and softball are the most common buyers of the Blaze Combo. The reversible leg sections flip so the machine sits at the correct release height for each sport, which matters because softball pitching is an underhand-style release and baseball is overhand-style. Getting the release height right changes whether the ball arrives at a realistic angle into the strike zone or lands at the wrong depth. Pair that with the quick-slot ball-type adjustment and the same machine handles a coed backyard or a club program where baseball and softball athletes share the same equipment.\u003c\/p\u003e \u003ch2\u003e90-Degree Pitch Angle Adjustment\u003c\/h2\u003e \u003cp\u003eThe Blaze Combo pivots across a full 90 degrees of pitch angle, which is the feature most relevant to coaches running mixed drills. The same machine throws grounders for infield work, line drives for outfielder tracking reads, strike-zone baseballs for hitters, pop flies for catchers practicing pop-ups, and high pop-ups for outfielders catching fly balls. That is five drill types with no machine swap, which is the difference between a team machine and a hitters-only home machine.\u003c\/p\u003e \u003ch2\u003e10 to 70 MPH Speed Range\u003c\/h2\u003e \u003cp\u003eSpeeds from 10 mph for beginners learning to track a pitched ball up to 70 mph for older hitters doing timing work cover every realistic training speed short of elite-level machines. A coach can drop the speed down for a tee-to-machine transition with a nine-year-old, leave it at 50 mph for most middle-school reps, and crank it to the high-60s for high-school hitters building timing against faster pitches. Speed is stable within a round rather than drifting, which is what makes machine batting practice better than human-thrown BP for detecting swing flaws.\u003c\/p\u003e \u003ch2\u003eHeavy-Duty 1\/4 HP Motor and All-Metal Construction\u003c\/h2\u003e \u003cp\u003eThe 1\/4 horsepower motor is the component that most determines whether a pitching machine lasts three seasons or ten. Smaller motors burn out under team-level daily use; the Blaze Combo's motor is built for that volume. The housing is all metal rather than composite plastic, which handles being loaded into a truck, dropped on a field, or set up by a teenager without cracking. Foul balls and incidental bat contact do not take pieces out of the machine the way they do with a composite-housing home unit. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003ch2\u003eWho This Blaze Combo Pitching Machine Is For\u003c\/h2\u003e \u003cp\u003eThe Blaze Combo Heavy Duty Pitching Machine fits travel-team programs that need one machine across a 12-player roster, high-school baseball and softball teams sharing equipment, private hitting instructors running lesson blocks, and serious home setups where one family trains multiple kids across both sports. It is overbuilt for a single-kid backyard (a BaseHit machine handles that use case at a lower price) and underpowered for college or pro training (which needs 90-plus mph machines). In the middle of that range (serious amateur, travel, high-school, private lessons) the Blaze Combo is in its element.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eOn the hitting side, the Blaze Combo handles straight batting practice, situational hitting (bunt, hit-and-run, two-strike), timing work at different speeds, opposite-field drills, and multi-round high-volume sessions. Each baseball session typically runs rounds of 10 to 15 swings with 30 to 60 seconds of rest between rounds. On the fielding side, the 90-degree angle adjustment lets the same machine throw infield grounders (low angle, 25 to 40 mph), outfield line drives (flat trajectory, 45 to 60 mph), and high pop-ups (steep angle, any speed). Catchers can practice blocking with the machine on a low angle bouncing balls short of the plate. For softball, swap the leg orientation and the ball chute and run the same drills for softball hitters and fielders.\u003c\/p\u003e \u003ch2\u003eSafety and Setup\u003c\/h2\u003e \u003cp\u003eThe all-metal safety ball chutes feed balls into the throwing head from above, which keeps a hand-fed session safer than machines where a person holds the ball near the wheel. For auto-fed sessions, the Blaze Combo Automatic Ball Feeder accessory drops balls every four seconds without a hand near the wheel. Setup is tool-free: the legs snap in, the ball chute seats on top, and the power cord plugs into a standard 110V outlet. Plan on a flat stable surface. The machine stays planted at 55 pounds but is not bolted down, so a heavy foul ball could nudge it on loose turf.\u003c\/p\u003e \u003ch2\u003eBlaze Combo Heavy Duty Pitching Machine Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eSpeed range: 10 to 70 mph\u003c\/li\u003e \u003cli\u003eMotor: 1\/4 HP heavy-duty electric\u003c\/li\u003e \u003cli\u003eWeight: 55 lbs\u003c\/li\u003e \u003cli\u003ePitch angle: adjustable across 90 degrees (grounder to pop-up)\u003c\/li\u003e \u003cli\u003eBall compatibility: lite baseballs, regulation baseballs, lite 11-inch softballs, regulation 11-inch softballs, lite 12-inch softballs, regulation 12-inch softballs\u003c\/li\u003e \u003cli\u003eSport orientation: reversible metal legs for baseball or softball release heights\u003c\/li\u003e \u003cli\u003eConstruction: all-metal housing and legs\u003c\/li\u003e \u003cli\u003ePower: 110V AC wall outlet\u003c\/li\u003e \u003cli\u003eBall delivery: manual hand-feed, or auto-feed with the Blaze Combo Automatic Ball Feeder accessory (sold separately)\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eBlaze Combo pitching machine with all-metal housing\u003c\/li\u003e \u003cli\u003eBaseball safety ball chute\u003c\/li\u003e \u003cli\u003e11-inch softball ball chute\u003c\/li\u003e \u003cli\u003e12-inch softball ball chute\u003c\/li\u003e \u003cli\u003eReversible metal leg sections\u003c\/li\u003e \u003cli\u003ePower cord\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe automatic ball feeder, baseballs, and softballs are sold separately. Most buyers add the matching Blaze Combo Automatic Ball Feeder for solo practice and at least two dozen pitching-machine baseballs so rounds run continuously.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eDoes the Blaze Combo throw curveballs?\u003c\/h3\u003e \u003cp\u003eNo. This is a single-wheel fastball machine with variable speed control and pitch-angle adjustment. For curveballs and breaking pitches, look at dual-wheel or three-wheel machines.\u003c\/p\u003e \u003ch3\u003eHow does it compare to the BaseHit pitching machine?\u003c\/h3\u003e \u003cp\u003eThe BaseHit is a composite-housing home machine at a lower price, good for single-kid backyard use up to about 45 mph on real baseballs. The Blaze Combo is built for team-level daily use with a heavier motor, all-metal construction, 70 mph top speed, pitch-angle adjustment for grounders and pop-ups, and baseball\/softball sport switching. If more than one kid or a team will use it, the Blaze Combo is the longer-lasting pick.\u003c\/p\u003e \u003ch3\u003eCan I use it for softball only?\u003c\/h3\u003e \u003cp\u003eYes. Flip the leg orientation, install the 11-inch or 12-inch softball ball chute, and the machine operates at softball release height for the full speed range. The same machine is a single-purchase solution for dual-sport programs or households.\u003c\/p\u003e \u003ch3\u003eIs 70 mph enough for high-school hitters?\u003c\/h3\u003e \u003cp\u003eFor timing work and tracking, yes. Most high-school hitters train against 60 to 75 mph pitches in practice, not the 85-plus velocities they see in games. For college-level and pro-level timing work, a higher-speed machine is a better fit.\u003c\/p\u003e \u003ch3\u003eHow loud is it?\u003c\/h3\u003e \u003cp\u003eThe 1\/4 HP motor runs louder than a typical home machine. Plan on about the volume of a small household shop vacuum. Outdoor team practices are unaffected, and indoor use in a gym or barn is fine. A finished basement is on the edge of comfortable depending on how much sound isolation the room has.\u003c\/p\u003e \u003ch3\u003eCan one person set it up?\u003c\/h3\u003e \u003cp\u003eYes. The machine is 55 pounds and the legs snap in without tools. Most adults can set it up solo in under five minutes. Moving it between locations is also a one-person lift.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079316283,"sku":"T04-BPM599C","price":699.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/blaze-combo-heavy-duty-pitching-machine-with-1-yr-warranty-htm-8.jpg?v=1781231820"},{"product_id":"bullseye-top-grain-leather-kevlar-seamed-pitching-machine-baseballs","title":"Bullseye Top Grain Leather Kevlar Seamed Pitching Machine Baseballs","description":"\u003cdiv\u003e \u003cp\u003eThe Bullseye Top Grain Leather Kevlar Seamed Pitching Machine Baseballs are the upgrade pick for families and programs that run a real-ball pitching machine daily and want baseballs that survive months of use rather than weeks. The top-grain leather cover handles repeated impact through a machine wheel without splitting at the seam, and the Kevlar stitching holds tension where standard polyester thread frays and unravels. Sold in packs of one dozen, these baseballs are sized and weighted to regulation and are the preferred baseball for Heater Real Single and Dual Wheel machines including the Deuce 79 and Deuce 95.\u003c\/p\u003e \u003ch2\u003eTop-Grain Leather, Not Synthetic\u003c\/h2\u003e \u003cp\u003eMost pitching machine baseballs are synthetic-covered or use a thin leather skin over a rubber core. The Bullseye's top-grain leather is the same construction tier as a regulation game baseball, which matters for two reasons. First, the ball flight looks and feels like a real baseball rather than the slightly-hollow bounce of a synthetic, so hitters train against a realistic ball. Second, the leather holds its shape through thousands of wheel passes before it starts to scuff, which is the failure mode that makes most machine baseballs skip in the chute and throw inconsistently.\u003c\/p\u003e \u003ch2\u003eKevlar Seams for Longer Life\u003c\/h2\u003e \u003cp\u003eThe seam is where machine baseballs typically fail first. A standard baseball's thread gets squeezed between the spinning wheel and the ball at release, which chews up polyester thread over time. Kevlar's tensile strength is several times higher than polyester, so the seam keeps its integrity long after a normal baseball's thread would pull through. The low-profile seam height also helps the ball ride the wheel smoothly rather than catching on each seam pass, which gives the pitching machine more consistent release speed and direction.\u003c\/p\u003e \u003ch2\u003eBuilt for Real-Ball Pitching Machines\u003c\/h2\u003e \u003cp\u003eSingle-wheel and dual-wheel real-baseball machines are the target use case. The ball is regulation-weighted and regulation-sized, so the machine launches it at the same speed the manufacturer specs for leather baseballs rather than the reduced speed some lite-ball or undersized balls produce. For Heater Deuce 79 and Deuce 95 dual-wheel machines, these are the preferred ball because dual-wheel release is harder on ball seams than single-wheel and benefits most from the Kevlar stitching.\u003c\/p\u003e \u003ch2\u003eWho This Baseball Is For\u003c\/h2\u003e \u003cp\u003ePrograms and families running daily or near-daily batting practice with a real-ball pitching machine get the most value from these baseballs. Travel teams, high-school baseball programs, private hitting instructors, and serious home setups with a Heater dual-wheel machine are the main buyers. For a weekend backyard setup that runs a few sessions a month, standard pitching-machine baseballs are adequate and less expensive. The Bullseye baseballs earn their higher price when usage volume is high enough that regular balls would need replacing every few weeks. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eAny use case a regulation baseball supports, these support with longer lifespan. That covers standard batting practice, situational hitting, timing work, front-toss replacement (the baseballs are identical in feel to game baseballs for drills hit by hand), and controlled soft-toss sessions when the machine is off. Because the balls are regulation-weighted, they also work for long-toss arm maintenance and catch with the caveat that most programs reserve game baseballs for actual games and use these for machine work.\u003c\/p\u003e \u003ch2\u003eBullseye Top Grain Leather Kevlar Pitching Machine Baseballs Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePack quantity: 1 dozen (12 baseballs)\u003c\/li\u003e \u003cli\u003eCover: top-grain genuine leather\u003c\/li\u003e \u003cli\u003eSeam thread: Kevlar\u003c\/li\u003e \u003cli\u003eSeam profile: low-profile for improved machine accuracy\u003c\/li\u003e \u003cli\u003eWeight and size: regulation baseball\u003c\/li\u003e \u003cli\u003eRecommended machine compatibility: Heater real single-wheel and dual-wheel baseball machines (including Deuce 79 and Deuce 95)\u003c\/li\u003e \u003cli\u003eRecommended ages: 8 years through adult\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eHow long do these last compared to standard machine baseballs?\u003c\/h3\u003e \u003cp\u003eIn daily team use, program buyers typically report two to three times the lifespan of standard synthetic-covered machine baseballs before seam failure. Exact longevity depends on pitch volume per session, ball rotation across the dozen (rotating balls across a session spreads wear), and whether the balls see any game or field use in addition to machine use.\u003c\/p\u003e \u003ch3\u003eCan I use these in a three-wheel machine or a non-Heater machine?\u003c\/h3\u003e \u003cp\u003eYes, any real-ball single or multi-wheel pitching machine that launches regulation baseballs is compatible. The Heater Deuce-series compatibility note reflects the manufacturer's own testing; third-party real-ball machines work as long as they accept a standard-weight, low-seam baseball.\u003c\/p\u003e \u003ch3\u003eWhy are they more expensive than other pitching machine baseballs?\u003c\/h3\u003e \u003cp\u003eThe top-grain leather cover and Kevlar seam thread cost more to source and construct than synthetic-covered machine baseballs. The per-session cost is typically lower because each ball lasts longer, which is the math that makes them attractive for high-volume programs. For light use, standard machine baseballs may be the better value.\u003c\/p\u003e \u003ch3\u003eAre these the same as regulation game baseballs?\u003c\/h3\u003e \u003cp\u003eConstruction is similar (top-grain leather, cork-and-rubber core, regulation size and weight), but the seam profile is lowered specifically for pitching machine use. That makes them track better through a machine wheel but slightly less visually prominent than a game baseball's raised seam. For game play you would still use a regulation game baseball.\u003c\/p\u003e \u003ch3\u003eCan I use them for soft-toss and front-toss?\u003c\/h3\u003e \u003cp\u003eYes. Regulation weight and size means they behave like a normal baseball for hand-thrown drills. Most programs reserve these for machine use and use older game baseballs for toss work to save wear.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079414587,"sku":"T04-PMBL44_TOP_GRAIN","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/bullseye-top-grain-leather-kevlar-seamed-pitching-machine-baseballs-htm-2.jpg?v=1781231820"},{"product_id":"crusher-fast-mini-poly-balls","title":"Crusher Fast Mini Poly-Balls","description":"\u003cdiv\u003e \u003cp\u003eCrusher Fast Mini Poly-Balls are golf-ball-sized polyester baseballs designed for the Heater Crusher Mini-Ball pitching machine, giving younger hitters a smaller target that sharpens hand-eye coordination and tracking skills. Twelve balls per pack, lightweight, and safe for indoor or outdoor use in garages, basements, or small backyards. A good fit for baseball hitters ages six and up building contact quality before moving to full-size baseballs. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: only 1 validated image found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079611195,"sku":"T04-CR11","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/crusher-fast-mini-poly-balls-htm-1.jpg?v=1781231820"},{"product_id":"heater-combo-auto-ball-feeder","title":"Heater Combo Auto-Ball Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Combo Auto-Ball Feeder turns the Heater Real Ball Combo Machine into an automatic pitcher, so a single baseball or softball hitter can run a full round of batting practice without anyone feeding balls. The heavy-duty steel frame holds 12 baseballs or 9 softballs and drops one ball every 9 seconds, plugging directly into the motor end cap of the Heater Combo machine (model HTR599NBF). Designed for solo training, small-group rotations, and dual-sport households running the same machine for baseball and softball hitters. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079742267,"sku":"T04-HTR599BF","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-combo-auto-ball-feeder-htm-1.jpg?v=1781231820"},{"product_id":"heater-pitching-machine-baseballs","title":"Heater Pitching Machine Baseballs","description":"\u003cdiv\u003e \u003cp\u003eHeater Pitching Machine Baseballs are optic-yellow dimpled polyurethane baseballs sized and weighted for Heater real-ball pitching machines and for consistent daily batting practice. The dimpled surface helps the ball track true through a single-wheel throwing head, and the regulation weight keeps pitch speed and flight similar to a standard baseball so hitters do not have to recalibrate their timing. Sold one dozen per pack, recommended for ages 8 through adult. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: only 1 validated image found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079775035,"sku":"T04-PMB29","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-pitching-machine-baseballs-htm-1.jpg?v=1781231820"},{"product_id":"heater-pitching-machine-cover-with-built-in-sleeve","title":"Heater Pitching Machine Cover With Built-In Sleeve","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Pitching Machine Cover with Built-In Sleeve is a water-resistant nylon cover sized for Heater baseball and softball pitching machines that use a metal ball feeder, with an extended sleeve that wraps the feeder so the full assembly stays protected between sessions. A drawstring cinch tie holds the cover in place against wind and accidental bumps during outdoor storage or transport. One-size-fits-all design works across current Heater machines with attached metal ball feeders. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079807803,"sku":"T04-MC2999","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-pitching-machine-cover-with-built-in-sleeve-htm-1.jpg?v=1781231820"},{"product_id":"heater-pitching-machine-cover-with-no-sleeve","title":"Heater Pitching Machine Cover With No Sleeve","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Pitching Machine Cover with No Sleeve is a heavy-duty water-resistant nylon cover sized for Heater baseball and softball pitching machines that do not use an attached metal ball feeder. A drawstring cinch tie locks the cover in place against wind and accidental bumps during outdoor storage or transport between sessions. One-size-fits-all fit across current Heater machines keeps the mechanism free of dust, moisture, and debris. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334079840571,"sku":"T04-MC2499","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-pitching-machine-cover-with-no-sleeve-htm-5.jpg?v=1781231820"},{"product_id":"heater-pro-auto-ball-feeder","title":"Heater Pro Auto Ball Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Pro Auto Ball Feeder attaches to the Heater Pro Curve Pitching Machine and drops one baseball into the throwing head every 9 seconds, turning a two-person batting practice session into a solo one. Heavy-duty steel frame holds up to 12 baseballs per load and plugs directly into the motor end cap of the Pro Curve, so there is no separate power source to manage at the field. Quick attachment to the ball chute means a coach can set it up, run a round, and break it down in minutes. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: only 1 validated image found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334080069947,"sku":"T04-HTR499BBBF","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-pro-auto-ball-feeder-htm-1.jpg?v=1781231820"},{"product_id":"heater-real-baseball-auto-ball-feeder","title":"Heater Real Baseball Auto Ball Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Real Baseball Auto Ball Feeder attaches to the Heater Heavy Duty Baseball Pitching Machine and drops one baseball into the throwing head every 9 seconds, converting a two-person practice setup into a solo session for a hitter working alone in the backyard or at the field. Heavy-duty steel frame holds 12 baseballs per load and plugs directly into the motor end cap of the Heavy Duty machine, so no separate power source is needed. Recommended for ages 8 through adult. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: only 1 validated image found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334080135483,"sku":"T04-HTR6000BBCBF","price":178.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-real-baseball-auto-ball-feeder-htm-1.jpg?v=1781231820"},{"product_id":"heater-softball-auto-ball-feeder","title":"Heater Softball Auto-Ball Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Softball Auto-Ball Feeder attaches to the Heater Heavy Duty 12-inch Softball Pitching Machine and drops one softball into the throwing head every 9 seconds so a softball hitter can run a full practice round without a coach feeding. Heavy-duty steel frame holds 9 softballs per load and plugs directly into the motor end cap of the softball machine, with no separate power source to manage at the field. Quick-attach design keeps setup and teardown under five minutes. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: only 1 validated image found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334080168251,"sku":"T04-HTR6000SBBF","price":159.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/heater-softball-auto-ball-feeder-htm-1.jpg?v=1781231820"},{"product_id":"hitting-station-1-batting-tee-net","title":"Hitting Station#1 Batting Tee \u0026 Net","description":"\u003cdiv\u003e \u003cp\u003eThe Heater Hitting Station #1 is a 3-in-1 setup that combines a 6 ft by 8 ft stake-in-grass polyester net with a spring-away adjustable batting tee, giving baseball and softball hitters a pitching target, a backstop, and a tee station in one package. The fiberglass arch frame flexes with repeated ball impact instead of bending, and the reversible tee top handles mini lite-balls, lite-balls, regulation baseballs, and softballs with a stem adjustable from 24 to 36 inches. Recommended for ages 4 through adult. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334080201019,"sku":"T04-HS4999","price":59.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/hitting-station-1-batting-tee-net-htm-7.jpg?v=1781231820"},{"product_id":"hot-box-1200-peak-portable-power-station","title":"Hot Box 1200 Peak Portable Power Station","description":"\u003cdiv\u003e \u003cp\u003eThe Hot Box 1200 Peak Portable Power Station runs Heater baseball and softball pitching machines at fields or travel locations without access to a wall outlet, with a 600-watt continuous output and 1200-watt peak backed by a 120 amp-hour battery. Dual AC outlets power the machine plus a phone charger or tablet, and a digital display shows remaining battery life at a glance. Weighs 12 pounds, measures 11 by 9 by 7 inches, and recharges in about 8 hours from the included adapter. Runs the BaseHit machine and Power Alley 360 Lite for roughly 3 hours per charge, or the Heavy Duty and Blaze Combo machines for about 1.5 hours. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334080233787,"sku":"T04-HS1200","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/hot-box-1200-peak-portable-power-station-htm-1.jpg?v=1781231820"},{"product_id":"hot-box-240-portable-power-station","title":"Hot Box 240 Portable Power Station","description":"\u003cdiv\u003e \u003cp\u003eThe Hot Box 240 Portable Power Station runs Heater lite-ball baseball and softball pitching machines at fields or travel locations without a wall outlet, with a 150-watt inverter (225-watt peak) and a 24 amp-hour battery. The compact 9 by 6 by 2-inch, 4-pound unit attaches directly to a pitching machine tripod and delivers about 1.5 hours of continuous power per charge on the BaseHit, Power Alley 360 Lite, Slider 360 Lite, Power Alley Pro, and Power Alley 360 12-inch softball machines. Dual AC outlets and a digital LCD display round out the unit. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334080299323,"sku":"T04-HS240","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/hot-box-240-portable-power-station-htm-7.jpg?v=1781231821"},{"product_id":"hot-box-400-portable-power-station","title":"Hot Box 400 Portable Power Station","description":"\u003cdiv\u003e \u003cp\u003eThe Hot Box 400 Portable Power Station runs Heater lite-ball baseball and softball pitching machines at fields or travel locations without a wall outlet, with a 150-watt inverter (225-watt peak) and a 40 amp-hour battery for about 2.5 hours of continuous run time. The 9 by 6 by 2-inch, 4-pound unit attaches directly to a pitching machine tripod and powers the BaseHit, Power Alley 360 Lite, Slider 360 Lite, Power Alley Pro, and Power Alley 360 12-inch softball machines. Dual AC outlets, a digital LCD display, and a 5-hour recharge from the included adapter complete the package. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334081249595,"sku":"T04-HS400","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/hot-box-400-portable-power-station-htm-7.jpg?v=1781231821"},{"product_id":"hot-box-600-peak-portable-power-station","title":"Hot Box 600 Peak Portable Power Station","description":"\u003cdiv\u003e \u003cp\u003eThe Hot Box 600 Peak Portable Power Station runs Heater baseball and softball pitching machines at fields or travel locations with a 300-watt continuous \/ 600-watt peak inverter and a 60 amp-hour battery. The 9 by 9 by 4-inch, 6-pound unit powers the BaseHit, Power Alley 360 Lite, Slider 360 Lite, Power Alley Pro, and Power Alley 360 12-inch softball machines for about 4 hours per charge, and the Heavy Duty, Pro Curveball, and 12-inch softball machines for about 2 hours. Dual AC outlets, a digital LCD display, and a foldable carrying handle make it easy to move between car, field, and backyard. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334081282363,"sku":"T04-HS600","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/hot-box-600-peak-portable-power-station-htm-7.jpg?v=1781231901"},{"product_id":"leather-pitching-machine-baseballs","title":"Leather Pitching Machine Baseballs","description":"\u003cdiv\u003e \u003cp\u003eHeater Leather Pitching Machine Baseballs are genuine-leather, Kevlar-seamed baseballs built for Heater single-wheel baseball pitching machines that need a regulation-weight ball with low-profile seams for consistent accuracy. The leather cover handles daily machine use longer than synthetic covers, and the Kevlar stitching holds seam tension where standard polyester thread frays. Sold one dozen per pack, recommended for ages 8 through adult. For dual-wheel Deuce machines, the Fireball leather baseballs are the better match. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: only 2 validated images found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334081315131,"sku":"T04-PMBL44","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/leather-pitching-machine-baseballs-htm-2.jpg?v=1781231901"},{"product_id":"nice-shot-stake-in-grass-net","title":"Nice Shot Stake In Grass Net","description":"\u003cdiv\u003e \u003cp\u003eThe Nice Shot Stake In Grass Net is a backyard golf practice net that stakes directly into the lawn for quick setup and catches golf shots at full swing speed. A fit for golfers working on drives, irons, and short-game shots in a yard or open field without building a permanent practice cage. Packs down for storage between sessions. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: sport mismatch, supplier labels this as golf, no baseball\/softball framing possible --\u003e \u003c!-- FLAG: category uncertain, golf product in a baseball\/softball catalog, manual review --\u003e \u003c!-- FLAG: only 1 validated image found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334081478971,"sku":"T04-NT2999","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/nice-shot-stake-in-grass-net-htm-1.jpg?v=1781231901"},{"product_id":"perfect-pitch-50-mechanical-combo-machine","title":"Perfect Pitch 50 Mechanical Combo Machine","description":"\u003cdiv\u003e \u003cp\u003eThe Perfect Pitch 50 Mechanical Combo Machine is a spring-powered baseball and softball pitching machine that throws strikes, grounders, and fly balls without batteries or an electric outlet, which makes it the Heater machine to grab when the power drops out, when you are training in the middle of a field, or when you do not want to manage a cord at a Little League practice. The 12-pound frame is the lightest 50 mph mechanical machine on the market, which means one coach or one parent can load it into the trunk, set it up on a grass field in two minutes, and run a full round of swings without a power source. The machine pitches 9-inch baseballs up to 50 mph, 11-inch and 12-inch softballs, plus lite balls up to 60 mph and lite softballs up to 55 mph, giving one frame the range most amateur hitters train against.\u003c\/p\u003e \u003ch2\u003eSpring-Powered, No Batteries or Electricity\u003c\/h2\u003e \u003cp\u003eThe Perfect Pitch 50 uses a heavy-duty spring and a foot pedal to launch each ball, so the machine has no motor, no battery, and no power cord. Step on the pedal to cock the arm, place the ball in the cradle, then release the pedal and the spring drives the arm through the pitch. That mechanical-only design is why the machine is so popular for remote fields, youth practices without field power, and parents who want a backyard machine that starts instantly and cannot be left on overnight to drain a battery.\u003c\/p\u003e \u003ch2\u003e10 to 50 MPH Real Baseball Speeds\u003c\/h2\u003e \u003cp\u003eVariable speed lets a coach drop the pitch down to 10 mph for a young hitter learning to track a pitched ball, hold at 35 to 40 mph for standard middle-school baseball rounds, or crank it to 50 mph for older kids and softball players doing timing work. Lite balls extend the range: 60 mph with lite baseballs and 55 mph with lite softballs for hitters who want faster-looking flight without the real-ball velocity. The speed adjustment is stable within a round, so rep-over-rep timing is consistent.\u003c\/p\u003e \u003ch2\u003eBaseball and Softball on One Frame\u003c\/h2\u003e \u003cp\u003eThe Perfect Pitch 50 accepts 9-inch baseballs, 11-inch softballs, and 12-inch softballs without swapping throwing components. A height-adjustment tab on the throwing arm and a strike-zone adjustment knob fine-tune release point and location so you can mix high, low, inside, and outside pitches in the same session. Coaches running dual-sport practices (coed youth leagues, middle-school teams sharing equipment, siblings at home) get both sports from a single purchase, which is the feature most often cited when families shop at this price point. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003ch2\u003eGrounders, Strikes, and Fly Balls\u003c\/h2\u003e \u003cp\u003eAdjusting the height tab changes the launch angle so the same machine delivers ground balls for infield practice, line drives and strike-zone pitches for hitters, and high fly balls for outfielders tracking reads. That is three training modes from one machine with no additional equipment. A youth team can run a 30-minute station rotation (fielding, hitting, pop-ups) on a single Perfect Pitch 50 without buying a dedicated fielding machine.\u003c\/p\u003e \u003ch2\u003eWho This Baseball and Softball Machine Is For\u003c\/h2\u003e \u003cp\u003eThe Perfect Pitch 50 fits youth baseball and softball coaches, parents running backyard practices without a power outlet, travel-team assistant coaches carrying equipment between fields, physical-education teachers running indoor or outdoor hitting stations, and home users who want a simple, indestructible machine that will not die when a battery fails. It is underpowered for high-school competitive timing work (where 65 to 80 mph is typical), but for Little League, coach-pitch leagues, fall-ball practice, and early-season conditioning it covers the speed range cleanly.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eOn the hitting side, common session patterns include rounds of 10 to 15 swings at a fixed speed, speed-ladder rounds (30 mph, 35 mph, 40 mph to build timing), and opposite-field drills at a flat angle. For fielding, set the machine to a low angle and 25 to 35 mph for infield grounders, raise the angle for line-drive outfield reads, or max the angle for high pop-ups to catchers and outfielders. Softball teams swap ball size only, not configuration, and run the same drill set. For indoor winter practice, set the machine inside a netted cage or gym with 10 feet of overhead clearance.\u003c\/p\u003e \u003ch2\u003eSetup and Portability\u003c\/h2\u003e \u003cp\u003eAt 12 pounds the Perfect Pitch 50 is the lightest 50 mph mechanical machine you can buy, which matters when the job is loading the trunk on a Saturday morning. The frame folds for storage, and the included steel ground stakes lock the front legs into grass or dirt for additional stability. Most first-time setups run under five minutes: unfold the frame, stake the legs, adjust the height tab, and start feeding. Indoor use works on gym floors with the stakes left off as long as the surface is flat and the machine is placed on a non-slip mat.\u003c\/p\u003e \u003ch2\u003ePerfect Pitch 50 Mechanical Combo Machine Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eSpeed range: 10 to 50 mph with real baseballs, up to 60 mph with lite baseballs\u003c\/li\u003e \u003cli\u003eSoftball speed: up to 45 mph with real softballs, up to 55 mph with lite softballs\u003c\/li\u003e \u003cli\u003eWeight: 12 lbs\u003c\/li\u003e \u003cli\u003eMechanism: heavy-duty spring, foot-pedal activated\u003c\/li\u003e \u003cli\u003eBall compatibility: 9-inch baseballs, 11-inch softballs, 12-inch softballs, plus lite balls and lacrosse and tennis balls\u003c\/li\u003e \u003cli\u003ePitch types: grounders, strikes, fly balls via height-tab adjustment\u003c\/li\u003e \u003cli\u003eStrike-zone adjustment: fine-tuning knob on throwing arm\u003c\/li\u003e \u003cli\u003ePower source: none required (mechanical spring)\u003c\/li\u003e \u003cli\u003eStability: included steel ground stakes for front legs\u003c\/li\u003e \u003cli\u003eAge range: 4 years through adult\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePerfect Pitch 50 mechanical pitching machine with foldable frame\u003c\/li\u003e \u003cli\u003eSteel ground stakes for front legs\u003c\/li\u003e \u003cli\u003eHeight-adjustment tab and strike-zone knob pre-installed\u003c\/li\u003e \u003cli\u003ePrinted instruction manual\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBaseballs and softballs are sold separately. Most coaches add a dozen pitching-machine baseballs and a dozen softballs for full dual-sport sessions.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eDoes this machine throw curveballs?\u003c\/h3\u003e \u003cp\u003eNo. The Perfect Pitch 50 is a fastball-only mechanical machine with variable speed and adjustable release height. For breaking pitches, look at multi-wheel electric machines.\u003c\/p\u003e \u003ch3\u003eHow is this different from an electric pitching machine?\u003c\/h3\u003e \u003cp\u003eSpring-powered machines need no power source, weigh less, cost less, and operate anywhere you can stake the legs into the ground. Electric machines throw faster, offer auto-feed options, and produce more consistent pitch-to-pitch speed. For youth practice without field power, the Perfect Pitch 50 is the better fit. For high-school timing work or solo batting practice with an auto-feeder, an electric machine is the better pick.\u003c\/p\u003e \u003ch3\u003eCan one person operate it during a drill?\u003c\/h3\u003e \u003cp\u003eYes. A coach steps on the pedal, loads the ball into the cradle, releases the pedal, and the spring launches the pitch. With a ball caddy set next to the machine, a solo operator can run a full round of swings without breaking rhythm.\u003c\/p\u003e \u003ch3\u003eDoes it work indoors?\u003c\/h3\u003e \u003cp\u003eYes, on a flat gym or barn floor with at least 8 feet of overhead clearance. The stakes are not required indoors as long as the machine sits on a non-slip surface.\u003c\/p\u003e \u003ch3\u003eWhat age is this machine for?\u003c\/h3\u003e \u003cp\u003eManufacturer age range is 4 through adult. Younger hitters use the lower speed settings with lite balls; older kids and adult softball players use the higher settings.\u003c\/p\u003e \u003ch3\u003eCan it throw lacrosse or tennis balls?\u003c\/h3\u003e \u003cp\u003eYes. The cradle and throwing arm accept lacrosse and tennis balls in addition to baseballs and softballs, which makes the same machine useful for multi-sport coaches.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334081708347,"sku":"T04-PP149","price":139.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/perfect-pitch-50-mechanical-combo-machine-htm-8.jpg?v=1781231901"},{"product_id":"perfect-swing-home-driving-range","title":"Perfect Swing Home Driving Range","description":"\u003cdiv\u003e \u003cp\u003eThe Perfect Swing Home Driving Range is a complete backyard golf practice package that combines a 7\/8-inch tubular steel frame, a 7.5 ft by 9 ft all-weather catch net, an automatic golf ball teeing machine, a golf ball loader with shag bag, and a Power Stroke simulated-grass driving mat. The angled frame design deflects golf balls away from the golfer for safe play, the teeing machine continually tees balls so the golfer does not bend over between shots, and the mat provides the feel and protection of hitting from real fairway. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: sport mismatch, supplier labels this as golf, no baseball\/softball framing possible --\u003e \u003c!-- FLAG: category uncertain, golf product in a baseball\/softball catalog, manual review --\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334082134331,"sku":"T04-HDR9999","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/perfect-swing-home-driving-range-htm-4.jpg?v=1781231901"},{"product_id":"perfect-swing-stand-alone-net","title":"Perfect Swing Stand Alone Net","description":"\u003cdiv\u003e \u003cp\u003eThe Perfect Swing Stand Alone Net is a freestanding backyard golf practice net built to catch shots at full swing speed, from drives down to irons and chip-work. The stand-alone frame sets up without staking into the ground, so a golfer can use it on a driveway, patio, garage, or any flat surface where a staked net would not work. Compatible with Heater foam and rubber golf hitting mats and shag bag accessories for a complete home practice setup. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: sport mismatch, supplier labels this as golf, no baseball\/softball framing possible --\u003e \u003c!-- FLAG: category uncertain, golf product in a baseball\/softball catalog, manual review --\u003e \u003c!-- FLAG: only 1 validated image found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC input value was display-corrupted (scientific notation), cleared for re-supply --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334082429243,"sku":"T04-PS4999","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/perfect-swing-stand-alone-net-htm-1.jpg?v=1781231901"},{"product_id":"perfect-swing-teeing-machine","title":"Perfect Swing Teeing Machine","description":"\u003cdiv\u003e \u003cp\u003eThe Perfect Swing Teeing Machine is an automatic golf ball tee-up machine that re-tees each ball after a swing, so golfers can run continuous practice sessions without bending down to reset between reps. It pairs with a home driving range net setup or stand-alone net for backyard, garage, or indoor swing work, and lets players focus on swing mechanics and timing instead of on resetting the ball. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: sport mismatch - supplier labels this as golf, no baseball\/softball framing possible --\u003e \u003c!-- FLAG: category uncertain, golf product in a baseball\/softball catalog, manual review --\u003e \u003c!-- FLAG: only 1 validated image found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC cleared due to Excel scientific-notation corruption in input --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334082658619,"sku":"T04-TM2999","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/perfect-swing-teeing-machine-htm-1.jpg?v=1781231901"},{"product_id":"power-alley-12-ball-automatic-baseball-feeder","title":"Power Alley 12 Ball Automatic Baseball Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Power Alley 12 Ball Automatic Baseball Feeder converts a PowerAlley Lite or PowerAlley Pro pitching machine into a solo baseball hitting station, so a single player can run batting practice without a partner feeding the machine. It holds up to 12 baseballs and drops one pitch every 9 seconds, with a quick-attach connection to the ball chute and a direct plug into the machine's AC outlet for power. Compact and lightweight for backyard, cage, or travel use. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC cleared due to Excel scientific-notation corruption in input --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334083281211,"sku":"T04-PA49B","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/power-alley-12-ball-automatic-baseball-feeder-htm-1.jpg?v=1781231901"},{"product_id":"power-alley-12-inch-lite-softballs-1-dozen","title":"Power Alley 12 inch Lite Softballs(1 Dozen)","description":"\u003cdiv\u003e \u003cp\u003ePower Alley 12 inch Lite Softballs come one dozen per pack and are matched to Heater Lite softball, softball, and combo pitching machines. Each softball is molded from durable polyurethane at regulation 12-inch diameter but runs about one-quarter the weight of a regulation softball, which lets hitters train at higher pitch speeds safely and keeps wear on the machine's wheel low. Well suited for fastpitch timing work and pop-up or pop-fly drills in backyards and team cages. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: only 1 validated image found, below 3-image threshold --\u003e \u003c!-- FLAG: UPC cleared due to Excel scientific-notation corruption in input --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334083510587,"sku":"T04-HSW14SB-12","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/power-alley-12-inch-lite-softballs-1-dozen-htm-1.jpg?v=1781231901"},{"product_id":"power-alley-360-12-inch-softball-automatic-feeder","title":"Power Alley 360 12 Inch Softball Automatic Feeder","description":"\u003cdiv\u003e \u003cp\u003eThe Power Alley 360 12 Inch Softball Automatic Feeder attaches to the PowerAlley Lite 360 12 inch softball pitching machine and turns it into a solo fastpitch training station. It holds up to 12 lite 12-inch softballs and drops one pitch every 4 seconds, which is fast enough for continuous round work without a partner feeding the machine. The feeder is compact and lightweight with a quick-attach connection to the ball chute and plugs directly into the machine's AC outlet for power. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: supplier page serves shared image BBF79-02.jpg; only 1 validated image --\u003e \u003c!-- FLAG: UPC cleared due to Excel scientific-notation corruption in input --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334083674427,"sku":"T04-PA49SB","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/power-alley-360-12-inch-softball-automatic-feeder-htm-1.jpg?v=1781231901"},{"product_id":"power-alley-360-lite-baseball-pitching-fielding-machine","title":"Power Alley 360 Lite Baseball Pitching \u0026 Fielding Machine","description":"\u003cdiv\u003e \u003cp\u003eThe Power Alley 360 Lite Baseball Pitching and Fielding Machine is a two-in-one training unit that throws lite-weight baseballs for batting practice and pivots on a swivel head to launch grounders, line drives, and pop flies up to 200 feet for defensive work. The 1\/8 horsepower electric motor drives ball speeds from 40 mph up to 80 mph depending on ball type and distance, and the full 360-degree pitch head lets a single machine cover fastballs, sliders, curveballs, and fielding trajectories without moving the unit. Recommended for ages 8 through adult, the Power Alley 360 is designed for families and small teams that want one affordable machine to cover both sides of baseball practice.\u003c\/p\u003e \u003ch2\u003ePitching Machine and Fielding Trainer in One\u003c\/h2\u003e \u003cp\u003eMost home pitching machines do one job. The Power Alley 360 does two. With the throwing head tilted flat and rotated to face a hitter, the machine pitches lite baseballs at 40 to 80 mph for batting practice. Rotate the head up and pivot it, and the same machine launches grounders to an infielder, line drives to an outfielder, or pop flies for catchers and corner outfielders working on tracking reads. For a single-kid backyard or a small team running a shared practice, the dual-purpose design eliminates the need to buy separate batting and fielding setups.\u003c\/p\u003e \u003ch2\u003e360-Degree Swivel Throwing Head\u003c\/h2\u003e \u003cp\u003eThe swivel mechanism is the feature most buyers cite after using the machine for a season. It pivots a full 360 degrees, which lets a coach or parent change pitch type in seconds: fastball straight in, slider with the head angled one way, curveball with the head angled the other way. Hitters see different pitch shapes within the same round, which is closer to what they actually face in games than the flat-fastball-only delivery of simpler single-wheel machines. On the fielding side, the same swivel sends grounders left or right of a defender, or throws fly balls to different field positions without dragging the machine around.\u003c\/p\u003e \u003ch2\u003eVariable Speed from 40 to 80 MPH\u003c\/h2\u003e \u003cp\u003eSpeed varies with ball type. Lite baseballs launch faster than real baseballs because the wheel spins them up more efficiently. Coaches can train a nine-year-old against low-speed deliveries for tracking practice, then crank the machine to 70 or 80 mph for an older sibling working on bat speed and timing. Because the ball is lite-weight at roughly half the mass of a regulation baseball, the higher speeds are still safe in a home backyard or cage, where a real-ball 80 mph pitch would be a hazard. The lite-ball design is why families and youth programs buy this machine instead of a heavy real-ball unit.\u003c\/p\u003e \u003ch2\u003eFully Enclosed Safety Wheel\u003c\/h2\u003e \u003cp\u003eThe throwing wheel is fully enclosed inside a solid housing, which protects fingers during loading and keeps balls from being ejected at odd angles if a ball enters the head off-center. For youth practice, the enclosed-wheel design is the baseline safety feature a coach or parent should look for. The machine also includes a built-in circuit breaker for electrical protection during continuous use.\u003c\/p\u003e \u003ch2\u003eDurable Construction and Portability\u003c\/h2\u003e \u003cp\u003eThe Power Alley 360 uses a tubular steel leg assembly with rubber tips for stability on turf, grass, or concrete, and a durable housing over the motor and wheel. It runs off a standard 110-volt AC wall outlet, and a separately sold battery pack makes the machine portable to fields without power. The unit is light enough for one adult to carry out to the backyard and set up in a few minutes. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003ch2\u003eWho This Baseball Machine Is For\u003c\/h2\u003e \u003cp\u003eThe Power Alley 360 Lite fits families with one to three baseball players sharing the machine, small youth teams running stations during practice, and coaches running backyard lessons for travel-team hitters. The 40-to-80 mph speed range covers age ranges from roughly 8 years up through early high school. For older high-school hitters who need regular baseball weight and 70 mph-plus real-ball timing work, the Power Alley Pro real-baseball machine is a better fit. For single-sport softball households, the PASOFT199_360 softball version is the match.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eOn the hitting side the machine supports straight batting practice rounds, situational hitting drills such as bunting, hit-and-run, and two-strike swings, timing work across different speeds, and soft-toss replacement when the machine is off. On the fielding side the 360-degree head launches grounders for middle-infielder footwork drills, line drives for outfield routes and reads, and pop flies for catchers and corner players working on tracking fly balls. One 30-minute practice can cycle through hitting rounds, then pivot the head for a defensive block without leaving the backyard.\u003c\/p\u003e \u003ch2\u003ePower Alley 360 Lite Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePitch speed: 40 mph to 80 mph, varies by ball type and distance\u003c\/li\u003e \u003cli\u003eBall compatibility: lite baseballs (regulation-size, reduced weight)\u003c\/li\u003e \u003cli\u003ePitch types: fastball, slider, curveball via swivel head orientation\u003c\/li\u003e \u003cli\u003eFielding range: up to 200 feet for grounders, line drives, and pop flies\u003c\/li\u003e \u003cli\u003ePitch head: 360-degree swivel\u003c\/li\u003e \u003cli\u003eMotor: 1\/8 HP AC electric\u003c\/li\u003e \u003cli\u003ePower: standard 110V AC wall outlet or optional battery pack (sold separately)\u003c\/li\u003e \u003cli\u003eSafety: fully enclosed throwing wheel, built-in circuit breaker\u003c\/li\u003e \u003cli\u003eConstruction: tubular steel legs with rubber tips, durable housing\u003c\/li\u003e \u003cli\u003ePitch height: adjustable for grounders and fly balls\u003c\/li\u003e \u003cli\u003eRecommended age: 8 years to adult\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePower Alley 360 Lite baseball pitching and fielding machine\u003c\/li\u003e \u003cli\u003eSteel leg assembly with tripod base\u003c\/li\u003e \u003cli\u003eAC power cord\u003c\/li\u003e \u003cli\u003eOwner's manual\u003c\/li\u003e \u003cli\u003eSupport stakes\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eLite baseballs, automatic ball feeder, and battery pack are sold separately. Most families add a dozen or two of Power Alley 40 mph or 60 mph lite baseballs and the Power Alley 12 Ball Automatic Baseball Feeder for continuous solo sessions.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eDoes it pitch real baseballs?\u003c\/h3\u003e \u003cp\u003eNo. This model is designed for lite baseballs only. For real-baseball practice, the Power Alley Pro real-baseball pitching machine throws regulation baseballs up to 45 mph and lite baseballs up to 60 mph.\u003c\/p\u003e \u003ch3\u003eHow does it throw curveballs and sliders?\u003c\/h3\u003e \u003cp\u003eThe swivel head rotates to tilt the release angle. A slight tilt creates a curveball shape as the ball rides the wheel with a side spin. Different tilt angles produce slider and curve movement. The ball does not break like a real pitched curveball, but the visual shape out of the machine gives hitters breaking-pitch tracking work.\u003c\/p\u003e \u003ch3\u003eHow does the fielding mode work?\u003c\/h3\u003e \u003cp\u003eRaise the head angle upward and the machine launches fly balls and pop-ups. Level it for line drives. Lower it toward the ground for grounders. Combine the tilt with the 360-degree swivel and one player at the machine can send balls to any spot in the yard or small field.\u003c\/p\u003e \u003ch3\u003eCan I use it indoors?\u003c\/h3\u003e \u003cp\u003eYes, in spaces with at least 10 to 12 feet of overhead clearance for fly balls and a safe net or cage enclosure. Garages and barns work well. For basement use, check ceiling height first since fly-ball mode needs height.\u003c\/p\u003e \u003ch3\u003eHow many balls should I buy with it?\u003c\/h3\u003e \u003cp\u003ePlan on one to two dozen lite baseballs for solo sessions. With a partner to pick up between rounds, a dozen is enough. With an auto-feeder and no ball retrieval partner, two dozen lets you run a full 6-minute round of 72 pitches before reloading.\u003c\/p\u003e \u003ch3\u003eCan a young kid operate it alone?\u003c\/h3\u003e \u003cp\u003eThe machine itself is simple to operate, but youth should always have adult supervision during setup and running. The enclosed wheel is safer than an open-wheel machine, but any pitching machine merits adult oversight for younger kids.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC cleared due to Excel scientific-notation corruption in input --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334083871035,"sku":"T04-PA99_360","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/power-alley-360-lite-baseball-pitching-fielding-machine-htm-5.jpg?v=1781231901"},{"product_id":"power-alley-lite-360-12-inch-softball-machine","title":"Power Alley Lite 360 12 inch Softball Machine","description":"\u003cdiv\u003e \u003cp\u003eThe Power Alley Lite 360 12 inch Softball Machine is a variable-speed fastpitch and slowpitch training machine built around lite 12-inch softballs, a 360-degree swivel throwing head, and a 1\/8 horsepower electric motor. It pitches up to 50 mph with fastpitch and slowpitch style deliveries, launches fly balls and grounders for fielding work, and weighs 13 pounds for easy one-person transport between the garage and the yard. Recommended for ages 8 through adult, the Power Alley Lite 360 is a practical pick for home softball hitters and small fastpitch programs that want one machine covering both batting practice and defensive drills.\u003c\/p\u003e \u003ch2\u003eFastpitch and Slowpitch from One Machine\u003c\/h2\u003e \u003cp\u003eThe Power Alley Lite 360 throws both fastpitch deliveries and a slowpitch-style 12-foot arc. A speed dial from 0 to 10 gives continuous adjustment from slow contact work for a beginner all the way up to 50 mph timing pitches for older fastpitch hitters. Slowpitch hitters set the head angle for an underhand arc and work on timing the drop. Fastpitch hitters run straight deliveries out of the swivel head at higher speeds. One machine, one wall outlet, both softball styles.\u003c\/p\u003e \u003ch2\u003e360-Degree Swivel Throwing Head\u003c\/h2\u003e \u003cp\u003eThe throwing head pivots through a 30-degree swivel range inside the full 360-degree rotation, which lets a coach send any pitch type without moving the unit. Fastballs go straight into the strike zone. Curves come out with a slight tilt, drop balls dive in with the head angled downward, and sliders move laterally. Hitters see varied pitch shapes inside the same batting round, which matches real-game tracking work better than a fixed-angle single-speed machine.\u003c\/p\u003e \u003ch2\u003ePop-Ups, Line Drives, and Grounders for Fielding\u003c\/h2\u003e \u003cp\u003eTilt the head upward and the machine throws pop-ups and fly balls for outfielders working on tracking and route reads. Level it for line drives. Angle it down and the machine launches grounders for infielder footwork, backhand picks, and throw-outs. A single coach can run a hitting block, then flip the head angle and run a defensive block for the same player or a second athlete. For backyard practice with limited adult help, that two-in-one design is the reason most families pick this machine over a hitting-only unit.\u003c\/p\u003e \u003ch2\u003eVariable Speed from 0 to 50 MPH\u003c\/h2\u003e \u003cp\u003eA ten-position speed dial gives granular control. Lower speeds (positions 1 to 3) suit beginners doing slow-pitch contact work. Middle speeds (4 to 6) cover most youth and middle-school fastpitch practice around 25 to 35 mph. Upper speeds (7 to 10) scale up to 50 mph for older fastpitch hitters working on bat speed and timing. Speed stays stable within a round instead of drifting, which is what makes machine batting practice better than live toss for detecting swing flaws.\u003c\/p\u003e \u003ch2\u003eFully Enclosed 6-Inch Safety Wheel\u003c\/h2\u003e \u003cp\u003eThe throwing wheel is fully enclosed in a solid housing that protects fingers during ball loading and keeps softballs tracking cleanly through the release. For youth practice, enclosed-wheel construction is the baseline safety feature to look for in a home machine. The housing is built for daily home use rather than commercial facility abuse, and the 1\/8 HP motor is sized to match.\u003c\/p\u003e \u003ch2\u003eLightweight Build for Real Backyard Use\u003c\/h2\u003e \u003cp\u003eAt 13 pounds and shipping dimensions of 19.5 inches long by 14 inches wide by 13.75 inches tall, the Power Alley Lite 360 is genuinely portable. One adult can carry it to the backyard, set the tripod legs, plug it into an outlet or a battery pack (sold separately), and be pitching in under five minutes. Most team machines in this price range are heavier and harder to move for a single person; this one is built around a home fastpitch player who wants to pull it out of the garage for a 20-minute session. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003ch2\u003eWho This Softball Machine Is For\u003c\/h2\u003e \u003cp\u003eThe Power Alley Lite 360 fits families with fastpitch hitters ages 8 through high school, travel-softball players who need daily at-home reps, and small programs sharing one machine across a practice. The 50-mph top speed covers middle-school fastpitch timing and most early high-school work. For college-level fastpitch velocity or elite-level breaking pitch training, a higher-tier dual-wheel machine is a better fit. For slowpitch practice, the arc delivery and variable speed handle standard slowpitch timing work.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eOn the hitting side the machine covers fastpitch batting practice, slowpitch arc hitting, situational drills such as bunt, slap, and drag, timing work at different speeds, and pop-up pitch tracking. On the fielding side the 360-degree swivel and adjustable tilt send grounders for infielder work, line drives for outfield reads, and pop flies for tracking drills. With an automatic ball feeder accessory and a backstop net, one player can run a solo fastpitch session of continuous rounds without a partner feeding.\u003c\/p\u003e \u003ch2\u003ePower Alley Lite 360 Softball Machine Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePitch speed: 0 to 50 mph with variable control\u003c\/li\u003e \u003cli\u003eBall compatibility: lite 12-inch softballs\u003c\/li\u003e \u003cli\u003ePitch types: fastpitch, slowpitch arc, fastball, drop, curve, slider via swivel head\u003c\/li\u003e \u003cli\u003eHead swivel: 30 degrees within 360-degree rotation for angle selection\u003c\/li\u003e \u003cli\u003eMotor: 1\/8 HP AC electric, durable build\u003c\/li\u003e \u003cli\u003ePower: standard 110V AC wall outlet or optional battery pack (sold separately)\u003c\/li\u003e \u003cli\u003eSafety: fully enclosed 6-inch solid throwing wheel\u003c\/li\u003e \u003cli\u003eWeight: 13 lbs\u003c\/li\u003e \u003cli\u003eDimensions: 19.5 in L x 14 in W x 13.75 in H\u003c\/li\u003e \u003cli\u003eLegs: tubular steel with rubber tips\u003c\/li\u003e \u003cli\u003ePitch height: adjustable for grounders and fly balls\u003c\/li\u003e \u003cli\u003eRecommended age: 8 years to adult\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePower Alley Lite 360 12 inch softball pitching and fielding machine\u003c\/li\u003e \u003cli\u003eTubular steel leg assembly\u003c\/li\u003e \u003cli\u003eAC power cord\u003c\/li\u003e \u003cli\u003eOwner's manual\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eLite 12-inch softballs, automatic ball feeder, and battery pack are sold separately. Most buyers add a dozen Power Alley 12 inch Lite Softballs and the Power Alley 360 12 Inch Softball Automatic Feeder for continuous solo sessions.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eDoes it throw regulation 12-inch softballs or only lite balls?\u003c\/h3\u003e \u003cp\u003eThis model is designed for lite 12-inch softballs, which run about one-quarter the weight of a regulation softball. The lite weight lets the machine reach higher speeds safely in a home setting and extends wheel life compared to a regulation-weight ball through the same housing.\u003c\/p\u003e \u003ch3\u003eCan fastpitch hitters actually train timing against a 50-mph machine?\u003c\/h3\u003e \u003cp\u003eYes, with a reduced distance. Set the machine at a shorter throw distance to compress the reaction time and a 50-mph pitch feels like a faster pitch from the regulation rubber. Moving the machine 5 to 8 feet closer than regulation distance gives timing work roughly equivalent to 60 to 65 mph from the mound.\u003c\/p\u003e \u003ch3\u003eHow does the 360-degree swivel work for fastpitch drop balls?\u003c\/h3\u003e \u003cp\u003eAngle the head slightly downward and the wheel imparts topspin, which gives a drop-ball shape as the softball approaches the plate. Fastpitch hitters can train tracking reads against that drop shape inside the same round as straight fastballs and curves.\u003c\/p\u003e \u003ch3\u003eIs the battery pack necessary?\u003c\/h3\u003e \u003cp\u003eOnly if you need to run the machine away from an outlet. For backyard, garage, or home-field setups with a power outlet within cord reach, the standard 110V AC cord covers everything. For fields or parks without outlets, the separately sold Heater battery pack gives about one full practice session of continuous use.\u003c\/p\u003e \u003ch3\u003eHow loud is it during use?\u003c\/h3\u003e \u003cp\u003eRoughly the volume of a household fan. Backyard and indoor use does not disturb neighbors. The louder sound is the softball impact on the backstop net, not the machine itself.\u003c\/p\u003e \u003ch3\u003eCan one person set it up?\u003c\/h3\u003e \u003cp\u003eYes. At 13 pounds the machine is a one-person carry. Tripod legs snap in, the ball chute seats on top, and the AC cord plugs into a wall outlet. Most first-time setups take under five minutes without tools.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC cleared due to Excel scientific-notation corruption in input --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334084165947,"sku":"T04-PASOFT199_360","price":159.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/power-alley-lite-360-12-inch-softball-machine-htm-5.jpg?v=1781231901"},{"product_id":"power-alley-pro-real-baseball-pitching-fielding-machine","title":"Power Alley Pro Real Baseball Pitching \u0026 Fielding Machine","description":"\u003cdiv\u003e \u003cp\u003eThe Power Alley Pro Real Baseball Pitching and Fielding Machine is a real-ball upgrade from the lite-ball Power Alley 360, built around a 1\/8 horsepower motor, adjustable pitch height, a fully enclosed safety wheel, and a nylon-fiberglass housing that keeps the unit light enough to move but rugged enough for regular home use. It pitches regulation baseballs up to 45 mph and lite baseballs up to 60 mph, which covers tracking and timing work for hitters from about 8 years old through middle school and early high school. Fielding modes throw grounders and pop-flies using the same machine, so one purchase covers both sides of baseball practice. Recommended for ages 8 through adult.\u003c\/p\u003e \u003ch2\u003eReal Baseballs, Not Only Lite Balls\u003c\/h2\u003e \u003cp\u003eThe difference between the Power Alley Pro and the lite-ball-only Power Alley 360 matters at game time. Training against real regulation-weight baseballs gives hitters timing and flight reads that carry directly into game at-bats. Lite-ball machines do a lot right, but the ball flight feels different on the release and comes off the bat differently at contact. For hitters who want at-home practice that matches what they see from a real pitcher, the Power Alley Pro is built for it. The machine also accepts lite baseballs when you want higher speeds at 60 mph for bat-speed overload work.\u003c\/p\u003e \u003ch2\u003eSpeed Ranges for Two Ball Types\u003c\/h2\u003e \u003cp\u003eReal baseballs: up to 45 mph. The regulation baseball's weight and seam profile ride the wheel at a predictable release but at lower top-end than a lighter ball. For 8-to-14-year-old baseball hitters training regulation baseball timing, 45 mph is the realistic ceiling this machine delivers consistently.\u003c\/p\u003e \u003cp\u003eLite baseballs: up to 60 mph. Lite-weight training baseballs spin up faster through the wheel, so the same machine pushes 60 mph with the lighter ball. Coaches use this for high-school hitters working bat speed against faster pitches, and for younger hitters working tracking at higher velocities without the real-ball impact risk.\u003c\/p\u003e \u003ch2\u003ePitching and Fielding in One Machine\u003c\/h2\u003e \u003cp\u003eAdjust the pitch height knob and the release point moves from strike-zone level up to pop-up angles. Lower the angle below level and the machine rolls grounders out to an infielder. Level it for line drives to an outfielder. Raise it steeply for fly balls. A single coach, parent, or older sibling can run a hitting block, then pivot to a defensive block in the same session. That is the use case families cite most when buying this machine over a hitting-only unit.\u003c\/p\u003e \u003ch2\u003e1\/8 HP Motor and Durable Housing\u003c\/h2\u003e \u003cp\u003eThe 1\/8 horsepower AC motor is sized for home baseball practice. It runs continuously for long rounds and handles the repeated impact of real baseballs without overheating. The housing uses a nylon-fiberglass composite rather than heavy steel, which keeps the machine portable without losing structural durability. A built-in circuit breaker protects the electrical system from power surges during daily use.\u003c\/p\u003e \u003ch2\u003eFully Enclosed Safety Wheel\u003c\/h2\u003e \u003cp\u003eThe throwing wheel is fully enclosed in the housing. For families loading baseballs during practice with younger hitters, enclosed-wheel design is the safety baseline. The wheel spins at high RPM during operation, so open-wheel machines are a finger hazard during loading; this machine eliminates that risk. The enclosed wheel also keeps the release path consistent, because balls enter the throwing head from a fixed position rather than being hand-placed near a moving wheel. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003ch2\u003eWho This Baseball Machine Is For\u003c\/h2\u003e \u003cp\u003eThe Power Alley Pro fits families with baseball hitters ages 8 through early high school who want real-baseball timing practice at home, travel-team players logging daily reps during the season, and small programs running shared batting-practice stations. The 45-mph real-baseball speed is appropriate for the training ranges most 8-to-14-year-old hitters work at. For older high-school or college hitters needing 70-plus mph real-baseball timing, a heavier-duty machine like the Blaze Combo is a better fit. For softball-only households, the PASOFT199_360 is the match.\u003c\/p\u003e \u003ch2\u003eTraining Applications\u003c\/h2\u003e \u003cp\u003eOn the hitting side the machine supports real-baseball batting practice rounds, situational hitting drills (bunt, hit-and-run, two-strike), timing work at different speeds, soft-toss replacement when the machine is off, and overload\/underload sessions alternating real and lite baseballs for bat-speed work. On the fielding side the angle adjustment sends grounders at 25 to 40 mph for infielder footwork and backhand drills, line drives for outfielder reads, and fly balls for tracking practice. Catchers can work on blocking using low-angle pitches short of the plate.\u003c\/p\u003e \u003ch2\u003ePower Alley Pro Specifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePitch speed with real baseballs: up to 45 mph\u003c\/li\u003e \u003cli\u003ePitch speed with lite baseballs: up to 60 mph\u003c\/li\u003e \u003cli\u003eBall compatibility: real regulation baseballs and lite baseballs\u003c\/li\u003e \u003cli\u003ePitch types: fastballs, grounders, pop-flies via pitch height adjustment\u003c\/li\u003e \u003cli\u003eMotor: 1\/8 HP AC electric\u003c\/li\u003e \u003cli\u003ePower: standard 110V AC wall outlet or optional portable battery pack (sold separately)\u003c\/li\u003e \u003cli\u003eSafety: fully enclosed throwing wheel, built-in circuit breaker\u003c\/li\u003e \u003cli\u003eConstruction: lightweight nylon-fiberglass housing\u003c\/li\u003e \u003cli\u003ePitch height: adjustable\u003c\/li\u003e \u003cli\u003eStand: durable steel tripod\u003c\/li\u003e \u003cli\u003eRecommended age: 8 years to adult\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePower Alley Pro real-baseball pitching and fielding machine\u003c\/li\u003e \u003cli\u003eOne lite baseball\u003c\/li\u003e \u003cli\u003eDurable steel tripod stand\u003c\/li\u003e \u003cli\u003eAC power cord\u003c\/li\u003e \u003cli\u003eInstruction manual\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAdditional baseballs (real or lite), the Power Alley 12 Ball Automatic Baseball Feeder, and the portable battery pack are sold separately. Most buyers add the auto-feeder for solo batting practice plus a dozen or two pitching-machine baseballs so rounds can run continuously.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eHow does this compare to the Power Alley 360 Lite?\u003c\/h3\u003e \u003cp\u003eThe Power Alley 360 Lite pitches only lite baseballs and includes a 360-degree swivel head for varied pitch types. The Power Alley Pro pitches real regulation baseballs up to 45 mph and lite baseballs up to 60 mph, with adjustable pitch height but without the swivel. For real-ball timing practice at home, the Pro is the better fit; for lite-ball variety across fastballs, curves, and sliders, the 360 Lite is the better fit. Many families buy both over time, starting with the Lite for younger kids and adding the Pro when hitters need real-baseball reps.\u003c\/p\u003e \u003ch3\u003eIs 45 mph real-baseball speed enough for a 12-year-old?\u003c\/h3\u003e \u003cp\u003eYes. Most 12-year-old baseball hitters see pitches in the 45-to-60-mph range in competitive youth baseball, and the Power Alley Pro is in that window for real-ball work. Use lite-baseball mode at 60 mph for bat-speed overload when the hitter is ready to train faster timing without the real-ball impact risk.\u003c\/p\u003e \u003ch3\u003eCan it throw curveballs?\u003c\/h3\u003e \u003cp\u003eNo. This is a single-wheel fastball machine with adjustable pitch height. For curveballs and breaking pitches, look at dual-wheel or three-wheel machines.\u003c\/p\u003e \u003ch3\u003eCan I use my own baseballs?\u003c\/h3\u003e \u003cp\u003eYes, regulation leather baseballs and lite training baseballs both work. Heavy-duty pitching-machine baseballs extend the wheel's life compared to softer recreational baseballs because they hold shape better through repeated impact.\u003c\/p\u003e \u003ch3\u003eDoes it work with an automatic ball feeder?\u003c\/h3\u003e \u003cp\u003eYes. The Power Alley 12 Ball Automatic Baseball Feeder (PA49B) is the matched accessory. It holds 12 baseballs and drops one every 9 seconds, which converts the machine into a solo practice setup.\u003c\/p\u003e \u003ch3\u003eHow long does setup take?\u003c\/h3\u003e \u003cp\u003eUnder five minutes for an experienced user. The tripod legs snap into the machine body, the ball chute seats on top, and the AC cord plugs into a wall outlet. First-time setup takes a little longer while reviewing the manual.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC cleared due to Excel scientific-notation corruption in input --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334084428091,"sku":"T04-PAPRO149","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/power-alley-pro-real-baseball-pitching-fielding-machine-htm-4.jpg?v=1781231902"},{"product_id":"power-alley-seamed-60-mph-white-lite-baseballs","title":"Power Alley Seamed 60 MPH White Lite Baseballs","description":"\u003cdiv\u003e \u003cp\u003ePower Alley Seamed 60 MPH White Lite Baseballs come one dozen per pack and add a painted, slightly indented seam pattern to the lite-baseball design, which gives hitters a more realistic regulation-baseball look on release without the impact risk of a real ball at higher pitch speeds. Each baseball measures regulation 9 inches, weighs 2.1 ounces, and is speed-rated up to 60 mph for use with Heater lite and real baseball pitching machines. Good fit for timing and tracking drills where the visual cue of a seamed ball matters. Backed by a 1-year manufacturer warranty against defects.\u003c\/p\u003e \u003c\/div\u003e \u003c!-- FLAG: UPC cleared due to Excel scientific-notation corruption in input --\u003e","brand":"Heater Sports","offers":[{"title":"Default Title","offer_id":51334084591931,"sku":"T04-SLB19_SEAMED","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/files\/power-alley-seamed-60-mph-white-lite-baseballs-htm-2.jpg?v=1781231902"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/4658\/8987\/collections\/heater-sports_1413175487__59982.jpg?v=1781350991","url":"https:\/\/www.hittingstore.com\/collections\/heater-sports.oembed","provider":"HittingStore","version":"1.0","type":"link"}